Sven SPS-710 Manuel utilisateur

www.sven.

2.0 Multimedia Speaker

System with Bluetooth

SPS-710

OPERATION

MANUAL

2.0 Multimedia Speaker

System with Bluetooth

ENG

Congratulations on your purchase of the Sven speaker system!

TRADEMARKS

All trademarks are the property of their legal holders.

NOTICE OF RESPONSIBILITY RESTRICTION

Despite the exerted eorts to make this Manual more exact, some discrepancies may occur. The

information in this Manual is given on “as is” terms. The author and the publisher do not bear any

liability to a person or an organization for loss or damage which has arisen from the information

contained in this Manual.

CONTENTS

1. BUYER RECOMMENDATIONS ..................................................................... 2

2. PACKAGE CONTENTS............................................................................... 3

3. SAFETY PRECAUTIONS ............................................................................ 3

4. TECHNICAL DESCRIPTION ........................................................................ 3

5. PREPARATION AND OPERATION ................................................................. 5

6. TROUBLESHOOTING................................................................................ 9

7. TECHNICAL SPECIFICATIONS ..................................................................... 9

1. BUYER RECOMMENDATIONS

• Unpack the device carefully. Make sure there are no accessories left in the box. Check up the device

for damage; if the product was damaged during transportation, address the rm which carried out

the delivery; if the product functions incorrectly, address the dealer at once.

• Check up the package contents and availability of the warranty card. Make sure the warranty card

has a shop stamp, a legible signature or the seller’s stamp and purchase date, and the goods number

corresponds to that in the warranty card. Remember: in case of warranty card loss or discrepancy of

numbers you forfeit the right for warranty repairs.

•Do not switch on the speaker system immediately after you bring it into a room from environment

with negative temperature! After unpacking, the speaker system should be kept in conditions of

room temperature for at least 4 hours.

• Before installing and using the speaker system, read this Manual carefully and keep it for future

reference.

• Shipping and transportation equipment is permitted only in the original container.

• Does not require special conditions for realization.

• Dispose of in accordance with regulations for the disposal of household and computer equipment.

Technical support is on www.sven..

ENG

Operation Manual SPS-710

2. PACKAGE CONTENTS

• Speakers – 2 pcs

• 2RCA to mini-jack signal cable – 1 pc

• Аudio cable – 1 pc

• Remote control – 1 pc

• AAA type batteries – 2 pcs

• Antenna wire – 1 pc

• Operation manual – 1 pc

• Warranty card – 1 pc

3. SAFETY PRECAUTIONS

Caution! High voltage inside! To avoid the risk of electric shock

do not open or touch elements inside.

• To avoid electric shock, do not open the MSS and do not perform repairs by yourself. Service and

repairs should be performed only by qualied specialists in an authorized service center. The list of

authorized service centers is available on www.sven.fi.

• Do not allow the circuit of wires (including the grounded ones) between the speakers, on the power

amplier or the ground, for it causes damage to the power amplier output stage.

• Do not touch the MSS power cord plug pins for 2 seconds after unplugging it from the mains.

• Do not put foreign objects inside the holes of the MSS.

• Protect the MSS from high humidity, water and dust.

• Protect the MSS from heating: do not place it closer than 1 m from a heat source. Do not expose

it to direct sunlight.

• Do not place any open ame sources on or close to MSS.

• Do not place the MSS in poorly ventilated areas. Leave an air gap of 10 cm or more. When operating

the MSS, do not put any devices on it, do not cover it with cloth or other objects preventing it from

cooling.

• Do not use any chemical agents for cleaning. Clean it with dry soft cloth only.

4. TECHNICAL DESCRIPTION

SPS-710 Multimedia Speaker System (MSS) with Bluetooth is designed to play music, sound

games, movies, etc. The MSS has a built-in power amplier allowing to connect it to virtually any

audio source. MSS has a built-in Bluetooth wireless signal transmission protocol, FM radio and audio

player. Remote control (RC) is included.

Special features

• Bluetooth wireless signal transmission protocol

• Built-in clock and built-in alarm

• LED display

• USB ash port and SD card slot

• Built-in FM radio

•Headphone jack

•Remote control

• MDF speaker cabinets

2.0 Multimedia Speaker

System with Bluetooth

ENG

Active speaker panels

aVOL: volume level control knob

bTREBLE: treble control knob

cBASS: bass control knob

dSD card slot*

eM: standby power button (pressed long);

switch mode button: AUX/FM/BT/ Player/Сlock/Alarm

(pressed short)

f: Previous track (in Player and Bluetooth mode);

Previous station (in Radio mode);

Clock/Alarm settings

g: Play/Pause button (in Player and Bluetooth mode);

Start/Stop auto scan (pressed long in Radio mode);

Mute (pressed short in AUX/FM-mode);

Clock/Alarm settings (pressed long in clock / alarm mode)

h USB: slot for a USB flash device* containing МР3, WAV

audio files

i: Next track (in Player and Bluetooth mode);

Next station (in Radio mode);

Clock/Alarm settings

jHeadphone jack

kAUDIO OUTPUT: passive speaker input jack

l POWER ON/OFF: power switch

mPower cord

nAUDIO INPUT (L/R): line input jack 2 x RCA

o AUDIO INPUT (FM ANT): radio antenna input jack

* The storage device must be formatted as FAT, FAT32.

Memory cards SDHC class 10 or less can be

used. Connection of external hard disks other than USB ash

drive is not recommended, otherwise it can

cause the MSS damage.

Remote control (Fig.3)

a STBY: ON/OFF power switch button (ST-BY Mode)

bMUTE: mute mode;

display brightness adjustment (ST-BY mode)

cDEL/REP: deleting a memorized station (pressed long in

Radio mode)

change player mode (Player mode)

dTIME: current time display

eAUX: AUX mode

fLOUD/SAVE: memorize selected frequency (pressed short

in Radio mode);

loudness mode on/o button (pressed long)

gUSB/SD: source input USB or SD (Player mode)

Fig. 1. Control panel

Fig. 2. Active speaker

rear panel

OFF

~230V / 50Hz

ANT

AUDI O IN PUT

AUDI O O

UTPUT

ENG

Operation Manual SPS-710

hSLEEP: Sleep mode

i FM/BT: FM/Bluetooth mode

jTR +/-: treble control button

kBASS +/-: bass control button

lVOL +/-: volume control button

m, : previous track/next track (Player and Bluetooth

mode);

previous/next station (Radio mode); clock/alarm settings

n, AUTO: Play / Pause (Player and Bluetooth mode);

Start/Stop auto scan (pressed long in Radio mode);

clock/alarm settings

o0-9: numeric pad (select track number in the Player

mode or track number FM Radio)

Notes:

• Use the remote control at an angle no more than

30 degrees, no more than 7 meters away from the IR

receiver.

• Direct the RC at the IR receiver display on the

control panel.

• If the RC isn’t working, check batteries and replace

the discharged batteries with new ones.

• Remove the batteries from the remote control if

the device is left unused for a long period of time

(more than a week).

5. PREPARATION AND OPERATION

Speaker placement

• Place the speakers symmetrically to the listener at least

one meter away.

• Place the speaker system far away from supersensitive

monitors and TV sets, as insignicant image distortion in

these devices is possible.

MSS сonnecting and control

SPS-710 Multimedia Speaker System can be connected

to virtually any audio source: laptop/

mobile device

Fig. 3. Remote control

PC sound card, etc. (see connection diagram in Fig. 4).

• Before making any connections, make sure that the MSS is unplugged. Connect the active speaker

with the passive one using the audio cable (included). To do this, wring out the connector terminals

on a passive speaker, insert the red cable wires of speakers to the red terminals and the black cable

wires of speakers – to the black terminals (see connection diagram in Fig. 4), and then connect

cables to the active speaker terminals k.

Note. Check the reliable xation of wires in terminals, connection compliance with polarity

and the absence of contact of bared wires with each other and the metal parts of the

hardware.

• To connect the MSS to a PC, MP3 player, rst plug the RCA jacks of the 2RCA to mini-jack Ø 3,5 mm

signal cable (included) to the РС audio AUX input of the active speaker, then plug the mini-jack of the

2.0 Multimedia Speaker

System with Bluetooth

ENG

signal cable to the the computer sound card LINE OUT port or to the

mobile device

audio OUTPUT

(see connection diagram in Fig. 4).

Note. Sound quality is directly affected by correctness and reliability of the connection of

cables. It is recommended that cables included in the package contents of the MSS be used.

• Insert the power cord plug into the mains outlet.

• Turn on the MSS power using the ON/OFF switch (l, ON) on the active speaker rear panel. Then,

turn on the audio source.

• Turn on the speaker by turning any knob on the control panel of the active speaker or use button

aon the remote control.

• Select a desired signal source pressing short M ebutton on the control panel or press e, g, i

buttons on the remote control, display will show the selected input.

• Adjust the volume level with VOL +/- knob on the control panel or with the VOL+/- lbuttons on

the remote control.

• Adjust the bass and treble level using the TREBLE +/- band BASS +/- cknobs on the control

panel or buttons TR+/- j, BASS +/- k on the remote control (Fig. 3).

• To listen to the radio, connect the antenna to the FM ANT o jack (see Fig. 4) and adjust it for better

reception.

• After completing the MSS operation, mind to switch it o using the ON/OFF switch (l, OFF position),

and unplug the power cord from the socket.

Bluetooth mode

• For the signal transmission in this mode it is necessary rst to interconnect the MSS with a signal

source. For this press and hold the button ion the remote control or button e on the control panel,

the display will show the selected input. The MSS will go to the search mode. Then on the signal

source (telephone, smartphone, etc.) choose the search mode of devices with Bluetooth. The name

OFF

~230V / 50H z

ANT

AUDI O IN PUT

AUDI O OUTPUT

Mobile device

Audio cable

Power cord

FM-antenna

Signal cable

Fig. 4. Audio sources connection diagram

ENG

Operation Manual SPS-710

of the MSS «SVEN SPS-710», will be displayed on the signal source screen, with which you need to

intercommunicate*. Select this device and the “connect” command.

•It is possible to control the player of a signal source from the remote control using button mor

using buttons f, ion the control panel

AUX Mode

• To turn on AUX mode press the M ebutton on the control pa nel or button AUX e on the RC, the

display will show the selected input.

Player Mode

• The system will automatically enter the Player mode when a USB device (USB-ash or micro

SD-card**) is connected to the appropriate connectors, or press the M ebutton on the control

panel or the g button on the remote control, the display will show the selected mode. The les will

automatically start playing.

• You can select the player mode using the remote control DEL/REP cbutton (“ONE” – the playing

track replay; “RND” – play random tracks; “ALL” – play all tracks available), the display will show the

selected mode.

* The MSS operation may be incorrect if an SD card of 512 Mb capacity or lower is used. If a USB ash

device of 8 Gb capacity or more is used, command processing time may be extended.

** If the MSS has been already listed in the device list of the signal source, then the second activation

of the search mode is not required. Select only this device and the “connect” command. You might

have to enter “0000” code to connect some models of devices via Bluetooth.

ST-BY Mode

• To enter/exit this mode, press and hold down M button on the control panel or abutton on the

remote control.

Mute Mode

• Press the MUTE bbutton on the remote control to select the MUTE mode. Press this button again

to leave the MUTE mode.

Radio Mode

• Use button eon the control panel or button ion the remote control to enter the Radio mode. The

display will show the selected input.

•Press long button gon the control panel or AUTO non the remote control. To stop the auto

scanning process press twice this button before the scanning is over. The frequency being scanned

is displayed on the front panel and when the station is being memorized its assigned sequence

number is displayed for a short moment.

• To save the selected station, press the SAVE fbutton on the remote control then select the

desired memory with the buttons , on the control panel or on the remote control, and press the

SAVE fbutton again.

• If preset radio stations are available in the memory, you can switch from one to another by short

pressing buttons , on the control panel or , on the remote control. You can also enter the

frequency or the number of the preset station using numeric pad buttons oon the remote control.

2.0 Multimedia Speaker

System with Bluetooth

ENG

Clock Mode

• When the MSS is in the ST-BY mode, the display shows the current time. When the system is in

another mode, use the TIME button on the remote control to see the time. The current time will be

displayed for 3-5 seconds.

•To set the current time from the remote control:

Switch to «ST-BY» mode. Enter the time setting mode by long pressing the TIME button (the

corresponding digit will blink on the display). Set the required hour with the buttons , . Switching

between the hour / minute settings and exit from the setting mode is performed by pressing the

AUTO button.

•To set the current time from the control panel:

Turn on MMS, to press M button several times switch to the clock mode. Long press button (the

corresponding digit will ash on the display). Set the required hours with the buttons , . Switching

between setting hours / minutes and exiting setup mode is done by pressing a button .

Alarm Mode

• To set the alarm with the remote control:

Switch to ST-BY mode. Spend setting hours, after the process of setting the alarm. The alarm time

will ash on the display. Set the desired value of the clock buttons , , after press the button ,

then set the required minutes using the buttons , , next press button , then turn on / o the

alarm with the buttons , . Exit setup mode with the button .

•To set the alarm from the control panel:

Turn on the speakers, switch to the alarm mode by pressing several times M button. Press long

button (the corresponding digit will ash on the display). Set the required hours with the buttons

, , then press button , then set the required minutes using buttons , , after that press button

, then turn on / o the alarm with the buttons , . Exit setup mode by pressing button .

When the alarm is on, a white LED lights up to the right of the display.

SLEEP Mode

• The SLEEP mode enables to switch over the device in the ST-BY mode after a lapse of time chosen

by a user. Press the SLEEP button on the control panel to enter the SLEEP mode.

ENG

Operation Manual SPS-710

7. TECHNICAL SPECIFICATIONS

Parameter, measurement unit Value

Output power (RMS), W 40 (2 × 20)

Frequency range, Hz 40-22,000

Speaker diameter (tweeter + woofer), mm Ø 25 + Ø 100

Bluetooth operating range, m till 10

Power supply, V/Hz ~230/50

Dimensions (one speaker) (W × H × D), mm 170 × 274 × 195

Weight, kg 5.4

Notes:

• Technical specications given in this table are supplemental information and cannot give

occasion to claims.

• Technical specications and package contents are subject to change without notice due

to the improvement of SVEN production.

6. TROUBLESHOOTING

Problem Cause Solution

The MSS does not

turn on.

The MSS isn’t connected to a

mains outlet. Check the connection.

The power switch is off. Turn on the switch.

No sound or the

sound is too quiet.

Volume level is set at minimum

value. Adjust the volume level.

No connection via Bluetooth /

wrong connection or selection of

an audio signal source.

Fulll the interconnection

procedure via Bluetooth /

connect or select an audio signal

source correctly.

Distortion of sound. Large amplitude of the input

signal.

Turn down the source volume

and the MSS volume.

The remote control

is not working. The batteries are discharged. Replace the batteries with new

ones.

If none of the above methods can solve the problem, please seek professional advice at your

nearest service center. Never attempt to repair the product yourself.

2.0 Multimedia Speaker

System with Bluetooth

SPS-710

Model: SPS-710

Импортер в России: OOO «РЕГАРД», 105082, РФ,

г. Москва, ул. Фридриха Энгельса, д.75, стр. 5.

Уполномоченная организация в России: ООО «РТ-Ф»,

105082, г. Москва, ул. Фридриха Энгельса, д. 75, стр. 5.

Условия гарантийного обслуживания смотрите в га-

рантийном талоне или на сайте www.sven..

Гарантийный срок: 12 мес.

Срок службы: 5 лет.

Производитель: «СВЕН ПТЕ. Лимитед», 176 Джу Чиат

Роуд, № 02-02, Сингапур, 427447. Произведено под

контролем «Свен Скандинавия Лимитед», 48310, Фин-

ляндия, Котка, Котолахдентие, 15. Сделано в Китае.

Manufacturer: SVEN PTE. LTD, 176 Joo Chiat Road, № 02-

02, Singapore, 427447. Produced under the control of Oy

Sven Scandinavia Ltd. 15, Kotolahdentie, Kotka, Finland,

48310. Made in China.

® Registered Trademark of Oy SVEN

Scandinavia Ltd. Finland.

Table des matières

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur