Supermicro AOC-2UR68G4-m2TS Manuel utilisateur

User's Guide
Revision 1.0
AOC-2UR68G4-m2TS

User's Guide Revision 1.0
Release Date: November 18, 2021
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2021 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
The information in this user's guide has been carefully reviewed and is believed to be accurate.
The manufacturer's assumes no responsibility for any inaccuracies that may be contained in this
document, and makes no commitment to update or to keep current the information in this user's
guide, or to notify any person or organization of the updates. Please Note: For the most up-to-date
version of this user's guide, please see our Website at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this user's guide at any time and without notice. This product, including software and
documentation, is the property of Supermicro and/or its licensors, and is supplied only under a
license. Any use or reproduction of this product is not allowed, except as expressly permitted by
the terms of said license.
IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE
USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.
SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED
WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between the manufacturer and the customer shall be governed by the laws of
Santa Clara County in the State of California, USA. The State of California, County of Santa Clara
shall be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for
all claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class A
digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in an industrial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the manufacturer’s instruction manual, may cause harmful interference with
radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case you will be required to correct the interference at your own expense.
WARNING: This product can expose you to chemicals including
lead, known to the State of California to cause cancer and birth
defects or other reproduc�veharm. Formore informa�on, go
to www.P65Warnings.ca.gov.
!

Preface
About this User's Guide
This user's guide is written for system integrators, PC technicians, and
knowledgeable PC users. It provides information for the installation and use of the
AOC-2UR68G4-m2TS add-on card.
About this Add-on Card
The Supermicro AOC-2UR68G4-m2TS is the most advanced networking ultra riser
card in the market. It provides PCI-E Gen. 4 expansion slots for the latest Gen. 4
PCI-E support while also functioning as a networking device that can accommodate
various LAN controllers. The AOC-2UR68G4-m2TS has two 25GbE ports based on
Mellanox ConnectX-6 LX and three PCIe Gen. 4 slots which oers the exibility for
diverse Supermicro Ultra system congurations.
An Important Note to the User
All images and layouts shown in this user's guide are based upon the latest PCB
Revision available at the time of publishing. The card you have received may or
may not look exactly the same as the graphics shown in this user's guide.
Returning Merchandise for Service
A receipt or copy of your invoice marked with the date of purchase is required before
any warranty service will be rendered. You can obtain service by calling your ven-
dor for a Returned Merchandise Authorization (RMA) number. When returning the
motherboard to the manufacturer, the RMA number should be prominently displayed
on the outside of the shipping carton, and the shipping package is mailed prepaid
or hand-carried. Shipping and handling charges will be applied for all orders that
must be mailed when service is complete. For faster service, You can also request
a RMA authorization online (http://www.supermicro.com/RmaForm/).
This warranty only covers normal consumer use and does not cover damages in-
curred in shipping or from failure due to the alternation, misuse, abuse or improper
maintenance of products.
During the warranty period, contact your distributor rst for any product problems.
Preface
iii

iv
Super AOC-2UR68G4-m2TS Add-on Card User's Guide
Conventions Used in the User's Guide
Pay special attention to the following symbols for proper system installation and to
prevent damage to the system or injury to yourself:
Warning: Important information given to ensure proper system installation
or to prevent damage to the components or injury to yourself.
Note: Additional information given to dierentiate between various models
or provides information for correct system setup.
Naming Convention

v
Preface
Contacting Supermicro
Headquarters
Address: Super Micro Computer, Inc.
980 Rock Ave.
San Jose, CA 95131 U.S.A.
Tel: +1 (408) 503-8000
Fax: +1 (408) 503-8008
Email: [email protected] (General Information)
Website: www.supermicro.com
Europe
Address: Super Micro Computer B.V.
Het Sterrenbeeld 28, 5215 ML
's-Hertogenbosch, The Netherlands
Tel: +31 (0) 73-6400390
Fax: +31 (0) 73-6416525
Email: [email protected] (General Information)
Website: www.supermicro.nl
Asia-Pacic
Address: Super Micro Computer, Inc.
3F, No. 150, Jian 1st Rd.
Zhonghe Dist., New Taipei City 235
Taiwan (R.O.C)
Tel: +886-(2) 8226-3990
Fax: +886-(2) 8226-3992
Website: www.supermicro.com.tw

Super AOC-2UR68G4-m2TS Add-on Card User's Guide
vi
Table of Contents
Preface
Chapter 1 Overview
1-1 Overview ......................................................................................................... 1-1
1-2 Key Features................................................................................................... 1-1
1-3 Specications .................................................................................................. 1-2
Chapter 2 Hardware Components
2-1 Add-On Card Image and Layout..................................................................... 2-1
2-2 Major Components.......................................................................................... 2-3
2-3 Ports................................................................................................................ 2-4
2-4 Connectors ...................................................................................................... 2-4
2-5 Jumpers........................................................................................................... 2-5
Chapter 3 Installation
3-1 Static-Sensitive Devices.................................................................................. 3-1
3-2 Before Installation ........................................................................................... 3-2
3-3 Installing the Add-on Card .............................................................................. 3-2
3-4 Installing Drivers for Windows ........................................................................ 3-3
3-5 Installing Drivers (for Mellanox®ConnectX-6)................................................. 3-4

Chapter 1: Overview
1-1
Chapter 1
Overview
1-1 Overview
Congratulations on purchasing your add-on card from an acknowledged leader in
the industry. Supermicro products are designed with the utmost attention to detail
to provide you with the highest standards in quality and performance. For product
support and updates, please refer to our website at http://www.supermicro.com/
products/nfo/networking.cfm#adapter.
1-2 Key Features
The key features of this add-on card include the following:
• 2U networking ultra riser cards for 2U Ultra systems
• Mellanox®ConnectX-6 LX 25GbE controller
• Dual SFP28 connectors
• One PCIe Gen 4 x8 (in x16) slot
• One PCIe Gen 4 x16 slot
• One internal PCIe Gen 4 x8 (in x16) slot
• RDMA over Converged Ethernet
• Network Virtualization: VXLAN and NVGRE
• Thermal sensor support
• NC-SI for remote management

1-2
Super AOC-2UR68G4-m2TS Add-on Card User's Guide
1-3 Specications
General
• 2U networking ultra riser for 2U Ultra systems
• Mellanox®ConnectX-6 LX 25GbE controller
• Dual SFP28 connectors
• One PCIe Gen 4 x8 (in x16) slot
• One PCIe Gen 4 x16 slot
• One internal PCIe Gen 4 x8 (in x16) slot
Storage Accelerations
• NVMe over Fabric ooads for target
• Storage protocols: iSER, NFSoRDMA,
• SMB Direct, NVMe-oF, and more
RDMA over Converged Ethernet
• RoCE v1/v2
• Zero-Touch RoCE: no ECN, no PFC
• RoCE over overlay networks
• IPsec over RoCE
• Selective repeat
• GPUDirect®
• Dynamically Connected Transport (DCT)
• Burst buer ooad

Chapter 1: Overview
1-3
Management Features
• SMBus 2.0
• Network Controller Sideband Interface (NC-SI)
• NC-SI, MCTP over SMBus, and MCTP over PCIe - Baseboard Management
• Controller interface
• PLDM for Monitor and Control DSP0248
• PLDM for Firmware Update DSP026
Remote Boot
• Remote boot over Ethernet
• Remote boot over iSCSI
• UEFI support for x86 and Arm servers
• PXE boot
Standards
• IEEE 802.3ae 10 Gigabit Ethernet
• IEEE 802.3by 25G supporting all FEC modes
• IEEE 802.3ad, 802.1AX Link Aggregation
• IEEE 802.3az Energy Ecient Ethernet (supports only “Fast-Wake” mode)
• IEEE 802.3ap based auto-negotiation and KR startup
• IEEE 802.1Q, 802.1P VLAN tags and priority
• IEEE 802.1Qaz (ETS)

1-4
Super AOC-2UR68G4-m2TS Add-on Card User's Guide
• IEEE 802.1Qbb (PFC)
• IEEE 802.1Qbg
• IEEE 1588v2
• IEEE 1149.1 and IEEE 1149.6 JTAG
• PCI Express Gen 3.0 and 4.0
Power Consumption
• Maximum power consumption: 15W (+75W for each PCIe slot if used)
Operating Conditions
• Storage condition: -40°C to 70°C (-40°F to 158°F)
• Storage humidity: 90% non-condensing relative humidity at 35°C
Supported Platforms
• Supermicro®Ultra systems
Table des matières
Autres manuels Supermicro Contrôleurs

Supermicro
Supermicro AOC-STGS-i1T Manuel utilisateur

Supermicro
Supermicro AOC-S3616L-L16iT Manuel utilisateur

Supermicro
Supermicro AOC-MHIBF-m2Q2G Manuel utilisateur

Supermicro
Supermicro AOC-MTG-i2T Manuel utilisateur

Supermicro
Supermicro AOC-S3908L-H8iR Manuel utilisateur

Supermicro
Supermicro AOC-S25G-m2S Manuel utilisateur

Supermicro
Supermicro AOC-M25G-i2S Manuel utilisateur

Supermicro
Supermicro AOC-M25G-m4S Manuel utilisateur

Supermicro
Supermicro AOC-S3216L-L16iT Manuel utilisateur

















