Supero Supero SUPERSERVER 5025B-4 Manuel utilisateur

USER’S MANUAL

1.0

SUPER

SUPERSERVER 5025B-4

SUPERSERVER 5025B-T

Manual Revision 1.0

Release Date: December 31, 2007

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software, if any,

and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or

reduced to any medium or machine without prior written consent.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for

all claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SuperServer 5025B-4/5025B-

T. Installation and maintainance should be performed by experienced technicians

only.

The SuperServer 5025B-4/5025B-T is a high-end, single Intel® Xeon processor

server based on the SC822S-400LP/SC822TQ-400LP 2U rackmount server chassis

and the X7SB4/X7SBE motherboard, which supports single Intel® Xeon 3200/3000

Series processors. Refer to the motherboard speciﬁcations pages on our web site

for updates on supported processors.

Manual Organization

Chapter 1: Introduction

The ﬁrst chapter provides a checklist of the main components included with the

server system and describes the main features of the X7SB4/X7SBE motherboard

and the SC822S-400LP/SC822TQ-400LP chassis, which make up the SuperServer

5025B-4/5025B-T.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer 5025B-

4/5025B-T into a rack and check out the server conﬁguration prior to powering up

the system. If your server was ordered without processor and memory components,

this chapter will refer you to the appropriate sections of the manual for their instal-

lation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

iii

Preface

SUPERSERVER 5025B-4/5025B-T User's Manual

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 5025B-4/5025B-T.

Chapter 5: Advanced Motherboard Setup

Chapter 5 provides detailed information on the X7SB4/X7SBE motherboard, includ-

ing the locations and functions of connectors, headers and jumpers. Refer to this

chapter when adding or removing processors or main memory and when reconﬁg-

uring the motherboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC822S-400LP/SC822TQ-400LP

2U server chassis. You should follow the procedures given in this chapter when

installing, removing or reconﬁguring SATA or peripheral drives and when replacing

the system power supply unit and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup Utility.

Appendix A: BIOS POST Messages

Appendix B: BIOS POST Codes

Appendix C: System Speciﬁcations

Preface

Notes

SUPERSERVER 5025B-4/5025B-T User's Manual

Table of Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Motherboard Features..................................................................................... 1-2

Processors ...................................................................................................... 1-2

Memory ........................................................................................................... 1-2

Onboard SCSI (5025B-4 only)........................................................................ 1-2

Onboard SATA................................................................................................. 1-2

PCI Expansion Slots ....................................................................................... 1-2

ATI Graphics Controller................................................................................... 1-3

Onboard Controllers/Ports .............................................................................. 1-3

Other Features ................................................................................................ 1-3

1-3 Server Chassis Features ................................................................................ 1-5

System Power ................................................................................................. 1-5

SCSI Subsystem (5025B-4 only) .................................................................... 1-5

Control Panel .................................................................................................. 1-5

I/O Backplane.................................................................................................. 1-5

Cooling System ............................................................................................... 1-5

1-4 Contacting Supermicro.................................................................................... 1-6

Chapter 2 Server Installation

2-1 Overview ............................................................................................................. 2-1

2-2 Unpacking the System .................................................................................... 2-1

2-3 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-2

Rack Precautions ............................................................................................ 2-2

Server Precautions.......................................................................................... 2-2

Rack Mounting Considerations ....................................................................... 2-3

Ambient Operating Temperature ................................................................ 2-3

Reduced Airﬂow ......................................................................................... 2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-4 Installing the System into a Rack ................................................................... 2-4

Identifying the Sections of the Rack Rails...................................................... 2-4

Installing the Chassis Rails............................................................................. 2-5

Installing the Rack Rails ................................................................................. 2-5

Installing the Server into the Rack.................................................................. 2-6

vii

Table of Contents

Installing the Server into a Telco Rack ........................................................... 2-7

2-5 Checking the Motherboard Setup ................................................................... 2-8

2-6 Checking the Drive Bay Setup...................................................................... 2-10

Chapter 3 System Interface

3-1 Overview ......................................................................................................... 3-1

3-2 Control Panel Buttons ..................................................................................... 3-1

Reset............................................................................................................... 3-1

Power .............................................................................................................. 3-1

3-3 Control Panel LEDs ........................................................................................ 3-2

Overheat/Fan Fail ........................................................................................... 3-2

NIC2 ................................................................................................................ 3-2

NIC1 ................................................................................................................ 3-2

HDD................................................................................................................. 3-2

Power .............................................................................................................. 3-3

3-4 Drive Carrier LEDs.......................................................................................... 3-3

Chapter 4 System Safety

4-1 Electrical Safety Precautions .......................................................................... 4-1

4-2 General Safety Precautions ............................................................................ 4-2

4-3 ESD Precautions............................................................................................. 4-3

4-4 Operating Precautions .................................................................................... 4-4

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard ............................................................................... 5-1

Precautions ..................................................................................................... 5-1

Unpacking ....................................................................................................... 5-2

5-2 Serverboard Installation .................................................................................. 5-2

5-3 Connecting Cables.......................................................................................... 5-3

Connecting Data Cables ................................................................................. 5-3

Connecting Power Cables .............................................................................. 5-3

Connecting the Control Panel......................................................................... 5-3

5-4 I/O Ports .......................................................................................................... 5-4

5-5 Installing the Processors and Heat Sink......................................................... 5-5

5-6 Installing Memory ............................................................................................ 5-9

Memory Support.............................................................................................. 5-9

5-7 Adding PCI Add-On Cards............................................................................ 5-10

5-8 Serverboard Details .......................................................................................5-11

X7SB4/X7SBE Quick Reference................................................................... 5-12

5-9 Connector Deﬁnitions ................................................................................... 5-13

5-10 Jumper Settings ............................................................................................ 5-19

SUPERSERVER 5025B-4/5025B-T User's Manual

viii

5-11 Onboard Indicators........................................................................................ 5-22

5-12 Floppy, IPMI, SCSI and SATA Ports ............................................................. 5-23

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices.................................................................................. 6-1

Precautions ..................................................................................................... 6-1

Unpacking ....................................................................................................... 6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 System Fans ................................................................................................... 6-3

System Fan Failure......................................................................................... 6-3

Replacing System Cooling Fans..................................................................... 6-3

6-4 Drive Bay Installation/Removal ....................................................................... 6-4

Accessing the Drive Bays ............................................................................... 6-4

SCSI/SATA Drive Installation .......................................................................... 6-5

Installing Components in the 5.25" Drive Bays .............................................. 6-7

6-5 Power Supply .................................................................................................. 6-8

Power Supply Failure...................................................................................... 6-8

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

7-2 Running Setup ................................................................................................ 7-2

7-3 Main BIOS Setup ............................................................................................ 7-2

7-4 Advanced Setup.............................................................................................. 7-6

7-5 Security Settings ........................................................................................... 7-22

7-6 Boot Settings................................................................................................. 7-23

7-7 Exit ................................................................................................................ 7-24

Appendix A BIOS POST Messages

Appendix B BIOS POST Codes

Appendix C Intel HostRAID Setup Guidelines

Appendix D Adaptec HostRAID Setup Guidelines

Chapter 1

Introduction

1-1 Overview

The SuperServer 5025B-4/5025B-T is a high-end, 2U rackmount server that features

some of the most advanced technology currently available. The SuperServer 5025B-

4/5025B-T is comprised of two main subsystems: the SC822S-400LP/SC822TQ-

400LP 2U chassis and the X7SB4/X7SBE Xeon processor motherboard. Please

refer to our web site for information on operating systems that have been certiﬁed

for use with the SuperServer 5025B-4/5025B-T. (www.supermicro.com).

In addition to the motherboard and chassis, various hardware components may have

been included with your SuperServer 5025B-4/5025B-T, as listed below:

One (1) 3.5" ﬂoppy drive (FPD-PNSC-01)

Four (4) chassis cooling fans (FAN-0044)

One (1) rackmount kit (CSE-PT25)

SCSI Accessories (5025B-4 only):

Six (6) SCA drive carriers (CSE-PT17-B)

One (1) SCA SAF-TE compliant SCSI backplane (CSE-SCA-822S)

One (1) internal 68-pin Ultra320/160 SCSI cable (CBL-033L-U320)

SATA Accessories (5025B-T only):

Six (6) SATA hard drive carriers (CSE-PT17B)

One (1) SATA backplane (BPN-SAS-823TQ-O-P)

Two (2) SGPIO cables (CBL-0157L)

Three (3) SATA data cables (CBL-0061L)

Three (3) SATA data cables (CBL-0178L)

One (1) active heatsink, optional (SNK-P0015A4)

One (1) IDE/SATA port adapter (CDM-PSATA, see Section 6-4)

One (1) CD containing drivers and utilities

SuperServer 5025B-4/5025B-T User's Manual

•

Chapter 1: Introduction

1-1

SUPERSERVER 5025B-4/5025B-T Manual

1-2

1-2 Motherboard Features

At the heart of the SuperServer 5025B-4/5025B-T lies the X7SB4/X7SBE, a single

Intel Xeon processor motherboard designed to provide maximum performance.

Below are the main features of the X7SB4/X7SBE. (See Figure 1-1 for a block

diagram of the chipset.)

Processors

The X7SB4/X7SBE supports single Intel Xeon 3200/3000 Series LGA775 proces-

sors at system bus speeds of 1333, 1066 and 800 MHz. Please refer to the mother-

board speciﬁcations pages on our web site for updates on supported processors.

Memory

The X7SB4/X7SBE has four 240-pin DIMM slots that can support up to 8 GB of

unbuffered ECC DDR2-800/667 SDRAM.

Onboard SCSI (5025B-4 only)

Onboard SCSI is provided with an Adaptec AIC-7901 SCSI controller chip, which

supports dual channel, Ultra320 SCSI at a burst throughput rate of 320 MB/sec.

The X7SB4 provides one SCSI port. Note: The operating system you use must

have RAID support to enable the hot-swap capability and RAID function of the

SCSI drives.

Onboard SATA

A SATA controller is built in to the ICH9R portion of the chipset to provide support

for a six port, 3 Gb/sec Serial ATA subsystem, which is RAID 0, 1, 5 and 10 sup-

ported. The SATA drives are hot-swappable units. Note: The operating system

you use must have RAID support to enable the hot-swap capability and RAID

function of the SATA drives.

PCI Expansion Slots

The X7SB4/X7SBE has one PCI-Express x8 slot, one PCI-Express x4 slot, two

64-bit 133 MHz PCI-X slots and two 64-bit 100 MHz PCI-X slots (one functions as

a ZCR slot for the X7SB4). An IPMI slot is also included on the board.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Supero Serveur

Supero

Supero SUPERSERVER 6017R-WRF Manuel utilisateur

Supero

Supero SUPERSERVER 5017R-MTF Manuel utilisateur

Supero

Supero Supero SUPERSERVER 5015A-L Manuel utilisateur

Supero

Supero Supero SuperServer 5016I-T Manuel utilisateur

Supero

Supero SUPERSERVER 6012L-6 Manuel utilisateur

Supero

Supero SC819TQ-R700UB Manuel utilisateur

Supero

Supero SUPERSERVER 1026T-URF4+ Manuel utilisateur

Supero

Supero 1026T-6RF+ Manuel utilisateur

Supero

Supero A+ SERVER 4042G-6RF Manuel utilisateur

Supero

Supero 1017A-MP Manuel utilisateur

Supero

Supero SUPERSERVER 1027GR-TRF Manuel utilisateur

Supero

Supero SUPERSERVER 6015B-Ni Manuel utilisateur

Supero

Supero SuperServer 5015B-MF Manuel utilisateur

Supero

Supero SuperServer 2028GR-TR Manuel utilisateur

Supero

Supero AS1021M-UR Plus Manuel utilisateur

Supero

Supero SUPERSERVER 6016XT-TF Manuel utilisateur

Supero

Supero SC836TQ-R800V(B) Manuel utilisateur

Supero

Supero AS-4021M-32R Manuel utilisateur

Supero

Supero Supero SC512-200B Manuel utilisateur

Supero

Supero SUPERSERVER 5017C-MTF Manuel utilisateur

Supero

Supero FatTwin F628R3-FC0 Manuel utilisateur

Supero

Supero Supero 6017R-73THDP+ Manuel utilisateur

Supero

Supero SUPERSERVER 6026T-3RF Manuel utilisateur

Supero

Supero SUPERSERVER 6037R-TXRF Manuel utilisateur

Manuels Serveur populaires d'autres marques

HP AlphaServer ES47 Manuel utilisateur

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

HP ProLiant Gen9 Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

HP Integrity rx2600 Guide d'installation

Milestone

Milestone Husky IVO 350T Manuel utilisateur

Planet

Planet NAS-7410 Manuel utilisateur