SwitchBot W0701600 Manuel utilisateur
1. In the Box
2. Device Instruction
3. Preparation
4. Installation
5. Control
6. Settings
7. Charging, Firmware and Factory Reset
8. Specification
9. Return and Refund Policy
10. Contact and Support
02
03
04
05
13
19
21
23
25
26
Contents
Want to see how it’s done?
Go to support.switch-bot.com for
installation videos and additional tips.
01
Device Instruction
03
In the Box
02
Clip
Hook Wheel
*One Hook is attached to the Main Body upon delivery.
Type-C Cable
Hook Wheel
Attachment
Main Body Hook Pair* (U Rail)
Motor Hook Wheel
Hook Clip
Hook
Reset Button
Type-C
Charging Port
Indicator Light
& Light Sensor
0504
InstallationPreparation
• A smartphone or tablet with Bluetooth 4.2 or above
• Download the SwitchBot app
• Create a SwitchBot account and sign in
• Charge Curtain for about 4 hours
•(Optional) If you intend to use the Cloud Service feature,
you need to set a SwitchBot Hub Mini (sold separately) up
and connect your phone to the internet
Step 1: Add Curtain in the app
Create a SwitchBot account and sign in from the app's
Profile page. Then add Curtain to your account. Learn more
at, support.switch-bot.com/hc/en-us/articles/360052119093
Step 2: Install on Your Curtain Track
The Hook Pair has been attached with a set of Hook Wheels
upon delivery. In the box, there are also several sets of Hook
Wheels that are with different sizes and are exchangeable.
Please follow the steps below to find the best matching set
of Hook Wheels.
Find out the best matching Hook Wheel
0706
1. Insert the separate Hook into the curtain rail and rotate
it by 90º.
- If the Hook cannot fit in or you cannot rotate the Hook
inside the rail, you need to replace with a smaller set of
Hook Wheels.
- If the Hook fits inside the rail, try pull it towards one side
and tilt it. If the Hook slips out easily, you need to replace
with a bigger set of Hook Wheels.
- If the Hook fits inside the rail perfectly, there is no need to
replace the Hook Wheels.
2. Replace the Hook Wheels.
a. Detach the existing Hook Wheel from a Hook.
b. Grab a Hook Wheel with the desired size. Adjust the white
wheels until you can see the metal bar. Insert the
metal bar into the tip of the Hook. You should hear a “click”
sound once it is firmly attached.
c. Replace the Hook Wheel for the other Hook by repeating
the previous steps.
0908
a. Close your curtain and then detach the end curtain
hook from the rail.
b. Insert the separate Hook into the curtain rail and rotate
it by 90º. Pull the Hook towards one side of the rail and tilt
it back and forth to double check it fits inside the rail
perfectly. If you have tried all the Hook Wheels provides
and none of them works as expected, please contact our
c. Insert both of the Curtain's Main Body (with one Hook
attached) and the separate Hook into the curtain rail
simultaneously, rotate them by 90°, and instantly attach
the separate Hook back to the Main Body. The SwitchBot
LOGO should face your room.
Install Curtain to the curtain rail
Rotate by 90º
The SwitchBot LOGO
should face your room
Method 1 Installation for Common Models
1110
Method 2 Installation for Specific Models
d. Put the curtain back in place so the Curtain is hidden.
Congratulations! You have completed the installation.
Resume to the app to calibrate Curtain.
If you have troubles with Method 1 or you know the model
of the curtain rail in your home, please visit the following
link on a web browser to find which set of Hook Wheels to
use and how to install,
For example, if your curtain rail model matches any of
the following types, scan the QR code below for detailed
information.
https://support.switch-bot.com/hc/en-us/articles/
1500012094841
Japan TOSO Elite Taiwan Ti Rail
1312
Control
Step 3: Calibration
If you use double side curtain, you need two SwitchBot
Curtains to open it from the middle. Alternatively, you can
use the auxiliary Clip we provide to turn it into a single side
curtain so that you only need one SwitchBot Curtain.
To do that, fully close the curtain so the 2 panels are closest
to each other. Connect the upper parts of the two panels by
using the Clip. Draw the curtain back and forth to make sure
the two panels move as one. Then you can refer to Step 2:
Install on Your Curtain Track on how to set the Curtain up.
Calibration is for your Curtain to adapt to your existing
curtain track. You need to calibrate before you can control it
from your phone or every time you change the Open Mode
in the app. You can also redo the calibration on Curtain's
Settings page.
Install with the Clip (Optional)
Lots of convenient ways to control, at your will.
App Control
Open and close the curtain at your
fingertip. We offer intuitive App
control for iOS and Android, with
weekly/bi-weekly updates following
feedback from you. OTA firmware
update is also available for better
user experience.
Touch & Go
Even with SwitchBot Curtain, you'd
probably still instinctively draw the
curtains by hand sometimes. When
it senses you drawing the curtain,
the SwitchBot Curtain will kick in
and do the work for you. We call
this Touch & Go.
1514
Touch & Go
Even with SwitchBot Curtain, you‘d probably still instinctively
draw the curtains by hand sometimes. When it senses you
drawing the curtain by more than 5 cm*, the SwitchBot
Curtain will kick in and do the work for you.
Voice Control and Home Automation
You can link multiple third-party services to your SwitchBot
account and control Curtain or scenes using voice commands.
You must meet the following requirements in order to
achieve voice control and automation,
•Connect your phone or tablet to the internet
•Set a SwitchBot Hub Mini up (sold separately)
For double side curtain, drawing on one side of curtain will
trigger both Curtains to open or close simultaneously.
“Touch & Go” is turned on by default. To turn off, go to
“Advanced Settings”, and turn off “Touch & Go”.
* 5 cm is the best threshold we tested because it lowers the
possibility of false trigger by your cats and dogs.
Control with SwitchBot Remote
(Sold Separately)
A wireless remote add-on for you to
place anywhere.
Voice Control and Home Automation*
Smart living is powered by your voice commands.
Wouldn't it be great to just say it?
“Alexa, close the curtain.”
“OK Google, close my bedroom curtain.”
“Hey Siri, open the living room curtain.”
* Require SwitchBot Hub Mini (sold separately).
1716
You can set up SwitchBot Scene for home automation
within the SwitchBot eco-system when you turn on the
Cloud Service within the Settings. There are unlimited
possibilities.
SwitchBot Scene
•Enable Cloud Service in Curtain's Settings page
•Link third-party services to your SwitchBot account
* Require SwitchBot Hub Mini (sold separately).
Alexa, close the curtain.OK Google, close my bedroom curtain.
Hey Siri, open the living room curtain.
Curtain MeterHub Mini
Solar Panel
Remote
Curtain
Curtain
Table des matières
Autres manuels SwitchBot Domotique
