SVT innovations SVT-2 Manuel utilisateur
User Manual
Please read this user manual prior to installing the system, and keep it well for future use.
SVT-2 7" Indoor Monitor A & B
1. Parts and Functions
Digital TFT LCD Screen
UNLOCK Button
TALK/MON Button
Microphone
Connection Port
Speaker
Mounting Hook
Mounting Hook
1 2 3
ON
DIPS
L1
L2
Emergency Button
Message Indicator
LCD screen Display the visitors' image
Emergency button Reserved function
Message indicator It will light when the monitor receives a call from the outdoor station
Unlock button Press to release the door
Talk/Mon button Press to communicate hand-free with visitor or press to
view the outdoor station's camera in standby mode
Microphone Sends out communication from user to guest
Mounting hook Use to hang up the monitor
Connection port Bus terminal
Speaker Sendsout communication from the guest to the user
Key functions
-1-
DIP Settings
1 2 3
ON
Bit
DIP1&2 Reserved. left to default.
Set to OFF. When the monitor is in the middle of the line in daisy chain connection.
Bit State Description
DIP3
1 2 3
ON
1 2 3
ON
Set to ON. When the montior is at the end of the line or connected to a SVT-DBC4.
2. Monitor Mounting
145~160 cm
1. Use the screws to fix the mounting bracket on the mounting box (Accesories
include a bracket, two pieces of 4X25 screws which are needed for fastening
the mounting bracket and a green connector.
2. Wire the system correctly, then hang the Monitor on the Mounting Bracket firmly.
3. Main Menu
Touch anywhere in the screen when in
standby mode to bring the screen to
the main menu.
-2-
4. Basic Door Release Operation
1. Press CALL button on outdoor station, the
indoor monitor rings, and at the same time,
the screen displays the visitors' image.
2. Press TALK/MON Button on monitor
or touch icon on screen, you can
communicate hand-free with the visitor for
90 seconds. After finishing communication,press TALK/MON button again or
touch icon to end the communication. If nobody answers the call the screen
will be turned off automatically after 30 seconds.
00:30 Front Door
It will display the
call source string
1. During talking state, Press UNLOCK Button or touch icon to open the door
for the visitor.(if two locks are connected to door camera,touch unlock 2nd
icon to release the second lock )
2. When the monitor is in standby mode, press TALK/MON button, The screen can
display the view of outside. Or touch Monitor icon on main menu to get into the
door camera switching mode, if multi outdoor stations are installed, you can press the
door 1/2/3/4 to monitor the door station or CCTV camera you want. Press
icon to exit and enter into the main menu screen.
Note: if the system is connected to a SVT-2 AC31 camera throught a SVT-2 SCU ,
press the camera 1/2/3/4 to monitor the camera you would like. Press icon to
exit and go back to the main menu screen.
5. Intercom Function
1. Inner Broadcast: If multi slave indoor monitors are installed in the same system,
(either single family or apartment system), select Inner Broadcast, and all indoor
monitors will automatically receive broadcast content at the same time.
2. Inner Call: If multi slave indoor monitors are installed in the same system (either
single family or apartment system), select Inner Call, and all the other indoor monitor
-3-
3.
4.
Touch Intercom icon on main menu to get into the intercom mode, then select one of
the following: Inner Broadcast, Inner Call, Name List Call and Call Guard Unit.
will ring at the same time.Whichever indoor monitor answers the call, the
communication starts and the other indoor monitors stop ringing automatically
(Refer to Slave Indoor Monitor on page 11.
3. Name List Call: Indoor monitors can call other indoor monitors in the system.
Touch Name List Call icon (the namelist will be created automatically by the
system) on intercom mode menu page, Select a name on the screen then touch
icon to call.Press / icon to enter last/next name list page. (Touch Dial
Number icon again to redial)
4.
5.
6.
7.
8.
9. Call Guard Unit: A indoor monitor can be assigned as Guard Unit Monitor; when the
Guard Unit Monitor answers the call, conversation with the guard person is started..
6. Video/Picture Memory
-4-
[ 01 ] Jim. Zhang
[ 02 ] Calo. Liu
[ 03 ] Jacko. Zhang
[ 04 ] Philips. Chen
[ 05 ] Hebe. Zhang
[ 06 ] Tony. Li
Name List
4.
Video/Picture Playback
Touch Playback icon on main menu, the recorded videos/pictures will be played on
screen, please note that touch icon to Start/Pause the videos recorded.
Video/Picture Recording
Both Auto-Recording and Manual-Recording are available. Auto-Recording is
default. When the system receives a call, after 3s, the indoor monitor will record
one video/picture for each call automatically.You may also touch icon to
record the visitor's video/image .
-5-
Image:008/020 2014/06/23 14:36:55
7. Call Record Function
Call Record: All calls including Outdoor station-to-monitor call, indoor monitor-to-
indoor monitor call, will be recorded and can be reviewed afterwards.
Touch Call Record icon on main menu to get into the call record mode.When there
are unread call records, arrow color red. Press the unread call record, and then touch
icon to play it.
Note: When the system without SD card: 1.118 pictures in inner memory
2.Manage each picture.
When the system with SD card:1.Up to 32G Micro SD card
2.Video & Audio record
3.Manage each video clips
4.Can be copied
Call Record 01/05
06-23 15:22 Calo.Liu
06-18 20:54 Smith
06-12 11:06 Vincent.Yang
05-29 08:39 Allen.Chen
05-27 21:43 Hebe.Zhang
04-20 13:16 Ben.Wu
Call Record 01/05
06-23 15:22 Calo.Liu
06-18 20:54 Smith
06-12 11:06 Vincent.Yang
05-29 08:39 Allen.Chen
05-27 21:43 Hebe.Zhang
04-20 13:16 Ben.Wu
Note: 1.Limited number of records.
2.Do not need to delete any a
record.
-6-
8. Do Not Disturb Function
Touch Do Not Disturb icon on main menu to get into the Do Not disturb mode, then
select of the the following: Normal, In 1 Hour, In 8 Hours and Always. You can select
the appropriate item according to your needs.
Do Not Disturb
Normal
In 1 Hour
In 8 Hours
Always
Note: When you select "In 1 Hour" or "In 8 Hours", the remaining time will be
displayed on the bottom of the screen.
Refuse Call In: 00:58:32
9. Transfer Function
Touch Transfer icon on main menu to get into the transfer mode. Touch the
empty place ,and then input the telephone number by pressing the digital keypad.And it
has 3 types of divert modes:
1:Don't Transfer ---- calls from outdoor station will not be diverted.
2:If No Answer ---- outdoor station calls indoor monitor firstly, the the call is not
answered within 30seconds, it will be diverted tothe telephone number
programmed. The indoor monitor will turn off immediately when SVT-2 TPS
divertssucessfully. Note, this action will not affect the communication between
SVT-2 TPS and outdoor station.
3:Simutaneously ---- calls from outdoor station will be diverted to your telephone
simutaneously. The indoor monitor will not turn off when SVT-2 TPS diverts
sucessfully, however if one answers the call at the indoor monitor, the SVT-2 TPS
will hang up automatically.
Transfer Options
Don't Transfer
If No Answer
Simutaneously
1)
2)
3)
-7-
Note:1.Touch icon to detect the transfer device info.
10. Staircase Light
Function is reserved. Not available for SVT-2 system.
11. Basic Setup Instructions
Sounds Settings
Touch icon on main menu screen (or on door camera switching mode screen), then
select "Sounds" item to enter the sounds settings page.You can set a variety of ring
tones on this page. Touch icon to exit the setting and return main menu screen.
Transfer Options
Don't Transfer
If No Answer
Simutaneously
1)
2)
3)
Note: Door Ring have 2 modes:
United and Seperated. If select "United",
it means Door1/2/3/4 will be adjust with
the same ring tone.
-8-
Date & Time Settings
Touch icon on main menu screen (or on door camera switching mode screen), then
select "Date & Time"item to enter the date & time settings screen.You can set
the date & time on this page. Touch icon to exit the setting and return main menu
screen.
Note: You can set your own time, you
can also synchronize the system time.
Rename & Monitor Time Settings
Touch icon on main menu screen (or on door camera switching mode screen), then
select "More..."item to enter the Rename & monitor time settings page.You can
set door station rename, camera rename, monitor time on this page. Touch icon to
exit the setting and return main menu screen.
-9-
Note: If you want to rename, please touch the place of name, then it will turn keypad
page ,you can input your new name in this screen
DOOR3 RENAME abc
DS-3_
Screen and Volume Adjustment
During monitoring or talking state, touch icon, and the adjust screen will be
displayed.
1. The Scene mode selection: Total 4 screen
modes can be selected in sequence:
Normal,
Brightly, Soft
and
User.
Whenever you modify
Brightness
or
colour, Scene
item will be set to
User
mode automatically.
2. Note that all the modications will be performed immediately after the operation.
Touch the window of image to exit the adjust page.
Autres manuels pour SVT-2
1
Table des matières
Autres manuels SVT innovations Système d'interphone
SVT innovations
SVT innovations SVT-MF2 Manuel utilisateur
SVT innovations
SVT innovations SVT-2 Series Manuel utilisateur
SVT innovations
SVT innovations SVT-MF4 Manuel utilisateur
SVT innovations
SVT innovations SVT-2 Manuel utilisateur
SVT innovations
SVT innovations SVT-4 Outdoor Station C Manuel utilisateur
SVT innovations
SVT innovations SVT-IP A Manuel utilisateur
SVT innovations
SVT innovations SVT-SMART 500 Manuel utilisateur
