The taskbar at the top of the display provides status
information:
Indicator Notes
Charging @80%80%
Fully Charged
100%
Charging @60%60%
Charging @40%40%
Charging @20%20%
80% 80%
100%
60% 60%
40% 40%
20% 20%
10%
<20%
Example of warning on device
Screens
Brightness
20%
20%
OK
Low Battery Warning Screen
20%
OK
Lock Screen
Battery Status
push to unlock
No hearing devices are
synced at this time.
Bluetooth active 80%
Bluetooth connected 80%
Bluetooth connect to 2 devices 80%
x2
When the SurfLink Mobile Bluetooth antenna
is on, indicator will display on the left side of
the taskbar. When the Bluetooth antenna is
off, no indicator will display.
Charging @80%80%
Fully Charged
100%
Charging @60%60%
Charging @40%40%
Charging @20%20%
80% 80%
100%
60% 60%
40% 40%
20% 20%
10%
<20%
Example of warning on device
Screens
Brightness
20%
20%
OK
Low Battery Warning Screen
20%
OK
Lock Screen
Battery Status
push to unlock
No hearing devices are
synced at this time.
Bluetooth active 80%
Bluetooth connected 80%
Bluetooth connect to 2 devices 80%
x2
If an advisory message is available, an
indicator will display in the center of the
taskbar.
Charging @80%80%
Fully Charged
100%
Charging @60%60%
Charging @40%40%
Charging @20%20%
80% 80%
100%
100%
60% 60%
40% 40%
20% 20%
10%
<20%
Example of warning on device
Screens
Brightness
20%
20%
OK
Low Battery Warning Screen
20%
OK
Lock Screen
Battery Status
push to unlock
No hearing devices are
synced at this time.
Bluetooth active 80%
Bluetooth connected 80%
Bluetooth connect to 2 devices 80%
x2
The SurfLink Mobile battery status is
shown on the right side of the taskbar. For
example, a fully-charged SurfLink Mobile
shows 100% battery charge.
Charging @80%80%
Fully Charged
100%
Charging @60%60%
Charging @40%40%
Charging @20%20%
80% 80%
100%
10%
<20%
Example of warning on device
Screens
Brightness
20%
20%
OK
Low Battery Warning Screen
20%
OK
Lock Screen
Battery Status
push to unlock
No hearing devices are
synced at this time.
Bluetooth active 80%
Bluetooth connected 80%
Bluetooth connect to 2 devices 80%
x2
If less than 20% battery charge remains,
a low battery warning message appears.
SurfLink Mobile should be promptly
recharged.
Charging @80%80%
Fully Charged
100%
Charging @60%
60%
Charging @40%40%
Charging @20%20%
80% 80%
100%
60% 60%
40% 40%
20% 20%
10%
<20%
Example of warning on device
Screens
Brightness
20%
20%
OK
Low Battery Warning Screen
20%
OK
Lock Screen
Battery Status
push to unlock
No hearing devices are
synced at this time.
Bluetooth active 80%
Bluetooth connected 80%
Bluetooth connect to 2 devices 80%
x2
When properly recharging, indicator will
display next to battery status.
Charging @80%80%
Fully Charged
100%
Charging @60%60%
Charging @40%40%
Charging @20%20%
80% 80%
100%
60% 60%
40% 40%
20% 20%
10%
<20%
Example of warning on device
Screens
Brightness
20%
20%
OK
Low Battery Warning Screen
20%
OK
Lock Screen
Battery Status
push to unlock
No hearing devices are
synced at this time.
Bluetooth active 80%
Bluetooth connected 80%
Bluetooth connect to 2 devices 80%
x2
When exactly one Handsfree Profile
Bluetooth device (typically, this would be
your cell phone) is connected, then the
Bluetooth icon will be surrounded by a
blue circle.
Charging @80%80%
Fully Charged
100%
Charging @60%60%
Charging @40%40%
Charging @20%20%
80% 80%
100%
60% 60%
40% 40%
20% 20%
10%
<20%
Example of warning on device
Screens
Brightness
20%
20%
OK
Low Battery Warning Screen
20%
OK
Lock Screen
Battery Status
push to unlock
No hearing devices are
synced at this time.
Bluetooth active 80%
Bluetooth connected 80%
Bluetooth connect to 2 devices 80%
x2
When two Handsfree Profile Bluetooth
devices are connected, then “x2” will be
added to the circled Bluetooth icon.
Volume Up Button
To increase the volume of sounds coming through
a hearing device, press and release the Volume Up
button on the side of SurfLink Mobile. Continue to
press and release until the desired volume is reached.
Volume Down Button
To decrease the volume of sounds coming through a
hearing device, press and release the Volume Down
button on the side of SurfLink Mobile. Continue to
press and release until the desired volume is reached.
Micro-USB Jack
The micro-USB jack is used for recharging the SurfLink
Mobile battery, as well as accepting audio from a
Line-In cable.
The enclosed Line-In cable allows
SurfLink Mobile to be connected
to any audio device with a female
3.5mm audio output jack. Simply
connect the micro-USB end of the
Line-In cable to SurfLink Mobile
(Figure 1) and connect the other
end to the audio device output jack.
See page 23 for more details on streaming audio to
hearing devices.
S
URF
L
INK
Fig. 1
12 13
Getting Started
Getting Started
