Supero BPN-SAS-816T-A6 Manuel utilisateur

Rev. 1.0

BPN-SAS-816T-A6 BACKPLANE

USER'S GUIDE

17 8 22

23 29

2329

17 8 22

23 29

17 8 22

23 29

822

321

123

BPN-SAS-816T-A6

REV:1.01

BAR CODE

DESIGNED IN USA

7 7

77 TEMPHDR

#0 #1

J1 J11

J2 J3J4 J9

J13

MH1

MH2

C45 C46

C47

C44

F13

C32

JP13

JP10

J7 J10 J12

+5V

+12V

SAS#5

SAS#4

SAS#3

SAS#2

+12V

+5V

SAS#1

SAS#0

SUPER ®

BPN-SAS-816T-A6 Backplane User's Guide

Manual Revision 1.0

Release Date: April 17, 2013

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

Table of Contents

Contacting Supermicro..................................................................................................iv

Returning Merchandise for Service................................................................................v

Chapter 1 Safety Guidelines

1-1 ESD Safety Guidelines ................................................................................... 1-1

1-2 General Safety Guidelines .............................................................................. 1-1

1-3 An Important Note to Users ............................................................................ 1-2

1-4 Introduction to the BPN-SAS-816T-A6 Backplane.......................................... 1-2

Chapter 2 Connectors and Pin Denitions

2-1 Front Connectors ............................................................................................ 2-1

2-2 FrontConnectorandPinDenitions............................................................... 2-2

BPN-SAS-816T-A6 Backplane User's Guide

Contacting Supermicro

Headquarters

Address: Super Micro Computer, Inc.

980 Rock Ave.

San Jose, CA 95131 U.S.A.

Tel: +1 (408) 503-8000

Fax: +1 (408) 503-8008

Email: [email protected] (General Information)

[email protected] (Technical Support)

Web Site: www.supermicro.com

Europe

Address: Super Micro Computer B.V.

Het Sterrenbeeld 28, 5215 ML

's-Hertogenbosch, The Netherlands

Tel: +31 (0) 73-6400390

Fax: +31 (0) 73-6416525

Email: [email protected] (General Information)

[email protected] (Technical Support)

[email protected] (Customer Support)

Asia-Pacic

Address: Super Micro Computer, Inc.

4F, No. 232-1, Liancheng Rd

Chung-Ho Dist., New Taipei City 235

Taiwan

Tel: +886-(2) 8226-3990

Fax: +886-(2) 8226-3991

Web Site: www.supermicro.com.tw

Technical Support:

Email: [email protected]

Tel: +886-(2)-8226-3990

Preface

Returning Merchandise for Service

A receipt or copy of your invoice marked with the date of purchase is required before

any warranty service will be rendered. You can obtain service by calling your vendor

for a Returned Merchandise Authorization (RMA) number. When returning to the

manufacturer, the RMA number should be prominently displayed on the outside of

the shipping carton, and mailed prepaid or hand-carried. Shipping and handling

charges will be applied for all orders that must be mailed when service is complete.

For faster service, RMA authorizations may be requested online (http://www.

supermicro.com/support/rma/).

Whenever possible, repack the backplane in the original Supermicro box, using the

original packaging materials. If these are no longer available, be sure to pack the

backplane in an anti-static bag and inside the box. Make sure that there is enough

packaging material surrounding the backplane so that it does not become damaged

during shipping.

This warranty only covers normal consumer use and does not cover damages in-

curred in shipping or from failure due to the alteration, misuse, abuse or improper

maintenance of products.

Duringthewarrantyperiod,contactyourdistributorrstforanyproductproblems.

BPN-SAS-816T-A6 Backplane User's Guide

Notes

1-1

Chapter 1 Safety Guidelines

Chapter 1

Safety Guidelines

To avoid personal injury and property damage, carefully follow all the safety steps

listed below when accessing your system or handling the components.

1-1 ESD Safety Guidelines

Electrostatic Discharge (ESD) can damage electronic components. To prevent dam-

age to your system, it is important to handle it very carefully. The following measures

are generally sufcient to protect your equipment from ESD.

•Use a grounded wrist strap designed to prevent static discharge.

•Touch a grounded metal object before removing a component from the antistatic

bag.

•Handle the backplane by its edges only; do not touch its components, peripheral

chips, memory modules or gold contacts.

•When handling chips or modules, avoid touching their pins.

•Put the card and peripherals back into their antistatic bags when not in use.

1-2 General Safety Guidelines

•Always disconnect power cables before installing or removing any components

from the computer, including the backplane.

•Disconnect the power cable before installing or removing any cables from the

backplane.

•Make sure that the backplane is securely and properly installed on the mother-

board to prevent damage to the system due to power shortage.

1-2

BPN-SAS-816T-A6 Backplane User's Guide

1-3 An Important Note to Users

All images and layouts shown in this user's guide are based upon the latest PCB

Revision available at the time of publishing. The card you have received may or

may not look exactly the same as the graphics shown in this manual.

1-4 Introduction to the BPN-SAS-816T-A6 Backplane

The BPN-SAS-816T-A6 backplane has been designed to utilize the most up-to-date

technology available, providing your system with reliable, high-quality performance.

This manual reects BPN-SAS-816T-A6 Revision 1.01, the most current release

available at the time of publication. Always refer to the Supermicro web site at www.

supermicro.comforthelatestupdates,compatiblepartsandsupportedcongura-

tions.

2-1

Chapter 2 Jumper Settings and Pin Denitions

17 8 22

23 29

2329

17 8 22

23 29

17 8 22

23 29

822

321

123

BPN-SAS-816T-A6

REV:1.01

BAR CODE

DESIGNED IN USA

7 7

77 TEMPHDR

#0 #1

J1 J11

J2 J3J4 J9

J13

MH1

MH2

C45 C46

C47

C44

F13

C32

JP13

JP10

J7 J10 J12

+5V

+12V

SAS#5

SAS#4

SAS#3

SAS#2

+12V

+5V

SAS#1

SAS#0

The BPN-SAS-816T-A6 backplane features the following front connectors:

Front Connectors

1. Power Connector: (4-pin) JP10

2. Power Connector: (4-pin) JP13

3. SATA Connector #0: (7-pin), J5, connect to cable.

4. SATA Connector #1: (7-pin), J6, connect to cable.

5. SATA Connector #2: (7-pin), J8, connect to cable.

6. SATA Connector #3: (7-pin), J7, connect to cable.

7. SATA Connector #4: (7-pin), J10, connect to cable.

8. SATA Connector #5: (7-pin), J12, connect to cable.

9. SAS#0 Connector: J1.

10. SAS#1 Connector: J2.

11. SAS#2 Connector: J3.

12. SAS#3 Connector: J4.

13. SAS#4 Connector: J9.

14. SAS#5 Connector: J11

15. Temperature Sensor Header: J13.

Chapter 2

ConnectorsandPinDenitions

2-1 Front Connectors

13 1

Figure 2-1: Front Connectors

2-2

BPN-SAS-816T-A6 Backplane User's Guide

2-2 FrontConnectorandPinDenitions

Backplane

Main Power

4-Pin Connector

Pin#Denition

4+12V

1 and 2 Ground

3 +5V

1. - 2. Power Connectors

The 4-pin connectors are designated JP10

and JP13. These connectors provide power to

the backplane. See the table on the right for

pindenitions.

3. - 8. SATA Connectors

The SATA connectors are used to connect the

SATA cables. The six connectors are desig-

nated #0, #1, #2, #3, #4 and #5.

9. - 14. SAS Connectors

The SAS connectors are used to connect the

hard drives. The six connectors are designated

SAS#0, SAS#1, SAS#2, SAS#3, SAS#4 and

SAS#5. Each connector is compatible with

SATA and SAS drives.

15. Temperature Sensor Header

The temperature sensor header is designated

J13.

Table des matières

Autres manuels Supero Serveur

Supero

Supero 2U Twin3 2015TA-HTRF Manuel utilisateur

Supero

Supero SC823TQ-653LPB Manuel utilisateur

Supero

Supero SuperWorkstation 7036A-T Manuel utilisateur

Supero

Supero SUPERSERVER 7046GT-TRF Manuel utilisateur

Supero

Supero 1027R-WRF4+ Manuel utilisateur

Supero

Supero SuperServer 6033P-8R Manuel utilisateur

Supero

Supero SuperServer 2027R-N3RF4+ Manuel utilisateur

Supero

Supero SUPERO SuperServer 5037MC-H8TRF Manuel utilisateur

Supero

Supero SuperServer 7042S-i Manuel utilisateur

Supero

Supero SUPERSERVER 1027R-72RFTP Manuel utilisateur

Supero

Supero SUPERSERVER 5015M-NT Manuel utilisateur

Supero

Supero AS-1041M-T2 Plus Manuel utilisateur

Supero

Supero SUPERSERVER 6113L-8 Manuel utilisateur

Supero

Supero SUPERSERVER 6026T-3RF Manuel utilisateur

Supero

Supero AS1021M-T2R Manuel utilisateur

Supero

Supero 2027R-WRF Manuel utilisateur

Supero

Supero SUPERSERVER 7046GT-TRF Manuel utilisateur

Supero

Supero SuperServer 1027GR-72RT2+ Manuel utilisateur

Supero

Supero MicroCloud 5038ML-H12TRF Manuel utilisateur

Supero

Supero SUPERSERVER 5018A-TN4 Manuel utilisateur

Supero

Supero SUPERSERVER 1018D-73MTF Manuel utilisateur

Supero

Supero SUPERO SUPERSERVER 8026B-6RF Manuel utilisateur

Supero

Supero 8047R-7JRFT Manuel utilisateur

Supero

Supero 6027R-3RF4 Manuel utilisateur

Manuels Serveur populaires d'autres marques

HP AlphaServer ES47 Manuel utilisateur

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

HP ProLiant Gen9 Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

HP Integrity rx2600 Guide d'installation

Milestone

Milestone Husky IVO 350T Manuel utilisateur

Planet

Planet NAS-7410 Manuel utilisateur