Swiss Bionic Solutions Omnium1 2.0 CHI-System Manuel utilisateur
intelligent Lifestyle
Omnium1 2.0 CHI-System
Operating Manual
2
Important Notes for Getting Started
We congratulate you on your purchase of the Omnium1 2.0 CHI-System.
The Omnium1 2.0 CHI-System represents the latest development and applica-
tion standard in the eld of portable PEMF technology for home use.
The Omnium1 2.0 CHI-System complies with the following guidelines and
standards:
• IEC 60601-1 Electrical Safety
• IEC 60601-1-2 Tolerance of Electromagnetic Fields
This operating manual is a component of the scope of delivery.
It should be kept close at hand and remain with the system when sold.
Copyright
Copyright © 2018 Swiss Bionic Solutions Holding GmbH
All rights reserved.
No part of this manual, including the products and software described herein,
may be reproduced, transferred, transcribed, stored in a retrieval system or
translated into another language, without the implicit written permission of
Swiss Bionic Solutions Holding GmbH. Documentation stored by the purchaser
for backup purposes is excluded from this condition. This condition shall not
apply for software that has been licensed under the General Public License
(GPL) or other free open source licensing systems.
Omnium1, the Omnium1 logo and the Swissbionic Solutions Logo are trade-
marks of Swiss Bionic Solutions Holding GmbH. All other trademarks are the
property of their corresponding owners. The details of the content of this
manual may deviate from the product or the associated software. All informa-
tion in this document may be changed without prior notication.
3
Table of Contents
1. Intended Use...................................................................................................4
2. Possible Applications ......................................................................................4
3. Scope of Delivery.............................................................................................5
4. Housing and Buttons ......................................................................................7
5. Charging the Battery .......................................................................................8
6. Switching On and Off ......................................................................................9
7. Inserting and Removing the Micro SD Card ................................................10
8. Working with the Screen...............................................................................11
9. Using the Operating Buttons........................................................................12
10. Viewing in Portrait and Landscape Modes ................................................13
11. Information on the Menu...........................................................................13
12. Connecting to the Internet .........................................................................14
13. Installation...................................................................................................15
13.1 Installing / removing the battery..............................................................15
14. Activation.....................................................................................................16
15. Saving and Loading Preset Parameters .....................................................17
15.1 Saving.........................................................................................................17
15.2 Loading ......................................................................................................18
16. Starting an Application ...............................................................................18
17. Quick Start Programs..................................................................................20
18. Settings ........................................................................................................20
18.1 Users..........................................................................................................21
18.2 Autotimer ..................................................................................................21
18.3 Factory Settings.........................................................................................22
18.4 App Settings...............................................................................................22
18.5 Music Settings ...........................................................................................22
18.5 About .........................................................................................................22
19. Updating ......................................................................................................23
20. Applicators...................................................................................................23
20.1 OmniMat....................................................................................................24
20.2 OmniPad....................................................................................................24
20.3 OmniSpot...................................................................................................24
21. Cleaning and Maintenance.........................................................................25
22. Maintenance & Error Message ...................................................................26
23. Identication & Technical Data ..................................................................27
23.1 Identication .............................................................................................27
23.2 Technical Data ...........................................................................................27
24. Safety Instructions: Where You should be Careful....................................30
25. Guarantee/Warranty ...................................................................................35
4
1. Intended Use
With the Omnium1 2.0 CHI-System, very low, pulsating electromagnetic vibrations are
exposed. The characteristics of these pulse packages and the intensity levels of the
applied vibrations are no stronger than the average ux density of the Earth’s own
magnetic eld.
Use other than as described in this manual may lead to damage to the device and
should therefore be avoided.
2. Possible Applications
The Omnium1 2.0 CHI-System can be used:
• for Relaxation
• for Meditation
• for overall Wellbeing
Important Note:
The Omnium1 2.0 CHI-System is NOT a licensed or certied medical device
and therefore cannot be used for therapeutic purposes and is not intended
to support, modify, replace or restore a biological function or structure for
the purpose of treating or mitigating an illness or injury or a symptom of an
illness or injury.
5
3. Scope of Delivery
Omnium1 Tablet
Charging Equipment Earphones
6
Omnium1 2.0 Android software
(Pre-installed on the Omnium1 2.0)
OMNIUM1 2.0
OmniMat
OMNIUM1 2.0
OmniPad OMNIUM1 2.0
OmniSpot
Not included with the
Omnium1 2.0 basic set
D/A Converter 2.0 20-pin Cable Operating Manual
If any of the parts is damaged or missing, please contact your partner at Swiss
Bionic Solutions.
7
4. Housing and Buttons
1. 3.5 mm headphone jack
2. Microphone
3. Micro SD/SDHC (TF) card slot
4. DC charging cable
5. Front camera
6. 20-pin adapter connection
7. Home button
8. Touchscreen
9. Volume control
10. On/off and lock button
11. Rear Camera & LED ash
12. Battery compartment
13. Speaker
4
6
7
2
10
13
3
1
9
5
8
11
12
8
5. Charging the Battery
Before you use your Omnium1 2.0 for the rst time, the battery will need to
be charged.
1. Plug the power supply into the tablet’s power connection.
2. Plug the power supply into the wall socket. The Omnium1 2.0 display will
show a picture indicating that the device is being charged.
3. Once the battery has been completely charged, disconnect the power sup-
ply from the tablet and then from the wall socket
•• Only use the recharging unit that was supplied with your Omnium1Only use the recharging unit that was supplied with your Omnium1
2.0 tablet. Using a different power adapter could damage your tablet.2.0 tablet. Using a different power adapter could damage your tablet.
•• The input voltage between the wall socket and the adapter is 100 V to The input voltage between the wall socket and the adapter is 100 V to
240 V AC. The adapter’s output voltage is 18 V DC, 1200 mA. 240 V AC. The adapter’s output voltage is 18 V DC, 1200 mA.
•• If the battery has been completely discharged, the device may not If the battery has been completely discharged, the device may not
switch on. In this case, allow several minutes before you try again. switch on. In this case, allow several minutes before you try again.
Do NOT dispose of the Omnium1 2.0 in the standard garbage. Some
of the product components can be re-cycled and re-used. The symbol
with the cross-out garbage container indicates that the product does
not belong in the standard garbage. Ask about the disposal guidelines
and laws in your region.
BILD
9
6. Switching On and Off
How to switch your Omnium1 2.0 on:
• Press the on/off button on the top for several seconds.
• As soon as the device has booted, the lock screen will appear. Use your n-
ger to drag the lock symbol to one side in order to unlock the screen. Your
Omnium1 2.0 will now display the home screen.
Once the Omnium1 2.0 has been switched on, you can use the on/off button
(10) to activate the power-saving mode or return to standard mode.
After several minutes of non-use, the Omnium1 2.0 will switch to power-sav-
ing mode (the interval can be set from Settings => Display => Sleep). You can
also exit power-saving mode by pressing the on/off button.
How to switch your Omnium1 2.0 off:
• Press the on/off button down until a conrmation message appears.
Touching the Power off symbol will switch the device off completely.
How to re-start your Omnium1 2.0:
• Press the on/off button down until the Omnium1 logo appears on the dis-
play.
SAFE TEMPERATURE RANGE: The Omnium1 2.0 may only be operated in
an environmental temperature range between 0 °C and 35 °C.
When you switch your new Omnium1 2.0 on for the rst time, we re-
commend that you rst make several important settings on your Omni-
um1. These include setting the language (Settings => System => Lan-
guages & input => Languages => Add a language) as well as setting
your time zone and the time format (Settings=> System => Date &
time).
10
7. Inserting and Removing the Micro SD Card
Insert a micro SD memory card (max. 32 GB) in the card slot as shown in the
picture of the device. Do not push hard or use any force. The card only needs
to overcome a light spring resistance. Once the memory card is properly posi-
tioned, it will lock into place instead of being ejected.
To remove the memory card, press it into the device until the spring releases
and then pull the card out.
To prevent the loss of data, the micro SD card should only be inserted
or removed after the tablet has been switched off. Optionally, you can
remove the micro SD card with the tablet switched on, once you have
rst deactivated the card. To do that, open the Settings and then click
Storage. Then, tap on Unmount SD card in the window on the right
and click OK.
Table des matières
Manuels Produit de soins personnels populaires d'autres marques
HiB
HiB Spectre 50 Manuel utilisateur
Carex
Carex SunLite Manuel utilisateur
Roper Rhodes
Roper Rhodes Intense Manuel de la liste des pièces
Interacoustics
Interacoustics Titan IMP440 Instructions d'utilisation et de sécurité
ReTrak
ReTrak VS001 Manuel utilisateur
LED Technologies
LED Technologies dpl PAIN RELIEF Joint Wrap Manuel utilisateur
