SWorkz S35-GTE Manuel utilisateur
2
1. S35-3E Series Brushless Power T-7075 Aluminum Lightened Main Chassis with
L.F.C system (Lower Friction Coefficient)
2. S35-3E/GTE Series Competition Rear Lower Arm Set.
3. S35 Series Competition Aluminum Rear Hubs.
4. S35-3 Series Competition Steering Plate.
5. S35-3 Series Competition Aluminum Steering Knuckle Plates.
6. S35-GT/GTE series GT-BBS (GT Big Bore Shocks) Pro Shock System with GT Silver
Line Spring sets.
7. S35 Series BBS Emulsion Shock Caps.
8. S35-GT/GTE Series Front and Rear Pro Shock Tower for GT BBS shocks.
9. S35-3 Series Special Lightened 6mm Axle Wheel Hub system.
10. S35-3 Series 6mm Axle Universal Cross Drive Shafts.
11. New Center Diff transmission drive shaft system.
12. S35-3 Series Aluminum Rear Lower Fully Adjustable Toe-In Block system.
13. S35-3 Series Pro-composite Carbon Front Upper Arm Covers.
14. S35-GT/GTE On Road Bumper and rear body poster system.
INTRODUCTION
Based on the latest SWORKz S35-3E platform, SWORKz further developed and improved the
E-GT and came up with the S35-GTE.
The S35-GTE is the ultimate SWORKz 1/8th electric on road GT car at this moment. Its new
rear suspension design and front ackerman steering system came directly from the 1/8th S35-
3E electric buggy. A new center transmission system gives all round improvements to the S35-
GTE.
The S35-GTE newly designed arms are made from a strong standard nylon material. Optional
carbon covers are available to adjust the arm's stiness.
A new front Ackerman steering system and new front shock tower design allow you to change
the front upper angle positions with ease.
The T-7075 aluminum chassis with its new design L.F.C (Lower Friction Coecient) system will
give more grip and at the same time less friction for the rear.
The S35-GTE includes high quality parts, a rened shock system and many option parts.
The SWORKz S35-GTE Pro Kit comes standard with many SWORKz Factory Team Option
Parts.
SWORKz utilizes only the highest quality materials and industry leading manufacturing
processes resulting in a faster, stronger, and more reliable vehicle. The S35-GTE Pro Kit has
been designed to win races.
Congratulations on your purchase of the new SWORKz S35-GTE 1/8 scale on-road racing GT
pro kit.
Please read this manual thoroughly before you attempt to start running your S35-GTE. This
manual contains step-by-step instructions to help you complete, prepare for startup, and ne-
tune your Buggy. Updates, setups, and product news will be posted on our website (www.
sworkz.com) or SWORKz RC Face Book page.
As always, if you should ever have any questions or need help with your S35-GTE, please feel
free to contact our ocial SWORKz dealers and distributors, as they will be glad to help you.
You may also contact us at any time for the most up to date information and support.
S35-GTE Kit Features:
3
WARRANTY
Your SWORKz S35-GTE kit warranty covers workmanship and manufacturing
defects of the original and unmodified parts. Warranty claims resulting from
crashes, abuse, improper operation, improper mounting, improper adjustment or
lack of maintenance will not be honored.
Contact your local hobby shop or SWORKz distributor for all claims and
questions. Claims must be well documented. All Claims are subject to expert
examination approval by SWORKz.
Specification
Length: 490mm
Width: 308mm
Height: 145mm
Ground Clearance: 15mm
Wheelbase: 325-330mm
Track: F:302mm / R:306mm
Gear Ratio:
C:45-47/17T, F/R:43/13T
Weight:
3650g (With battery/Body shell)
4
INDEX
This radio controlled racing car is not a toy!
This high-performance R/C model is recommended for ages 14 and older.
INTRODUCTION 2
Warranty 3
Required Equipment for Operation 5
Operation Guide 6
Assembly Steps 7-32
Set-up Sheet 33
Blank Set-up Sheet 34-36
S35-GTE Key No. List 37-38
S35-GTE Spare Part List 38-39
S35-GTE Option Part List 39
End cover 40
5
Charger and LiPo Battery
Double-sided tape
Paint
Long nose pliers
Modeling knife
Instant cement Thread lock
Included items
Hex wrench
1.5mm
2mm
2.5mm
1.5mm
2mm
2.5mm
Glow plug wrench
Screwdriver
Screwdriver
Radio Gear
Stick Type
ESC system
Wheel & Trigger Type
Receiver
Steering servo
Tools Recommended
Breshless Motor
Side cutter
Curved scissors
Grease
Required Equipment for Operation
6
overturn
Assemble for
4 sets
Assemble for
2 sets
Assemble both left
and right sides
Assemble in the
specied order
Assemble front
and rear
Thread Locking
Compound
Grease Pure Silicone Oil Air lter oil
Operation Guide
Safety Precautions
The SWORKz S35-GTE is a high performance radio controlled model which needs to be
operated with caution and common sense.
The S35-GTE Pro Kit is not intended for children under the age of 14 without adult
supervision. SWORKz shall not be held liable for any loss or damages, whether direct,
indirect, act of nature, arising from the abuse or misuse of this product or any other product
required while operating this model.
- The LiPO Battery can be dangerous is improperly handled.
- Always keep your LiPO Battery in a cool area and never use near flame, sparks, or while
smoking.
- Keep your LiPO Battery, and all other ammables, out of the reach of children.
- After running your car, all parts of the Motor and ESC can become extremely hot. Be careful
not to touch these parts.
- This model is controlled by your radio and that is vulnerable to interference from many
outside sources. This interference can cause a loss of control so it is necessary to operate this
model in an open area to avoid personal, or property damage. Always ensure turning on your
radio rst.
- Keep all the products included in the package out of reach of children.
- This model contains many fast rotating parts. Never touch them during operation.
- Follow the instruction included with your radio gear.
- Never operate your model near people or property. The speed of this model has the
potential for injury and or damage to people and or property.
- Always use original SWORKz spare and option parts.
- Always encure the buggy is in proper working condition before use.
- Always exercise caution when using any and all tools.
7
BAG B1
2
330014A
116006
330015
320003 400002
330013
320004
101004
101004
320004
101004
101004
610002
210002A
116006
330780
330015
320003
400002
330015
Pin M2.2x9.9mm x4
400002
O-ring S5 4.8X1.5 x4
116006
Ball Bearing 8x16x5mm x4
101004
Washer 3.5X10X0.2mm x8
330013
Bevel Gear Shaft x4
Fill the differentials
with oil up to 80%
above the satellite
gears.
Put the SWORKz
Di. Oil 7000cps
for the front Di.
and 3000cps for the
rear Di.
Remember to apply a light coat
of grease to the o-ring, then
slide it over the shaft of the out
drive and seat it in the di case.
Insert the pin through the hole
in the di case and through the
hole in the shaft of the out drive.
OK! NG!
108003
108003
330014A
108003
M3x10mm FH/ST HEX Screw x4
8
4
3
BAG C
116006
330017
320003 400002
330015
108003
320004 330013
610002
108003
320004
101004
101004
108007
108007
101004
101004
2501469-01 (45T)
2501469-02 (46T)
2501469-03 (47T)
210002A
116006
330017
330241
330015
320003
400002
108003
M3x10mm FH/ST HEX Screw x4
116006
Ball Bearing 8x16x5mm x2
330015
Pin M2.2x9.9mm x2
400002
O-ring S5 4.8X1.5 x2
101004
Washer 3.5X10X0.2mm x4
330013
Bevel Gear Shaft x2
Fill the
dierentials
with Oil up to
80% full.
Use SWORKz
Di. Oil
7000cps for
the center
Di.
Apply a light coat of grease
to the o-ring, then slide it over
the outdrive shaft and place it
in the di case.
Insert the pin through the hole
of the out drive.
108007
M3x6mm FH/ST HEX Screw x4
9
5
BAG DPro Tip:
Before installing the M4x4 set screw (104011),
remember to clean the set screw and center driver joint (330661) rst.
Then apply TLC on the set screw.
Note:
The aluminum front lower arm holder (330215A) can oer 0° or 1°
kick-up for your front lower suspension.
You may use the inserts 2503260-14 to get 0°
kick-up or 2503260-15 to get 1° for your front lower suspension.
2503260-14 Front Lower Aluminum Arm Holder Inserts (0 degree)
2503260-15 Front Lower Aluminum Arm Holder Inserts (1 degree)
Note:
101018SHIM 13x16x0.2mm
Please use 13x16x0.2mm shims
to adjust the play between the
crown gear and pinion gear.
Standard suggestion is 1pc shim
on the di crown gear side and
2pcs on the other side.
101018
101018
104011
108001
108001
108001
106016
106016
108001
M3x12mm FH/ST HEX Screw x4
101018
SHIM 13x16x0.2mm
330781
116016
Ball Bearing 5x11x4mm x2
104011
M4x4mm Set Screw (Flat Bottom) x1
330215A
330661
2503261-3
2503261-2
x3
10
6
7
106005
Left
Right
BAG E1
106005
M3x15mm Hex Socket OH/TP Screw x2
106021
M4x10mm Hex Socket OH/TP Screw x2
Pro Tip:
Before installing the M4x4 set screw
(104011), remember to clean the set screw
and center driver joint (330661) rst.
Then apply TLC on the set screw.
101018
330781
108001
101018 108001
108001
108001
M3x12mm FH/ST HEX Screw x4
101018
SHIM 13x16x0.2mm
116016
Ball Bearing 5x11x4mm x2
104011
M4x4mm Set Screw (Flat Bottom) x1
104011
2503263-2
106021
2503263-2
330134
330136
2501121C-6
330769
Note:
101018SHIM 13x16x0.2mm
Please use 13x16x0.2mm shims to adjust the play between the crown gear and pinion gear.
Standard suggestion is 1pc shim on the di crown gear side and 2pcs on the other side.
116016
116016
x3
2503261-3
2503261-2
Table des matières
