Supero AOC-UINF-M2 Manuel utilisateur

Rev. 1.0

AOC-UINF-M2

USER'S GUIDE

SUPER ®

AOC-UINF-M2 Add-on Card User's Guide

Manual Revision 1.0

Release Date: March 17, 2008

Unless you request and receive written permission from SUPER MICRO COMPUTER, you may not

copy or otherwise reproduce/distribute any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software, if any,

and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or

reduced to any medium or machine without prior written consent.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara

shall be the exclusive venue for the resolution of any such disputes. Super Micro's total liability

for all claims will not exceed the price paid for the hardware product.

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

iii

Safety Information and Technical Speciﬁcations

Table of Contents

Introduction

Overview ............................................................................................................iv

Product Features................................................................................................iv

Supported Operating Systems .......................................................................................v

Required Cables.............................................................................................................v

Supported Platforms.......................................................................................................v

Motherboards ......................................................................................................v

Servers ................................................................................................................v

Contacting Supermicro...................................................................................... vii

Returning Merchandise for Service ................................................................. viii

Chapter 1 Safety Guidelines

1-1 ESD Safety Guidelines ................................................................................... 1-1

1-2 General Safety Guidelines .............................................................................. 1-1

1-3 An Important Note to Users ............................................................................ 1-2

Chapter 2 Add-on Card Components

2-1 Front Connectors and LEDs ........................................................................... 2-1

2-2 Front Connector and LED Deﬁnitions............................................................. 2-2

Chapter 3 Installation

3-1 Before Installation ........................................................................................... 3-1

3-2 Hardware Installation ...................................................................................... 3-1

3-3 Windows 2003/XP/2000 Driver Installation..................................................... 3-2

AOC-UINF-M2 Add-on Card User's Guide

Introduction

Overview

This manual is written for system integrators, PC technicians and knowledgeable

PC users who intend to integrate Supermicro's AOC-UINF-M2 Add-on Card.

Product Features

The AOC-UINF-M2 offers the following features:

Mellanox® ConnectX DDR MT25408A0-FCC-GI Controller

Low-proﬁle UIO form factor

Dual CX4 Connectors

20Gb/s per port

PCI-e X8 2.0

RoHS compliant 5/6

•

Safety Information and Technical Speciﬁcations

Supported Operating Systems

The AOC-UINF-M2 supports the following Operating Systems (OS):

Windows

Linux

VMWare ESX Server

Novell

Required Cables

The AOC-UINF-M2 requires CX4 copper-based cable:

Up to 10m for 20Gb/s or 20m for 10Gb/s

Supported Platforms

Motherboards

The following motherboards support the AOC-UINF-M2 add-on card.

H8SMU, PDSMU, X7DAL-E, X7DAL-E+, X7DBN, X7DBU, X7DCU, X7DWA-N,

X7DWN+, X7DWU or H8DMU+.

Servers

The following servers support the AOC-UINF-M2 add-on card.

5015M-Ni, 5015M-NT, 5015M-UR, 6015B-NT, 6015B-NTR, 6015B-U, 6015B-UR,

6015C-Ni, 6015C-NTR, 6015C-UR, 6015W-Ni, 6015W-NTR, 6015W-UR, 5025M-

UR, 6025C-UR, 6025W-NTR+, 6025W-UR, 7045A-WT, 1011M-UR, 1011M-Ni and

1021M-UR+

•

AOC-UINF-M2 Add-on Card User's Guide

Notes

vii

Safety Information and Technical Speciﬁcations

Contacting Supermicro

Headquarters

Address: Super Micro Computer, Inc.

980 Rock Ave.

San Jose, CA 95131 U.S.A.

Tel: +1 (408) 503-8000

Fax: +1 (408) 503-8008

Email: [email protected] (General Information)

[email protected] (Technical Support)

Web Site: www.supermicro.com

Europe

Address: Super Micro Computer B.V.

Het Sterrenbeeld 28, 5215 ML

's-Hertogenbosch, The Netherlands

Tel: +31 (0) 73-6400390

Fax: +31 (0) 73-6416525

Email: [email protected] (General Information)

[email protected] (Technical Support)

[email protected] (Customer Support)

Asia-Paciﬁc

Address: Super Micro Computer, Inc.

4F, No. 232-1, Liancheng Rd.

Chung-Ho 235, Taipei County

Taiwan, R.O.C.

Tel: +886-(2) 8226-3990

Fax: +886-(2) 8226-3991

Web Site: www.supermicro.com.tw

Technical Support:

Email: [email protected]

Tel: 886-2-8226-1900

viii

AOC-UINF-M2 Add-on Card User's Guide

Returning Merchandise for Service

A receipt or copy of your invoice marked with the date of purchase is required be-

fore any warranty service will be rendered. You can obtain service by calling your

vendor for a Returned Merchandise Authorization (RMA) number. When returning

to the manufacturer, the RMA number should be prominently displayed on the

outside of the shipping carton, and mailed prepaid or hand-carried. Shipping and

handling charges will be applied for all orders that must be mailed when service

is complete.

For faster service, RMA authorizations may be requested online (http://www.

supermicro.com/support/rma/).

Whenever possible, repack the add-on card in the original Supermicro box, using

the original packaging materials. If these are no longer available, be sure to pack

the add-on card in an anti-static bag and inside the box. Make sure that there is

enough packaging material surrounding the add-on card so that it does not become

damaged during shipping.

This warranty only covers normal consumer use and does not cover damages in-

curred in shipping or from failure due to the alteration, misuse, abuse or improper

maintenance of products.

During the warranty period, contact your distributor ﬁrst for any product problems.

1-1

Safety Information and Technical Speciﬁcations

Chapter 1

Safety Guidelines

To avoid personal injury and property damage, carefully follow all the safety steps

listed below when accessing your system or handling the components.

1-1 ESD Safety Guidelines

Electric Static Discharge (ESD) can damage electronic components. To prevent dam-

age to your system, it is important to handle it very carefully. The following measures

are generally sufﬁcient to protect your equipment from ESD.

Use a grounded wrist strap designed to prevent static discharge.

Touch a grounded metal object before removing a component from the antistatic

bag.

Handle the add-on card by its bracket only; do not touch its components, pe-

ripheral chips or gold contacts.

Put the card and peripherals back into their antistatic bags when not in use.

1-2 General Safety Guidelines

Always disconnect power cables before installing or removing any components

from the computer.

Disconnect the power cable before installing or removing any cables from the

system.

Make sure that the add-on card is securely and properly installed on the moth-

erboard to prevent damage to the system due to power shortage.

•

1-2

AOC-UINF-M2 Add-on Card User's Guide

1-3 An Important Note to Users

All images and layouts shown in this user's guide are based upon the latest PCB

Revision available at the time of publishing. The card you have received may or

may not look exactly the same as the graphics shown in this manual.

•

Table des matières

Autres manuels Supero Carte réseau

Supero

Supero AOC-SG-i2 Manuel utilisateur

Supero

Supero AOC-LPZCR2 Manuel utilisateur

Supero

Supero Supero AOC-SIMLP-3 Manuel utilisateur

Supero

Supero AOC-USAS-H8ir Manuel utilisateur

Supero

Supero AOC-USAS-S8i Manuel utilisateur

Supero

Supero AOC-SIM1U-3B Manuel utilisateur

Supero

Supero AOC-USASLP-L8i Manuel utilisateur

Supero

Supero AOC-USASLP-S8i Manuel utilisateur

Supero

Supero AOC-SAT2-MV8 Manuel utilisateur

Manuels Carte réseau populaires d'autres marques

FirstComm

FirstComm OBiWiFi5G Manuel utilisateur

Sun Microsystems

Sun Microsystems Interface Adapter Manuel utilisateur

TRENDnet

TRENDnet TU2-ETG Manuel utilisateur

YASKAWA

YASKAWA SI-EN3 Manuel utilisateur

Paradyne

Paradyne BitStorm 2600 IP DSLAM Manuel utilisateur

Belkin

Belkin F5D7050 Manuel utilisateur

3Com

3Com EtherLink 3C509B Manuel utilisateur

TRENDnet

TRENDnet TEG-PCITX Manuel utilisateur

Cisco

Cisco MC16E Manuel utilisateur

Delta Electronics

Delta Electronics Braking Modules VFDB Series Manuel utilisateur

TwinMOS

TwinMOS Booming Manuel utilisateur

Dialogic

Dialogic Media Board DM/V1200BTEPEQ Manuel utilisateur

Buffalo

Buffalo AirStation WLI-PCM-L11GP Manuel utilisateur

National Instruments

National Instruments NI 9234 Manuel utilisateur

Hama

Hama 49276 Manuel utilisateur

Linksys

Linksys WCF54G - Wireless-G Compact Flash Card Manuel d'utilisation

Compaq

Compaq Wireless LAN 100 Manuel utilisateur

Bose

Bose PowerMatch Dante Manuel utilisateur