Sven MS-1090 Manuel utilisateur

www.sven.ﬁ

OPERATION

MANUAL

2.1 Multimedia Speaker System

MS-1090

Congratulations on your purchase of the Sven speaker system!

TRADEMARKS

All trademarks are the property of their legal holders.

NOTICE OF RESPONSIBILITY RESTRICTION

Despite the exerted eﬀorts to make this Manual more exact, some discrepancies may occur. The

information in this Manual is given on “as is” terms. The author and the publisher do not bear any

liability to a person or an organization for loss or damage which has arisen from the information

contained in this Manual.

CONTENTS

1. BUYER RECOMMENDATIONS ..................................................

.............

2. PACKAGE CONTENTS.............................................................

............

3. SAFETY PRECAUTIONS ..................................................

...................

4. TECHNICAL DESCRIPTION ....................................................

................

5. PREPARATION AND OPERATION ..........................................

......................

6. TROUBLESHOOTING.................................

...............................................

7. TECHNICAL SPECIFICATIONS ....................................................

...........

1. BUYER RECOMMENDATIONS

•Unpack the device carefully. Make sure there are no accessories left in the box. Check up the

device for damage; if the product was damaged during transportation, address the ﬁrm which

carried out the delivery; if the product functions incorrectly, address the dealer at once.

•Check up the package contents and availability of the warranty card. Make sure the warranty

card has a shop stamp, a legible signature or the seller’s stamp and purchase date, and the goods

number corresponds to that in the warranty card.

• Do not switch on the speaker system immediately after you bring it into a room from environment

with negative temperature! After unpacking, the speaker system should be kept in conditions of

room temperature for at least 4 hours.

•Before installing and using the speaker system, read this Manual carefully and keep it for future

reference.

Technical support is on www.sven.ﬁ.

ENG

Operation Manual MS-1090

2. PACKAGE CONTENTS

• Subwoofer — 1 pc

• Satellites — 2 pcs

• 2RCA to mini-jack (Ø 3.5 mm) signal cable — 1 pc

• Remote control — 1 pc

• CR2025 type battery installed into the remote control — 1 pc

• Operation manual — 1 pc

• Warranty card — 1 pc

3. SAFETY PRECAUTIONS

•To avoid electric shock, do not open the MSS and do not perform repairs by yourself. Service and

repairs should be performed only by qualiﬁed specialists in an authorized service center. The list of

authorized service centers is available on www.sven.ﬁ

•Do not allow the circuit of wires (including the grounded ones) between the speakers, on the

power ampliﬁer or the ground, for it causes damage to the power ampliﬁer output stage.

•Do not touch the MSS power cord plug pins for 2 seconds after unplugging it from the mains.

•Disconnect MSS from the mains system during a fuse replacement. Use fuses of the same type

and rated value. Do not use hand-made fuses.

•Do not put foreign objects inside the holes of the MSS.

•Protect the MSS from high humidity, water and dust.

•Protect the MSS from heating: do not place it closer than 1 m from a heat source. Do not expose

it to direct sunlight.

•Do not place any open ﬂame sources on or close to MSS.

•Do not place the MSS in poorly ventilated areas. Leave an air gap of 10 cm or more. When

operating the MSS, do not put any devices on it, do not cover it with cloth or other objects pre-

venting it from cooling.

•Do not use any chemical agents for cleaning. Clean it with dry soft cloth only.

4. TECHNICAL DESCRIPTION

MS-1090 2.1 Multimedia Speaker System (MSS) is designed to play music and sound games,

movies, etc. The MSS has a built-in power ampliﬁer, allowing to connect it to virtually any audio

source (CD/DVD-player, TV, PC, etc.) without using an additional power ampliﬁer. Remote control

is included.

Special features

•Speaker system is compatible with PCs, DVD/Media-players, mobile devices and other sound

sources

•Two-way satellites

•Built-in player for audio ﬁles from portable storage devices

•USB ﬂash port and SD card slot

•Separate subwoofer volume control

•Mute mode

•Remote control

Caution! High voltage inside! To avoid the risk of electric

shock do not open or touch elements inside.

ENG

2.1 Multimedia Speaker System

Fig. 2. Rear panel

•Magnetic shielding

•MDF cabinets of the subwoofer and satellites

Subwoofer panels

a: Play/Pause (Player mode)

bVOL+/ : next track (pressed short); volume up (held down more than 1 sec.)

cVOL-/ : previous track (pressed short); volume down (held down more than 1 sec.)

dMODE: AUDIO INPUT or USB/SD source selection

eUSB/SD: selection between USB ﬂash and SD card

fEQ: equalizer mode selection (playing MP3 ﬁles from a USB ﬂash drive or an SD card only)

gLED indicator

hREPEAT: repeat the current track (pressed once); repeat all tracks (pressed twice)

i: IR receiver window

jBASS +/-: subwoofer volume control knob

kAUDIO INPUT L/R: audio source input jack

lAUDIO OUTPUT L/R: satellite output jack

mPOWER ON/OF: power switch

nPower cord

oSD CARD: slot for connecting an SD card containing МР3 audio ﬁles

pUSB: USB port for connecting a USB ﬂash drive containing МР3 audio ﬁles

REPEAT

USB/SD

MODE

VOL+

VOL-

Fig. 1. Front panel

Fig. 3. Side panel

ENG

Operation Manual MS-1090

123

456

789

MODE

USB/SD

FOLDER

UP FOLDER

DOWN

Remote control

aFOLDER DOWN: move to next folder

bFOLDER UP: move to previous folder

c: next track (in the Player mode)

d: previous track (in the Player mode)

e-/+: volume control buttons

f0-9: numeric buttons for entering a track number

gMUTE: MUTE button

h: play/pause (in the Player mode)

iEQ: equalizer mode selection button (in the МР3 player mode

only)

jMODE: AUDIO INPUT or USB/SD source selection

kUSB/SD: selection between USB ﬂash and SD card

Notes:

• Before operating the remote control, extract the bat-

tery, remove the ﬁlm protecting the battery from dis-

charge during transportation, and insert the battery back

into the remote control.

• Use the remote control at an angle no more than 30 deg-

rees, no more than 7 meters away from the IR receiver.

• Direct the remote control at the IR receiver display on the subwoofer.

• If the remote control is not working, check the battery and replace the discharged bat-

tery with a new one.

• Remove the battery from the remote control if the device is left unused for a long period

of time (more than a week).

5. PREPARATION AND OPERATION

Speaker placement

•Place the speakers symmetrically to the listener at least one meter away. The subwoofer emits

non-directional sound, therefore it can be located in any place of the room where it sounds the best.

•Place MSS far away from monitors and TV sets, as insigniﬁcant image distortion in these super-

sensitive devices is possible.

Installation and operation

MS-1090 Multimedia Speaker System can be connected to virtually any audio source: DVD/CD/

MP3, TV, PC sound card, etc. (see Fig. 5).

• Before making any connections, make sure the MSS is oﬀand unplugged. Then connect the sub-

woofer AUDIO OUTPUT jack lto the satellites with the built-in audio cables (see connection diagram

in Fig. 5).

• To connect the MSS to an audio source, use the included 2RCA to the mini-jack stereo signal

cable. Insert the RCA jacks of the cable into the AUDIO INPUT jack k, and the mini-jack of the

cable – into the Ø 3.5 mm jack of the audio source.

Fig. 4. Remote control

ENG

2.1 Multimedia Speaker System

USB/SD card

connection

• To connect the MSS to a DVD player or TV, use a 2RCA to 2RCA stereo signal cable (not included).

Insert the RCA jacks of the cable into the AUDIO INPUT jack k, and connect the other RCA jacks to

the audio output jack of your DVD/CD player.

Note. The sound is directly dependent on accuracy and reliability of the cable connections.

It’s recommended that you use the cables supplied with the speakers.

• Insert the power cord plug n(see Fig. 2)

on the subwoofer rear panel into the mains outlet

• Set the subwoofer volume to the minimum by turning the BASS +/- knob jon the subwoofer rear

panel counterclockwise until it stops.

• Switch on the device using the POWER switch (m, ON position) on the subwoofer rear panel.

• Select an audio source (AUDIO INPUT or USB/SD) with the MODE button don the subwoofer front

panel or the MODE button jon the remote control.

• Adjust the volume level by turning the BASS +/- knob jon the subwoofer rear panel, and then –

using buttons VOL+ bor VOL- con the subwoofer front panel or buttons -/+ eon the remote

control (Fig. 4).

• The MUTE function is designed for switching on/oﬀthe sound of the MSS. To switch the sound

on, press the MUTE button g(Fig. 4) on the remote control again.

Player mode

• To switch to the Player mode, insert a USB or SD storage device into the corresponding port

(USB por SD CARD o) (Fig. 3) when the MSS is on. Then press the MODE button don the front

panel or the MODE button jon the remote control. The playback will start automatically. The LED

gon the front panel will blink green.

• To select the AUDIO INPUT, press the MODE button jon the remote control or the MODE button

don the front panel. The LED gwill light up red.

Fig. 5. Connection diagram

2RCA to mini-jack

signal cable

Player

2RCA to 2RCA

signal cable

DVD

ENG

Operation Manual MS-1090

• To select a track, use the remote control numeric pad fto enter its number, or press buttons d

and con the remote control or buttons band con the front panel.

• Using the REPEAT button hon the front panel, you can repeat the current track or all tracks (if

the button is pressed once or twice respectively).

• In the Player mode, Equalizer feature is available. To select a preset mode, use the EQ button i

on the remote control or the EQ button fon the front panel.

Notes:

• If the MSS is left unused for a long period of time, please mind to switch it off by shifting

the POWER switch mon the rear panel into the Off position and unplug the power cord.

• To improve the sound quality, use the Line Out port of your sound card.

• Due to the constant development of the software, the actual MSS operation may differ

from that described in this manual. The most recent version of the manual is available at

www.sven.ﬁ.

If none of the above methods can solve the problem, please seek professional advice at your nearest

service center. Never attempt to repair the product yourself.

Problem

The MSS does not

turn on.

No sound or the

sound is too quiet.

Distortion of sound.

The remote control

is not working.

Cause

The MSS isn’t connected to a mains

outlet.

The power switch is oﬀ.

Volume level is set at minimum value.

Improperly connected audio source.

Large amplitude of the input signal.

The battery is discharged.

Solution

Check the connection.

Turn on the switch.

Adjust the volume control knob.

Connect the audio sources correctly.

Turn down the source volume and

the MSS volume.

Replace the battery with a new one.

6. TROUBLESHOOTING

ENG

2.1 Multimedia Speaker System

Parameter, measurement unit

Output power (RMS), W

subwoofer

satellites

Frequency response, Hz

subwoofer

satellites

Speaker diameter, mm

subwoofer

satellites

Power supply, V/Hz

Dimensions (one speaker), mm

subwoofer

satellites

Weight, kg

7. TECHNICAL SPECIFICATIONS

Notes:

• Technical speciﬁcations given in this table are supplemental information and cannot give

occasion to claims.

• Technical speciﬁcations and package contents are subject to change without notice due to

the improvement of SVEN production.

Value

40 (18 + 2 × 11)

2 × 11

50 – 180

180 – 20,000

Ø 115

Ø 25 + Ø 76

~220/50

140 × 298 × 283

93 × 183 × 136

4.3

ENG

Operation Manual MS-1090

2.0 Multimedia Speaker System

Automatic Voltage Regulator

Стабилизатор напряженияСтабилизатор напряжения

Automatic Voltage Regulator

2.0 Multimedia Speaker System2.0 Multimedia Speaker System

SPS-619

MS-1090

2.1 Multimedia Speaker System

Модель: MS-1090

Импортер вРоссии: ООО «СКАНДИТРЕЛ»,

111024, РФ, г. Москва, ул. Авиамоторная, д. 65, стр. 1.

Уполномоченная организация вРоссии: ООО «РТ-Ф»,

105082, г. Москва, ул. Фридриха Энгельса, д. 75, стр. 5.

Условия гарантийного обслуживания смотрите

вгарантийном талоне или на сайте www.sven.ﬁ.

Гарантийный срок: 12 мес.

Срок службы: 5 лет.

Производитель: «СВЕН ПТЕ. Лимитед», 176

Джу Чиат Роуд, №02-02, Сингапур, 427447.

Произведено под контролем «Свен Скандинавия

Лимитед», 48310, Финляндия, Котка, Котолахдентие, 15.

Сделано вКитае.

Manufacturer: SVEN PTE. LTD, 176 Joo Chiat Road,

№02-02, Singapore, 427447. Produced under the

control of Oy Sven Scandinavia Ltd. 15, Kotolahdentie,

Kotka, Finland, 48310. Made in China.

® Registered Trademark of Oy SVEN

Scandinavia Ltd. Finland.

Table des matières

Autres manuels Sven Intervenants

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur