SWF SB Series Manuel utilisateur
MMEEEE--110011220011
USER ’’
S MANUAL
SSuunnSSttaarr CCOO..,, LLTTDD..
Operating Manual
••SB Series
••Multi-Heads E-Series
••DM Series
••K Series
1. THIS IS AN INSTRUCTION FOR SAFE USE OF AUTOMATIC
EMBROIDERY MACHINES. READ THOROUGHLY BEFORE USE.
2. CONTENTS IN THIS INSTRUCTION MAY CHANGE, WITHOUT
PRIOR NOTICE, FOR IMPROVEMENT OF MACHINE QUALITY AND
THUS MAY NOT CORRESPOND TO THE MACHINE YOU
PURCHASED. CONTACT YOUR SALES AGENT FOR INQUIRIES.
3. THIS IS DESIGNED AND MANUFACTURED AS AN INDUSTRIAL
MACHINE. IT SHOULD NOT BE USED FOR OTHER THAN
INDUSTRIAL PURPOSE.
CCoonntteennttss
1.0 Operation Box .......................................................................................................................... 1-1
1.1 Part Name and Function ................................................................................................................................ 1-1
2.0 Basic Steps Before Starting Embroidery ............................................................................. 2-1
2.1 Embroidery Machine Power-On .................................................................................................................. 2-1
2.2 Basic Steps ..................................................................................................................................................... 2-4
3.0 Operating Program Install ...................................................................................................... 3-1
3.1.0 SWF Install Program ..................................................................................................................................... 3-2
3.1.1 Install .............................................................................................................................................. 3-2
3.1.2 Backup ............................................................................................................................................. 3-4
3.1.3 Memory ........................................................................................................................................... 3-5
3.1.4 System ............................................................................................................................................. 3-7
3.2.0 Machine Setting Change ............................................................................................................................... 3-9
3.2.1 Embroidery Machine Specifications Setting ............................................................................... 3-10
3.2.2 Machine and Signal Setting .......................................................................................................... 3-13
4.0 Operating Program Screen Layout ........................................................................................ 4-1
4.1 Embroidery Screen ........................................................................................................................................ 4-1
4.2 Work Information Screen .............................................................................................................................. 4-2
4.3 Function Menu Button Screen ...................................................................................................................... 4-3
4.4.0 Work Progress Message and Clock ............................................................................................................. 4-4
4.4.1 Work Progress Messages ................................................................................................................ 4-4
4.4.2 Date and Time Change ................................................................................................................... 4-5
5.0 Function Menu Before Embroidery Begins .......................................................................... 5-1
5.1 Structure of the Menu Before Embroidery Begins ...................................................................................... 5-2
5.2 Design Call .................................................................................................................................................... 5-3
5.3.0 Input/Output ................................................................................................................................................. 5-11
5.3.1 FDD Input ..................................................................................................................................... 5-12
5.3.2 USB Input ..................................................................................................................................... 5-17
5.3.3 CF Card Input ............................................................................................................................... 5-19
5.3.4 Serial Input .................................................................................................................................... 5-21
5.4.0 Setting ..........................................................................................................................................................5-23
5.4.1 Basic Setting .................................................................................................................................. 5-25
5.4.2 EMB Parameter Setting ................................................................................................................ 5-31
5.4.3 M/C Parameter Setting ................................................................................................................. 5-35
5.4.4 Needle Setting (color) ................................................................................................................... 5-39
5.4.5 Frame offset setting ....................................................................................................................... 5-50
5.4.6 Options Setting .............................................................................................................................. 5-52
5.4.7 The Other Settings ....................................................................................................................... 5-60
5.5.0 Ready ........................................................................................................................................................... 5-67
5.5.1 Position .......................................................................................................................................... 5-68
5.5.2 Gauge ............................................................................................................................................. 5-69
5.5.3 Exclude .......................................................................................................................................... 5-70
5.5.4 Fastview ......................................................................................................................................... 5-71
5.5.5 Trace .............................................................................................................................................. 5-74
5.6.0 Repeat .......................................................................................................................................................... 5-75
5.6.1 General Repeat ............................................................................................................................. 5-76
5.6.2 Special Repeat .............................................................................................................................. 5-89
5.6.3 Repeat Load .................................................................................................................................. 5-96
5.7.0 Edit ................................................................................................................................................................5-97
5.7.1 Stitch Edit ..................................................................................................................................... 5-98
5.7.2 Design Divide ............................................................................................................................ 5-103
5.7.3 Design Filtering ........................................................................................................................... 5-108
5.7.4 Design Zoom In .......................................................................................................................... 5-109
5.8.0 Machine ..................................................................................................................................................... 5-111
5.8.1 Machine Service .......................................................................................................................... 5-112
5.8.2 Machine Information .................................................................................................................. 5-113
5.8.3 Machine Test ............................................................................................................................... 5-113
5.8.4 Frame Origin ............................................................................................................................... 5-115
5.8.5 Error Information ....................................................................................................................... 5-116
5.8.6 Thread Break Information .......................................................................................................... 5-116
5.8.7 Memory Initial ............................................................................................................................ 5-116
5.9.0 TOOLS .......................................................................................................................................................5-117
5.9.1 Origin ........................................................................................................................................... 5-118
5.9.2 Holding ........................................................................................................................................ 5-118
5.9.3 Needle DN/UP ............................................................................................................................ 5-118
5.9.4 Language ..................................................................................................................................... 5-118
5.9.5 Sequin Lift / Sequin Feed ........................................................................................................... 5-118
5.9.6 Trim ............................................................................................................................................. 5-118
5.9.7 PF UP/DOWN ............................................................................................................................ 5-118
6.0 Function Menu During Embroidery Pause ........................................................................... 6-1
6.1 Structure of Function Menus ......................................................................................................................... 6-3
6.2 Design Call ................................................................................................................................................... 6-4
6.3 Setting ............................................................................................................................................................ 6-5
6.4 Float ............................................................................................................................................................... 6-6
6.5 Frame ............................................................................................................................................................. 6-7
6.6 Speed Code .................................................................................................................................................... 6-8
7.0 Troubleshooting ....................................................................................................................... 7-1
7.1.0 Error Messages and Handling ....................................................................................................................... 7-1
7.1.1 Main Shaft Motor and Others ......................................................................................................... 7-1
7.1.2 X, Y Motor-related Errors .............................................................................................................. 7-1
7.1.3 Color Change ................................................................................................................................... 7-2
7.1.4 Encoder ........................................................................................................................................... 7-2
7.1.5 Repeat Work .................................................................................................................................... 7-2
7.1.6 Floppy Diskette and Communications ........................................................................................... 7-3
7.1.7 Memory ........................................................................................................................................... 7-4
7.1.8 USB Memory .................................................................................................................................. 7-5
7.2 Fuse Install and Replace ................................................................................................................................ 7-6
7.3 Block Diagram ............................................................................................................................................... 7-8
11--11
①LCD Screen
It is a 6.4-inch LCD monitor. It displays all information necessary for embroidery work.
②Function Keys
They are used to select the functions displayed on the screen.
③Start Button
It starts the embroidery work.
④Stop Button
It stops the embroidery work under execution.
⑤Number Keys
They are used to enter numbers upon parameter setting and to manually move the needle bar.
⑥Laser Pointer Key
It turns on or turns out the laser pointer in case where the laser pointer is equipped.
⑦ORG
This is used to return the frame to the origin.
⑧SET
This is used to confirm the selection in case of setting or on the menu.
⑨Main Shaft Speed Keys
They are used to adjust the main shaft speed in the middle of embroidery work. Use 'UP' to speed up. Use
‘DOWN’ to speed down.
1.1
Part Name and Function
The OP Box is an LCD-type monitor as shown in <Fig. 1.1-1>.
Cables and ports are located on the right, rear, and bottom sides.
1
Operation Box
[Fig. 1.1-1]
▶
Front
⑩
⑪
⑤
⑥
⑦
⑧
⑨
④③
②
①
11--22
The right side is protected by the connector cover against foreign materials including dust. Press the cover once to open.
①Keyboard Port
②VGA Port
③Serial Port
This is used for serial communications.
④LAN Port for Networking
⑤USB Port
It is used to save and call designs in and out of the embroidery machine by using a USB memory.
⑥USB Port (slave)
This is a reserve port for the USB-based communication with PC.
⑩Frame Move Keys
They are used to move the frame in the four directions including Up, Down, Left, and Right. They are also used to
move around the menu on the screen.
⑪Frame Speed Key
It is used to adjust the speed in three steps including high, medium, and low when moving the frame.
①Cable Connection for FDD
It is used to make connection to the external FDD using a cable.
②Cable Connection for Power Supply and Signal Transmission
[Fig. 1.1-2] [Fig. 1.1-3]
▶
Right
①
②
③
④
⑤
⑥
[Fig. 1.1-4]
▶
Rear
①
②
22--11
2
Basic Steps Before Starting Embroidery
2.1
Embroidery Machine Power-On
[Fig 2.1-1]
①Insert the power plug of the embroidery machine into the outlet
②Turn on the main power switch (‘ON’)
③Turn on the operation switch, and then the LCD screen of the OP Box is turned on and the operating program is
displayed on the screen.
④Use the frame move keys to check the appropriateness of the frame motion. Check the basic motions by referring
to ‘5.8.3 Motion Test’.
[ Warning ]
Make sure to pull off the power plug before A/S service activities begin.
Emergency Switch
Emergency Switch
Operation Switch
Main Power
Switch
※※SB, Multi-Head E-Series Embroidery Machine
22--22
[Fig 2.1-2]
①Insert the power plug into the outlet.
②Check the NFB switch location as in <Fig. 2.1-2> and lift the NFB switch (make it ‘ON’).
③Check the I/O switch location and press the I/O switch.
④The LCD screen is on, and the embroidery operation program is displayed on the screen.
⑤Use the frame move keys to check the normal operation of the frame. See ‘5.8.3 Operation Test’ to check the basic
operations.
[ Warning ]
Make sure to turn OFF the power or the NFB switch when repairing the machine.
I/O Switch
NFB Switch
※※DM Series Small-Head Embroidery Machine
22--33
[Fig 2.1-3]
①Insert the power plug of the embroidery machine into the outlet
②Turn on the main power switch (‘ON’)
③Turn on the operation switch, and then the LCD screen of the OP Box is turned on and the operating program is
displayed on the screen.
④Use the frame move keys to check the appropriateness of the frame motion. Check the basic motions by referring
to ‘5.8.3 Motion Test’.
[ Warning ]
Make sure to turn OFF the power or the NFB switch when repairing the machine.
Emergency
Switch
Emergency Switch
Operation Switch
Main Power
Switch
※※DM Series Multi-Head Embroidery Machine
[Fig 2.1-4]
①Insert the power plug of the embroidery machine into the outlet
②Turn on the main power switch (‘ON’)
③Turn on the operation switch, and then the LCD screen of the OP Box is turned on and the operating program is
displayed on the screen.
④Use the frame move keys to check the appropriateness of the frame motion. Check the basic motions by referring
to ‘5.8.3 Motion Test’.
[ Warning ]
Make sure to turn OFF the power or the NFB switch when repairing the machine.
Emergency
Switch
Emergency Switch
Operation Switch
Main Power
Switch
※※DM 56 Embroidery Machine
■SWF/DM-WD920-55
■SWF/DM-WU(2X)656-150
Autres manuels pour SB Series
1
Ce manuel convient aux modèles suivants
7
Table des matières
Autres manuels SWF Machine à coudre
SWF
SWF SB Flat Manuel utilisateur
SWF
SWF MAN-12 Manuel utilisateur
SWF
SWF MAS-12 Manuel utilisateur
SWF
SWF T1201 Guide de référence
SWF
SWF Dual Function E Series Manuel utilisateur
SWF
SWF Compact Series Manuel utilisateur
SWF
SWF E-Series Manuel utilisateur
SWF
SWF E-U901 Manuel utilisateur
SWF
SWF E-Series Manuel utilisateur
SWF
SWF MA-6 Manuel utilisateur
