Supero SUPERSERVER 6025W-NTR+ Manuel utilisateur

SUPERSERVER 6025W-NTR+

SUPER

USER’S MANUAL

1.0a

Manual Revision 1.0a

Release Date: November 4, 2008

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software, if any,

and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or

reduced to any medium or machine without prior written consent.

IN NO EVENT WILLSUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATASTORED OR USED WITH THE PRODUCT, INCLUDINGTHE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for

all claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SuperServer 6025W-NTR+.

Installation and maintainance should be performed by experienced technicians

only.

The SuperServer 6025W-NTR+ is a high-end server based on the SC825TQ-

R700LP 2U rackmount chassis and the X7DWN+, a dual processor serverboard that

supports dual Intel®XeonTM LGA 771 processors and up to 128 GB of registered

FBD ECC DDR2-800/667/533 SDRAM.

Manual Organization

Chapter 1: Introduction

The ﬁrst chapter provides a checklist of the main components included with the

server system and describes the main features of the X7DWN+ serverboard and

the SC825TQ-R700LP chassis, which comprise the SuperServer 6025W-NTR+.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer 6025W-NTR+

into a rack and check out the server conﬁguration prior to powering up the system.

If your server was ordered without processor and memory components, this chapter

will refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 6025W-NTR+.

SUPERSERVER 6025W-NTR+ User's Manual

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the X7DWN+ serverboard, including the

locations and functions of connections, headers and jumpers. Refer to this chapter

when adding or removing processors or main memory and when reconﬁguring the

serverboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC825TQ-R700LP server chassis.

You should follow the procedures given in this chapter when installing, removing or

reconﬁguring SATA or peripheral drives and when replacing system power supply

units and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup Utility.

Appendix A: BIOS POST Messages

Appendix B: BIOS POST Codes

Appendix C: Intel HostRaid Setup Guidelines

Appendix D: Adaptec HostRaid Setup Guidelines

Appendix E: System Speciﬁcations

Preface

Table of Contents

Chapter 1 Introduction

1-1 Overview .........................................................................................................1-1

1-2 Serverboard Features..................................................................................... 1-2

Processors ......................................................................................................1-2

Memory ...........................................................................................................1-2

Serial ATA ....................................................................................................... 1-2

PCI Expansion Slots....................................................................................... 1-2

UIO..................................................................................................................1-2

Onboard Controllers/Ports .............................................................................. 1-3

ATI Graphics Controller...................................................................................1-3

Other Features................................................................................................ 1-3

1-3 Server Chassis Features ................................................................................ 1-3

System Power................................................................................................. 1-3

Serial ATA Subsystem.....................................................................................1-3

Front Control Panel......................................................................................... 1-4

I/O Backplane.................................................................................................. 1-4

Cooling System............................................................................................... 1-4

1-4 Contacting Supermicro....................................................................................1-6

Chapter 2 Server Installation

2-1 Overview.............................................................................................................2-1

2-2 Unpacking the System.................................................................................... 2-1

2-3 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-1

Rack Precautions............................................................................................ 2-2

Server Precautions..........................................................................................2-2

Rack Mounting Considerations....................................................................... 2-3

Ambient Operating Temperature................................................................2-3

Reduced Airﬂow .........................................................................................2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-4 Installing the System into a Rack ...................................................................2-4

Identifying the Sections of the Rack Rails......................................................2-4

Installing the Chassis Rails.............................................................................2-4

Installing the Rack Rails: ................................................................................2-6

Installing the Server into the Rack.................................................................. 2-6

SUPERSERVER 6025W-NTR+ User's Manual

Installing the Server into a Telco Rack...........................................................2-6

2-5 Checking the Serverboard Setup.................................................................... 2-8

2-6 Checking the Drive Bay Setup...................................................................... 2-10

Chapter 3 System Interface

3-1 Overview .........................................................................................................3-1

3-2 Control Panel Buttons.....................................................................................3-1

Reset...............................................................................................................3-1

Power..............................................................................................................3-1

3-3 Control Panel LEDs ........................................................................................3-2

Power Fail.......................................................................................................3-2

Overheat/Fan Fail: .......................................................................................... 3-2

NIC1................................................................................................................3-2

NIC2................................................................................................................3-2

HDD................................................................................................................. 3-3

Power..............................................................................................................3-3

3-4 Drive Carrier LEDs.......................................................................................... 3-3

Chapter 4 System Safety

4-1 Electrical Safety Precautions..........................................................................4-1

4-2 General Safety Precautions............................................................................ 4-2

4-3 ESD Precautions............................................................................................. 4-3

4-4 Operating Precautions .................................................................................... 4-4

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard............................................................................... 5-1

Precautions .....................................................................................................5-1

Unpacking .......................................................................................................5-2

5-2 Serverboard Installation.................................................................................. 5-2

5-3 Connecting Cables.......................................................................................... 5-3

Connecting Data Cables................................................................................. 5-3

Connecting Power Cables .............................................................................. 5-3

Connecting the Control Panel......................................................................... 5-3

5-4 I/O Ports.......................................................................................................... 5-4

5-5 Installing the Processors and Heat Sinks.......................................................5-5

Memory Support..............................................................................................5-9

5-7 Adding PCI Add-On Cards............................................................................ 5-10

5-8 Serverboard Details .......................................................................................5-11

X7DWN+ Quick Reference........................................................................... 5-12

5-9 Connector Deﬁnitions ...................................................................................5-13

5-10 Jumper Settings............................................................................................ 5-19

vii

Table of Contents

5-11 Onboard Indicators........................................................................................5-23

5-12 Floppy, IDE, and SATA Ports........................................................................5-24

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices..................................................................................6-1

Precautions .....................................................................................................6-1

Unpacking .......................................................................................................6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 System Fans................................................................................................... 6-3

System Fan Failure......................................................................................... 6-3

Replacing System Fans.................................................................................. 6-3

6-4 Drive Bay Installation/Removal....................................................................... 6-4

Accessing the Drive Bays............................................................................... 6-4

SATA Drive Installation.................................................................................... 6-5

Hard Drive Backplane..................................................................................... 6-6

DVD-ROM and Floppy Drive Installation........................................................6-7

6-5 Power Supply.................................................................................................. 6-8

Power Supply Failure......................................................................................6-8

Removing/Replacing the Power Supply.......................................................... 6-8

Chapter 7BIOS

7-1 Introduction...................................................................................................... 7-1

7-2 Running Setup ................................................................................................ 7-2

7-3 Main BIOS Setup............................................................................................ 7-2

Main BIOS Setup Menu.................................................................................. 7-3

Main Setup Features.......................................................................................7-3

7-4 Advanced Setup.............................................................................................. 7-6

7-5 Security ......................................................................................................... 7-25

7-6 Boot...............................................................................................................7-26

7-7 Exit ................................................................................................................ 7-27

Appendix A BIOS POST Messages

Appendix B BIOS POST Codes

Appendix C Intel HostRAID Setup Guidelines

Appendix D Adaptec HostRAID Setup Guidelines

Appendix E System Speciﬁcations

Notes

viii

SUPERSERVER 6025W-NTR+ User's Manual

Chapter 1

Introduction

1-1 Overview

The SuperServer 6025W-NTR+ is a high-end server that is comprised of two main

subsystems: the SC825TQ-R700LP 2U server chassis and the X7DWN+ dual

Intel® Xeon® processor serverboard. Please refer to our web site for information

on operating systems that have been certiﬁed for use with the SuperServer 6025W-

NTR+ (www.supermicro.com).

In addition to the serverboard and chassis, various hardware components have

been included with the SuperServer 6025W-NTR+, as listed below:

Three (3) 8-cm hot-swap chassis fans (FAN-0094L)

•

One (1) air shroud (MCP-310-82502-0N)•

Two (2) CPU passive heatsinks (SNK-P0025P)•

One (1) DVD-ROM drive (DVM-PNSC-824)•

Two (2) 3.5" dummy drive trays•

One (1) DVD-ROM drive (DVM-PNSC-824B)•

One (1) front control panel cable (CBL-0087)•

One (1) rail set (MCP-290-00002-00)•

SATA Accessories•

One (1) SATA backplane (BPN-SAS-825TQ)

One (1) 2-ft SATA cable (CBL-0044L)

Two (2) 35-mm SATA cables (CBL-0061L)

Two (2) 48-cm SATA cables (CBL-0178L)

One (1) 70-cm SATA cable (CBL-0179L)

Two (2) SATA SGPIO cables (CBL-0157L)

Eight (8) SATA hot-swap drive carriers (MCP-220-00001-01)

(The chassis has eight carriers but only six SATA drives are supported.)

Chapter 1: Introduction

1-1-1

1-2

SUPERSERVER 6025W-NTR+ User's Manual

1-2 Serverboard Features

At the heart of the SuperServer 6025W-NTR+ lies the X7DWN+, a dual processor

serverboard based on the Intel 5400 chipset and designed to provide maximum

performance. Below are the main features of the X7DWN+. (See Figure 1-1 for a

block diagram of the 5400 chipset).

Processors

The X7DWN+ supports single or dual LGA771 type Intel Xeon processors at a FSB

speed of 1600/1333/1066 MHz. (Quad-Core Intel Xeon Processor 5400/5300LV or

Dual-Core Intel Xeon Processor 5200/5100LV sequence, both CPUs must be of the

same type.) Please refer to the serverboard description pages on our web site for

a complete listing of supported processors (www.supermicro.com).

Memory

The X7DWN+ has sixteen 240-pin DIMM slots that can support up to 128 GB of

FBD (Fully Buffered DIMM) ECC DDR2-800/667/533 SDRAM. Both 1.5V and 1.8V

memory are supported. The memory operates in a 4-way interleaved conﬁgurations

and requires requires modules of the same size and speed to be installed two at a

time. See Chapter 5 for details.

Serial ATA

A SATA controller is integrated into the ESB2 (South Bridge) portion of the 5400

chipset to provide a six-port 3 Gb/s Serial ATA subsystem, which is RAID 0, 1, 10

and 5 supported. The Serial ATA drives are hot-swappable units.

Note: The operating system you use must have RAID support to enable the hot-

swap capability and RAID function of the Serial ATA drives.

PCI Expansion Slots

The X7DWN+ has three PCI-Express x8 slots (two are Gen 2), one PCI-Express

x4 slot (in a x8 slot), two 64-bit 133/100 MHz PCI-X slots and one UIO slot (see

below).

UIO

The X7DWN+ is a specially-designed serverboard that features Supermicro's UIO

(Universal I/O) technology. UIO serverboards have a PCI-Express x8 connector

that can support any one of several types of UIO card types (low-proﬁle only) to

add SAS ports, additional LAN ports, etc. to the serverboard. This allows the user

Table des matières

Autres manuels Supero Serveur

Supero

Supero SUPERSERVER 6016T-6RFT+ Manuel utilisateur

Supero

Supero SuperServer 2026TT-DLRF Manuel utilisateur

Supero

Supero SuperServer 6027PR-HC1R Manuel utilisateur

Supero

Supero 2U Twin3 2015TA-HTRF Manuel utilisateur

Supero

Supero SUPERSERVER 1027GR-TRF Manuel utilisateur

Supero

Supero SC733i-665B Manuel utilisateur

Supero

Supero AS-1010S-T Manuel utilisateur

Supero

Supero SUPERSERVER 6016T-URF Manuel utilisateur

Supero

Supero SuperServer 6026TT-HTF Manuel utilisateur

Supero

Supero SuperServer 6028R-TR Manuel utilisateur

Supero

Supero SuperServer 1012G-MTF Manuel utilisateur

Supero

Supero SUPERSERVER 1018GR-T Manuel utilisateur

Supero

Supero SUPERSERVER 2028TP-DC0R Manuel utilisateur

Supero

Supero SuperServer 6028U Series Manuel utilisateur

Supero

Supero SUPERSERVER 5016T-MTFB Manuel utilisateur

Supero

Supero AS1021M-UR Plus Manuel utilisateur

Supero

Supero SUPERSERVER 6017R-N3RF4+ Manuel utilisateur

Supero

Supero SuperServer 7034L-i Manuel utilisateur

Supero

Supero SUPER STORAGE SYSTEM 6047R-E1CR36L Manuel utilisateur

Supero

Supero Supero SUPERSERVER 5017A-EP Manuel utilisateur

Supero

Supero Supero SC815TQ-700VB Manuel utilisateur

Supero

Supero AS-4021M-82R Plus Manuel utilisateur

Supero

Supero SUPERSERVER 6017R-WRF Manuel utilisateur

Supero

Supero SUPERSERVER 2026T-6RFT+ Manuel utilisateur

Manuels Serveur populaires d'autres marques

HP AlphaServer ES47 Manuel utilisateur

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

HP ProLiant Gen9 Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

HP Integrity rx2600 Guide d'installation

Milestone

Milestone Husky IVO 350T Manuel utilisateur

Planet

Planet NAS-7410 Manuel utilisateur