suprema XPass 2 Manuel utilisateur
XPass 2
INSTALLATION GUIDE
Version 1.03
English
EN 101.00.XP2-MDPB, XP2-GDPB, XP2-GKDPB V1.03A
CONTENTS
Safety instructions 2
Instructional icons 2
Introduction 4
Components 4
Name and function of each part 5
Installation 7
Fixing the bracket and the product 7
Power supply connection 9
Network connection 9
TTL input connection 10
Relay connection 11
Connecting as a standalone 13
Connecting to Secure I/O 2 14
Wiegand connection 15
Resetting Network Settings 15
Restoring the Factory Defaults 15
Product specifications 16
Dimensions 17
XP2-MDPB 17
XP2-GDPB, XP2-GKDPB 17
FCC compliance information 18
EU Declaration of Conformity (CE) 18
Appendices 19
Disclaimers 19
Copyright notice 19
Open Source License 20
GNU General Public License 20
TERMS AND CONDITIONS 21
GNU Lesser General Public License 27
OpenSSL License 29
Original SSLeay License 29
2
Safety instructions
Safety instructions
Please read this safety instructions before you use the product to prevent injury to yourself and others and to prevent
property damage. The term ‘product’ in this manual refers to the product and any items provided with the product.
Instructional icons
Warning: This symbol indicates situations that could result in death or severe injury.
Caution: This symbol indicates situations that may result in moderate injury or property damage.
Note: This symbol indicates notes or additional information.
Warning
Installation
Do not install or repair the product arbitrarily.
• This may result in electric shock, fire, or product damage.
• Damages caused by any modifications or failure to follow installation instructions can void your manufacturer’s
warranty.
Do not install the product in a place with direct sunlight, moisture, dust, soot, or a gas leak.
• This may result in electric shock or fire.
Install the product in a well-ventilated and cool place away from direct sunlight to prevent overheating when
installing it outside.
Do not place the product inside the sealed enclosure when installing it outside.
• It increases the internal temperature of the enclosure and this may result in electric shock, fire, or malfunction.
Do not install the product in a location with heat from an electric heater.
• This may result in fire due to overheating.
Install the product in a dry location.
• Humidity and liquids may result in electric shock or product damage.
Do not install the product in a location where it will be affected by radio frequencies.
• This may result in fire or product damage.
Operation
Keep the product dry.
• Humidity and liquids may result in electric shock, fire, or product damage.
Do not use damaged power supply adaptors, plugs, or loose electrical sockets.
• Unsecured connections may cause electric shock or fire.
Do not bend or damage the power cord.
• This may result in electric shock or fire.
3
Safety instructions
Caution
Installation
Do not install the product under direct sunlight or UV light.
• This may result in product damage, malfunction, discoloration, or deformation.
Do not install the power supply cable in a location where people pass by.
• This may result in injury or product damage.
Do not install the product near magnetic objects, such as a magnet, TV, monitor (especially CRT), or speaker.
• The product may malfunction.
Do not seal around the product with silicone, etc. when installing it on the wall.
• The product may malfunction.
Keep the minimum distance between products when installing multiple products.
• The product may be affected by radio frequencies emitted by other products and the product may malfunction.
Use the IEC/EN 62368-1 approved power adaptor that supports higher power consumption than the product. It
is highly recommended to use the power adaptor sold by Suprema.
• If the right power supply is not used, the product may malfunction.
Use a separate power supply for the Secure I/O 2, electric lock, and the product.
• If connecting and using the same power supply, the product may malfunction.
Do not connect and use the power supply and Power over Ethernet (PoE) simultaneously.
• The product may malfunction.
It is recommended to use the enclosure if the product is installed outside.
• The product may malfunction if the water-resistant and dust-resistant features are damaged.
Operation
Do not drop the product or cause impacts to the product.
• The product may malfunction.
Do not disconnect the power supply while upgrading the firmware of the product.
• The product may malfunction.
Do not disclose the password to others and change it regularly.
• This may result in illegal intrusion.
Do not store your product in very hot or very cold places. It is recommended to use your product at
temperatures from -35 °C to 65 °C.
• The product may malfunction.
When cleaning the product, mind the following.
• Wipe the product with a clean and dry towel.
• If you need to sanitize the product, moisten the cloth or the wipe with a proper amount of rubbing alcohol and gently
clean all exposed surfaces including fingerprint sensor. Use rubbing alcohol (containing 70% Isopropyl alcohol) and a
clean, non-abrasive cloth like lens wipe.
• Do not apply liquid directly to the surface of the product.
Do not use the product for anything other than its intended use.
• The product may malfunction.
4
Safety instructions
RTC battery
Discard the battery according to the appropriate regional or international waste regulations. Discard the battery according
to the appropriate regional or international waste regulations.
5
Introduction
Introduction
Components
Device and Wall Bracket
(XP2-MDPB)
Device and Wall Bracket
(XP2-GDPB)
Device and Wall Bracket
(XP2-GKDPB)
PVC Anchor x2 Fixing Screw x2 Bracket Fixing Screw
(Star Shaped) Diode
132.2
83.5
39.8
XPD2-M
XP2-M
Drilling Template Shrink Tube 120 Ω resistor Ferrite Core
XPass 2
XPass 2 MDPB
201.00.XP2 V1.02A
XPass 2
XPass 2 GDPB
201.00.XP2 V1.02A
XPass 2
XPass 2 GKDPB
201.00.XP2 V1.02A
Open Source Software
Linux Kernel GPL
glibc LGPL
QT LGPL
OpenSSL
Original SSLeay
306.00 V1.03A
A
Quick Guide
(XP2-MDPB)
Quick Guide
(XP2-GDPB)
Quick Guide
(XP2-GKDPB)
Open Source Software
Guide
• Components may vary according to the installation environment.
• When assembling the product with the bracket, you can use the included bracket fixing screw (Star Shaped)
instead of the product fixing screw for enhanced security.
6
Introduction
Name and function of each part
LED Indicator
RF card and
mobile access card
authentication unit
Reset Button
Cable
Name Description
LED Indicator
Indicates the operational status of the device with the color of the LED.
• Green solid: Authentication success
• Red solid: Authentication failure
• Blue/Sky blue blinking: Normal operation
• Blue/Green blinking: When initializing network settings
• Green blinking: Waiting for an input
• Green/White blinking: Connecting with the Airfob Pass (BLE) application of Suprema
• White blinking: Connecting with the Device Manager application of Suprema
RF card and mobile access card
authentication unit Reads RF cards for entering and exiting.
Reset button Initialize the device.
Cable
• Power cable
• RS-485 cable
• Wiegand output cable
• LED input cable
• Beep Input cable
• Tamper cable
Keypad
Used to authenticate by entering the card ID directly. If you want to enter the ID directly,
change the authentication method settings in BioStar 2.
• 0 ~ 9: Enters number.
• : Separates the FC code from the ID when entering the Wiegand card ID.
• : Used to finish entering.
Keypad
7
Introduction
Only the XP2-GKDPB model supports the keypad.
Cables
This document describes cable information based on the shape of the XP2-MDPB model. The same cable
configuration is also used for XP2-GDPB and XP2-GKDPB models.
1234567891011
1213141516171819202122
Pin Name Color
1485 TRXP Blue (White stripe)
2485 TRXN Yellow (Black stripe)
3485 GND White (Black stripe)
4ENET RXN Yellow
5ENET RXP Black
6ENET TXN Orange
7ENET TXP White
8ENET VB1 Red
9ENET VB1 Green
10 ENET VB2 Blue
11 ENET VB2 Brown
12 WG GND Black
13 WG D1 White
14 WG D0 Green
15 TTL IN0 Purple
16 TTL IN1 Brown
17 TTL GND Gray
18 RLY NO Gray (White stripe)
19 RLY COM Green (White stripe)
20 RLY NC Orange (White stripe)
21 PWR +VDC Red
22 PWR GND Black (White stripe)
8
Installation
Installation
Fixing the bracket and the product
This document describes the installation method using XP2-MDPB model. Install XP2-GDPB and XP2-GKDPB
models in the same way.
1
Determine the correct position to install the bracket using the provided drilling template. Fix the bracket firmly using
fixing screws through the bracket to the position where XPass 2 will be installed.
• If installing XPass 2 on a concrete wall, drill holes, insert PVC anchors, and fix them with fixing screws.
• To avoid RF interference, a minimum separation distance must be maintained.
XP2-MDPB
Wall thickness
Distance
Wall
Wall thickness Distance
100 mm 360 mm
120 mm 360 mm
150 mm 300 mm
Wall
400 mm
XP2-GDPB, XP2-GKDPB
Wall thickness
Distance
Wall
Wall thickness Distance
100 mm 400 mm
120 mm 380 mm
150 mm 380 mm
Wall
430 mm
•
When using Suprema Mobile Access, install a minimum distance of 1 m between devices to avoid BLE interference.
9
Installation
2
Install XPass 2 onto the fixed bracket.
3
Assemble XPass 2 with the bracket by rotating the product fixing screw.
• When assembling the product with the bracket, you can use the included bracket fixing screw(Star Shaped)
instead of the product fixing screw for enhanced security.
Ce manuel convient aux modèles suivants
3
Table des matières
Autres manuels suprema Système RFID
