Swimovate pool mate live Manuel utilisateur
v1.01
Contents
Welcome.........................................................2
Overview........................................................3
......................... ........4
Setting the Time...............................................6
Setting theAlarm.............................................6
Reviewing your sessions...............................10
Deleting logs.................................................12
Chrono......................................................... 12
Selecting your settings...
Setting the Vibration alarm..............................7
Swimming.....................................................8
Changing the battery.....................................10
Uploading to a computer................................13
Software setup .................................................14
Uploading........................................................15
Software operation...........................................16
Adding and deleting..........................................23
FAQS...............................................................24
Firmware update..............................................25
Care and Maintenance....................................26
Warranty...........................................................26
Certification......................................................27
PoolMateLive 1
Warning: Always consult your doctor or physician before you begin or modify any
exercise program.
Short press- Start
Hold 2 secs- Stop/exit
current menu
Adjusts settings and
features to display
Hold for Backlight
Welcome to the PoolMateLive Manual
Scrolls through top
line functions
Important notes:
1. Your PoolMateLive has been designed for lap swimming in a pool. It
has not been designed to work in Open Water.
2. The PoolMateLive detects regular stroking patterns that conform to
FrontCrawl, BreastStroke, BackStroke or Butterfly strokes only, the
PoolMateHr must be put into PAUSE mode when doing drill and kick
sets.
3. Strokes must only be changed at the end of a lap, not part way
through a lap or inaccurate lap and stroke counts may be recorded.
4. The stroke count displayed is the number of strokes taken by the arm
you wear the PoolMateLive on. Remember when swimming FrontCrawl
and BackStroke this is half the total number of strokes.
5. Like most sports watches, the buttons are not designed to be
operated underwater. You must make sure the PoolMateLive is out of
the water before pressing any buttons. Do NOT dive in wearing the
PoolMateLive. Pressures are much greater and water may be forced
into the case.
Contents:
PoolMateLive watch
Instruction manual
PoolMateLive 2
Optional download clip available to
upload swim data to your computer
SWIM MODE,
use this when
in the pool
Overview
CHRONO
MODE, use
this for other
sports
VIEW LOGS,
see details of
recorded
sessions
SETUP MODE,
change settings
on your watch
SWIM MODE
Vibrate alarm on
CHRONO MODE
Audible alarm on
Pressing mode will take you through the different modes of operation
PoolMateLive 3
Hold Start for 2
secs at any time
to EXIT
Hold
change body weight
(will show lb if set to
Imperial)
Selecting your settings From main CLOCK screen, press Mode 3 times to show SETUP.
Press Start then you can change settings by pressing Mode to select.
change pool
length
change Units to
Imperial- yards
and lbs (Y lb)
TIME SET
menu
ALARM SET
menu
x3
PoolMateLive 4
TIP: Hold Start for 2 secs at any
time to EXIT or return you to the
main menu for that function
Hold
set the hand
you wear the
watch on
set LCD
contrast, 1 is
low
PoolMateLive 5
SET
VIBRATE
ALARM
*Changing swimmer: The PoolMateLive has been designed so up to to 3
swimmers can share one watch or families with more than one watch can use
the same PC to analyse their swims. In either case each swimmer should be
assigned a number (1, 2, or 3). The swimmer should set the assigned number on
the watch in the SETUP menu before swimming and changing weight.
Hold Down to erase
all logs, CONFIRM
will appear, hold
Down again to erase
select Hours,
Minutes,Year,
Month,Date
12/24hr
Setting the Time
From TIME SET in the SETUP
menu
Press Start
The hours will flash on the clock
display, press Up and Down to
change value.
Press Mode to select minutes,press
Up and Down to change value.
Pressing Mode again will select Year,
then month, then date, then 12/24
hour setting, press Up and Down to
change values as before.
Hold Start for 2 secs to return to
SETUP.
Hold Start again for 2 secs to return
to main menu.
hold for 2
secs to
EXIT
Hold
select Hours,
Minutes,
on/off
Setting the Alarm
Setting the Alarm to ON activates the
bell icon, above seconds on the
display. The alarm will sound each day
at the set time for one minute or until
Mode is pressed.
From ALARM SET in the SETUP
menu
Press Start - the hours will flash on
the clock display, press Up and Down
to change value.
Press Mode to select minutes,
pressing Mode again selects on or
off. Press mode again to set
BEEPER on or off (if beeper is off the
watch will only vibrate if the alarm is
switched on. Press Up and Down to
change value as before.
Hold Start for 2 secs to return to
SETUP.
Hold Start again for 2 secs to return
to main menu.
PoolMateLive 6
Setting Vibrate Alarm
From SETUP Press Start , press mode until
you see VIB SET
If the vibrate alarm is set to 4 laps for example (the default setting) it will vibrate
the watch for a couple of seconds when you are approaching the end of the 4th
lap.This can be really useful in keeping track of your laps without looking at the
watch.
To set alarm to vibrate on a Time interval
From VIB SET, press Start and VIB LAP will
show, press Up twice until you see VIB
TIME.
Press Start, the hours will flash. Press Up
and Down to change value.
Press Mode and the minutes will flash. Press
Up and Down to change value. Press Mode
again to change seconds. Hold Start to save.
To set alarm to vibrate on a different lap
count
From VIB SET press Start. VIB LAP 4 will
appear, press Start and the lap number will
flash. Press Up and Down to change value.
Hold Start for 2 seconds to save
PoolMateLive 7
The PoolMateLive has a small motor inside that will vibrate when it detects
you have swam a certain number of laps, distance or time. You will feel a
short buzz on your wrist when this occurs.
IN SUMMARY:
select setting to
change, press up and down to change value then hold Start for 2 secs to save and exit
From VIB SET press Start, press Up to choose between setting lap
interval, distance, Time intervals or turn vibration off. Press Start to
Recording a simple session
From main CLOCK screen, press Start to begin (the
SWIM icon will appear) and SWIM!
During or after the session, press Up and Down to view
Strokes, Distance(m), Calories, Efficiency Index and Set
number rather than Laps.
Press Mode to show the Elapsed time since you started
recording, press again to show the actual time of day.
Hold Start for 2 seconds to stop
Swimming
WHEN IN SWIM MODE
Hold Start for 2 seconds to
stop
PoolMateLive 8
Use Up to view
Strokes, Distance,
Calories, Efficiency
and Set number
rather than Laps
NOTE: If the watch doesn’t count any laps for 5
minutes it will turn itself off to conserve the
battery and may not save your session. So
always make sure to hold start for 2 seconds to
stop and save your session after your swim
Use Mode to view
Elapsed time and
Actual time whilst
swimming
Table des matières
Autres manuels Swimovate Fitness électronique
