NK-GP1500 User’s Manual 5
Shenzhen Huangjintai Electronic Co.Ltd 11/16/2012
※ Operation Instruction
The installer should have knowledge and
experience in stalling electrical equipment
■ Installation Steps
1、 Check and confirm all accessories are included.
2、 Place this equipment at flat and stable platform in a dry &
well-ventilated area. Make sure there is no any obstacle near
the air vents within 50CM.
3、 Select 100AH or above maintenance-free lead-acid battery,
whose rated power is 12V.
4、 Connect the battery and inverter with 16mm2 (or above) cable.
The red cable to positive, and black one to negative. Ensure
the battery connection is solid,.
5、 Plug AC cable's terminal into this product’s AC input port.
Ensure the connection is solid.
6、 Connect the end of the AC cable to the utility grid socket.
7、 Make sure power plug of electricity equiepment connect with
this product’s plug AC output port..
8、 Connect the solar panels to the solar input of this equipment.
The red cable to positive, and black one to negative.Make
sure the connection is solid.
9、check and confirm all connections are correct.
■ Turn On
1、 Press “ON” button, the buzzer beeps one time, meanwhile the
LCD is lighted. The AC indicator light will go out after self
checking with flashing 10 times. After that, the inverting
indicator is on and start working.
2、 If AC input voltage exceeds its rated range, it will switch to
inverter mode automatically.
3、 Introduction to LCD display.
