Swagelok KCB Series Caractéristiques techniques

Kit Contents

KCB Series Regulators

Maintenance Instructions

Symbols

Tools Required

Lubricant

MS-LT-WL8

Piston sealSeat Retainer sealSeat retainer

Lightly lubricate

Discard

Tool Size Component

Vise

-Body

Socket

5/8 in. or 16 mm Seat retainer

11/16 in. or 17 mm Antitamper nut

Crow’s foot

1 1/4 in. or 32 mm Body cap

Open-ended wrench

1 1/4 in. or 32 mm Body cap

Torque wrench

Capable of

25 ft·lb (34 N·m, 3.5 m·kg)

Seat retainer,

Body cap

Exploded View

Seat Assembly

Handle

Seat retainer

Seat

Retainer seal

Stem

Range spring

Piston

Body cap

Stem nut

Spring stabilizer

Spring button

Piston seal

Body

WARNING

Before removing a regulator from the system for

service, you must

• depressurizesystem

• purgethesystemtoremoveanyresidual

system media left in the regulator.

Disassembly

1. Place the regulator in a vise.

2. Turn the handle counterclockwise until it stops.

Note: If using an antitamper nut, remove it from the body.

Then turn the stem counter clockwise until it stops.

3. Loosen the body cap.

4. Remove the cap assembly and handle as one piece and

set aside for later use.

Note: The range spring may fall from the cap assembly

when lifted. Set aside for later use.

5. Turn the body upside down. Remove the piston assembly

by tapping the body gently on a soft surface.

6. Remove and discard the piston seal from the piston.

7. Loosen and remove the seat assembly. Discard the seat,

seat retainer and retainer seal.

NOTICE

Be careful not to scratch the inside of the body.

Leakage could result.

Cap assembly

Range spring

Handle

Body cap

Piston assembly

Body

Piston seal

Piston

Body

Retainer seal

Seat retainer

Seat

Swagelok — TM Swagelok Company

October 2015, R1

MS-CRD-0134

For additional information, see www.swagelok.com.

Reassembly

NOTICE

Ensure all parts and tools are free of debris or

damage.

8. Insert the retainer seal into the seat retainer with the

groove facing away. Insert the seat into the seat retainer.

9. Invert the body and thread the seat assembly into the

body.

10. Tighten the seat assembly to 11.2 ft·lb (15.2 N·m,

1.6m·kg).

11. Place the piston seal onto the piston.

12. Place the piston assembly into the body until it seats

against the seat retainer.

NOTICE

Do not damage the piston seal. Leakage could

result.

13. Reinsert the range spring into the cap assembly with the

painted spring end visible if necessary.

14. Thread the cap assembly into the body and tighten the

body cap to 25 ft·lb (34 N·m, 3.5 m·kg).

15. Test the regulator for proper operation.

16. If using an antitamper nut, thread the antitamper nut onto

the stem after the set outlet pressure is reached. Tighten

the nut to 13.0 ft·lb (17.5 N·m, 1.8 m·kg).

Body cap

Seat

Seat retainer

Retainer seal

Groove

Seat assembly

Body

Piston assembly

Body

Range spring

Cap assembly

Piston seal

Piston

Threads only

Autres manuels Swagelok Contrôleurs

Swagelok

Swagelok KBP Series Caractéristiques techniques

Swagelok

Swagelok RHPS Series Manuel utilisateur

Swagelok

Swagelok RHPS Series Manuel utilisateur

Swagelok

Swagelok KHF Series Caractéristiques techniques

Swagelok

Swagelok RHPS Series Manuel utilisateur

Swagelok

Swagelok RDH10 Series Manuel utilisateur

Swagelok

Swagelok RHPS Series Manuel utilisateur

Swagelok

Swagelok BSH 10 Series Manuel utilisateur

Swagelok

Swagelok RHPS Series Manuel utilisateur

Swagelok

Swagelok RHPS Series Manuel utilisateur

Swagelok

Swagelok RA Series Manuel utilisateur

Swagelok

Swagelok RHPS Series Manuel utilisateur

Swagelok

Swagelok KPR Series Caractéristiques techniques

Swagelok

Swagelok KSV Series Caractéristiques techniques

Swagelok

Swagelok RHPS Series Manuel utilisateur

Swagelok

Swagelok BS20 Manuel utilisateur

Swagelok

Swagelok RHPS Series Manuel utilisateur

Swagelok

Swagelok RHPS Series Manuel utilisateur

Swagelok

Swagelok RHPS Series Manuel utilisateur

Swagelok

Swagelok KPP Series Caractéristiques techniques

Swagelok

Swagelok RS Series Manuel utilisateur

Swagelok

Swagelok BS2 series Manuel utilisateur

Swagelok

Swagelok LBS4 Manuel utilisateur

Swagelok

Swagelok PRS4 Manuel utilisateur

Manuels Contrôleurs populaires d'autres marques

Digiplex

Digiplex DGP-848 Mode d'emploi

YASKAWA

YASKAWA SGM series Manuel utilisateur

Sinope

Sinope Calypso RM3500ZB Manuel utilisateur

Isimet

Isimet DLA Series Style 2 Manuel d'installation

LSIS

LSIS sv-ip5a Manuel utilisateur

Rockwell Automation

Rockwell Automation 1769-L31 Manuel utilisateur

Airflow

Airflow Uno hab Manuel utilisateur

ABB

ABB ACS580-01 drives Manuel utilisateur

Panasonic

Panasonic GM1 Series Manuel utilisateur

Emerson

Emerson SW93 Manuel utilisateur

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuel utilisateur

Panasonic

Panasonic FP? Positioning Unit RTEX Manuel utilisateur

Samson

Samson Type 5824 Manuel de service

Alpha IP

Alpha IP MIOB 21001 Manuel utilisateur

Siemens

Siemens OpenAir GMA 1 Series Manuel utilisateur

Surecom

Surecom SR-629 Manuel utilisateur

Fishman

Fishman TriplePlay Manuel utilisateur

Regulus

Regulus SRS1 T Manuel utilisateur