Super Vac 724BCB Manuel utilisateur

VENTILATOR USER GUIDE MODEL 724BCB

BRAKE COOLING FAN

724BCB User Guide Revised 1-2018

USER GUIDE

This manual covers the description, cautions, operation, and maintenance of the Super Vac

724BCB.

Please take the time to read this manual before operating the fan.

Save this guide for future reference.

CONTENTS

1. BREAKAGE OR DAMAGE DURING SHIPMENT ......................................................................................................................................................................

2. GENERAL DESCRIPTION AND SPECIFICATIONS. .............................................................................................................................................3

3. PRODUCT SAFETY PRECAUTIONS. ........................................................................................................................................................................3

4. BEFORE OPERATING VENTILATOR .......................................................................................................................................................................4

5. OPERATION. .................................................................................................................................................................................................................................

6. CHARGING THE BATTERY PACK.............................................................................................................................................................................................................. 5

7. MAINTENANCE AND REPAIR ........................................................................................................................................................................................................

8. WARRANTY .............................................................................................................................................................................................................................................................. 6

9. CONTACT INFORMATION. ..........................................................................................................................................................................................7

10. PARTS LIST ............................................................................................................................................................................................................................................................. 8

11. EXPLODED VIEW ............................................................................................................................................................................................................................................................... 9

12. LIFT ASSEMBLY ..................................................................................................................................................................................................................................................

BRAKE COOLING FAN

724BCB User Guide Revised 1-2018

1. Breakage or Damage During Shipment

The transportation company is fully responsible for all shipping damage and will resolve problems promptly if you handle it

correctly. Please read these instructions carefully.

Examine the contents of all shipping cases. If you find any damage, call your transportation agent at once and have them make a

description on the freight or express bill describing the damage and the number of pieces. Then write us and we will send you the

original bill of lading. Get a claim blank from the express or truck company. Fill the claim form out. Attach the claim blank to the

original bill

of lading together with a copy of our invoice. Attach a memo on which you show the value of the damaged goods. Mail or

hand these papers to your local transportation agent. They will process your claim with reasonable promptness.

Please note, we cannot and will not enter claims for damages. If we filed claim here, it would be sent to your local freight

agent for verification and investigation. This time can be saved by your filing the claim directly. Every consignee is on the

ground floor and in contact with the local agent who inspects the damaged goods, and thus, each claim can be given

individual attention.

Since our goods are packed to comply with the regulations of all railroad, truck, and express companies, we cannot allow deduction

from any invoice because of any damage, however, be sure to file your claim promptly. Our goods are sold F.O.B. factory. We take

receipt from the transportation company certifying that the goods were delivered to them in good order, and our responsibility

ceases.

It is seldom that any breakage or damage occurs in any of our shipments, and in no case will the customer be out any

expense if they follow the above instructions.

Be sure to keep all damaged goods subject to examination of the truck or express company inspector, who may call on you

some time later. These damaged goods, of course, will belong to them, and they will inform you what to do with them. If you

dispose of these damaged goods, your claim may not be paid.

BRAKE COOLING FAN

724BCB User Guide Revised 1-2018

2. General Description and Specifications

Super Vac ventilators are specifically designed to provide a convenient and portable source of air.

Model

RPM Voltage Motor HxWxD Weight

724BCB 2500 24 V DC,

115/230V AC

Totally Enclosed Air Over ( TEAO)

35” x 22” x

28.75”

108 lb

139 lb with

battery

This ventilator is designed for high powered air movement.

3. Product Safety Precautions

• Do not use the ventilator for purposes other than its intended use.

• Wear eye and ear protection when operating the ventilator.

• Never operate ventilator while fatigued.

• Do not disassemble or modify the ventilator in any way. Doing so may lead to mechanical failure or personal injury.

• Do not wear loose clothing that could become entangled in the operating ventilator.

• Never permit anyone to operate ventilator without proper instruction.

• Do not operate ventilator without proper inlet or outlet guards in place. If guards are missing or damaged, contact

factory for replacements.

• Do not place fingers or other foreign objects through inlet or outlet guards. Should a foreign object enter the ventilator,

immediately stop motor. Be certain all mechanical motion has stopped. Disconnect battery plug wire from IonPac2.0 before

removing foreign object.

• Do not use with any power voltage other than the indicated voltage.

• Never handle energized power cords with wet hands.

• Do not place or operate ventilator on unsteady tables, slanted surfaces or other unstable surfaces. Never use this

ventilator in any explosive environment.

• Never let extension cords or plug connection lay in water. Locate the ventilator so that it cannot fall into water inadvertently.

BRAKE COOLING FAN

724BCB User Guide Revised 1-2018

4. Before Operating Ventilator

• Always operate/charge this ventilator with a proper portable DC (supplied with unit) or 115/230V, 60 & 50 Hertz power source.

• Never use power cords with frayed, cut, or brittle insulation.

• A complete inspection of the ventilator should be made prior to operation.

• Inspect power cord plug for sound connections.

• Check all threaded fasteners for proper tightness

• Inspect inlet and outlet guards for damage or missing pieces. Replace damaged or missing guards before operating ventilator.

5. Operation

Check ventilator inlet and outlet guards for obstructions. Check

and remove from immediate surrounding area any objects that

could be drawn into the ventilator intake.

Place ventilator in desired location before connecting battery

pack. Use caution not to direct toxic fumes into confined spaces

with the ventilator. Please refer to the Super Vac Training Manual

for Smoke Ventilation for comprehensive instruction on effective

ventilation practices.

Move power switch located on battery pack to the desired speed

to begin ventilation. To stop ventilation, move power switch to

the off position.

BRAKE COOLING FAN

724BCB User Guide Revised 1-2018

6. Charging the Battery Pack

The battery pack contains a 24V lithium Ion battery. Total discharging of the batteries is not required as a maintenance

procedure. To restore battery charge –

• Insert extension cord from battery charger into charging plug on battery pack.

• Plug battery charger into appropriate AC power supply

The charger will progressively recharge the batteries from the discharged state. After 5 hours the batteries will be

restored to 100% of total capacity.

Battery can be charged with fan is still in use with AC power.

7. Maintenance and Repair

Maintenance should only be performed by experienced and trained personnel.

Be sure the ventilator is disconnected from the power source before performing any maintenance or repair. The motor is of

heavy-duty ball bearing construction. The unit is completely sealed and requires no lubrication for the life of the motor.

The ventilator blade should be specially checked for build-up of material or dirt which may cause an imbalance. Excessive

imbalance can lead to accelerated wear on motor bearings and vibration. Remove ventilator guards. Clean blade and inside

housing with mild detergent and water. Do not use abrasives, sharp instruments or caustic solvents that may scratch or damage

the aluminum alloy blade.

Intake and exhaust guards are not interchangeable. When replacing guards after cleaning, position them with

the rings to the outside with the row of spot welds holding the rings on the bottom.

BRAKE COOLING FAN

724BCB User Guide Revised 1-2018

8. Warranty

Super Vacuum Manufacturing Company warrants that the equipment is free from defects in materials and workmanship when

used and operated for a period of five years. The responsibility of Super Vacuum Manufacturing Company under this limited

warranty is limited to the repair and replacement of any parts which are found defective and which are returned to Super

Vacuum Manufacturing Company at 3842 Redman Dr, Fort Collins, CO 80524 with transportation charges prepaid (C.O.D.

shipments will not be accepted).

Prior to returning defective parts to SUPER VACUUM MANUFACTURING COMPANY, the original purchaser shall make a claim in

writing to SUPER VACUUM MANUFACTURING COMPANY at the above address indicating the model number and type of defect. No

parts or equipment will be received by SUPER VACUUM MANUFACTURING COMPANY for repair or replacement under this warranty

without specific written authority from it in advance.

Any parts damaged by improper installation, overloading, abuse or accident of any type or cause are not covered by this warranty.

All equipment manufactured by us is pre-run and tested before leaving our plant and is shipped in good working order and condition.

We therefore extend to the original purchasers the following Limited Warranty for the period of five years from the original date of

purchase:

This warranty does not apply to defects caused by accident, misuse, neglect, or wear and tear, nor can we be held

responsible for incidental and consequential expense and loss, nor does this warranty apply to equipment where

alterations have been executed without our knowledge or consent. These conditions are readily discernible when the

equipment is returned to us for inspection.

On all component parts not manufactured by SUPER VACUUM MANUFACTURING COMPANY, their warranty is to the extent

that the manufacturer of such component warrants them to SUPER VACUUM MANUFACTURING COMPANY, if at all. Look in

your local business phone directory for the nearest repair station for the brand of parts you have or write to us for the

address.

If equipment received is found to have been damaged in transit, a claim should be made against the carrier within three

days, as we assume no responsibility for such damage.

Any service other than our Authorized Service voids this warranty.

This warranty is in lieu of and is intended to exclude all other warranties, express or implied, oral or written, including any

warranties of MERCHANTABILITY or FITNESS for a particular purpose.

BRAKE COOLING FAN

724BCB User Guide Revised 1-2018

9. Contact Information

For parts or service information, contact:

Super Vacuum Manufacturing Company, Inc.

3842 Redman Dr.

Fort Collins, CO 80524

Phone: 800-525-5224

970-297-7100

Fax: 970-297-7099

Email : info@supervac.com

Internet: www.supervac.com

BRAKE COOLING FAN

8 724BCB User Guide Revised 1-2018

10. Parts List

PARTS LIST

ITEM

QTY

PART NUMBER

DESCRIPTION

018-15049

FRAME, 724BCB

018-15050

LIFT MECHANISM

008-13373

WHEEL PNEUMATIC DW414 3" HUB CENTER

021-14922

MOTOR FOR 724BCB 1HP TEFC BI-DIR

019-10461

724 HANDLE PAINTED

INTAKE PLENUM

003-14150

BLADE, INLET CONE, PB831 #C-TO-ICP280

012-14143

GUARD, 724BCB FRONT-PAINTED

003-14149

BLADE, PROPELLER, #C-T2-TAL280-1R PB831

018-14028

SHROUD, 724BCB, W/GUARD, PAINTED

032-10734

SCREW,HH,1/4-20x3/4,SS

032-10752

WASHER,FLAT,SAE, 1/4", SS

032-10778

SCREW,HH,5/16-24x1-3/4,SS

032-10786

WASHER,FLAT,USS, 5/16", SS

034-11057

NUT,NYLOCK, 5/16-18 UNC,SS

032-13864

SCREW,HH,1/2-20x3-1/2,SS

032-18804

WASHER,FLAT,USS, 1/2", SS

032-18802

NUT,NYLOCK, 1/2-13 UNC,SS

032-15464

SCREW,HH,3/8-16x3,SS

032-11129

WASHER,FLAT,SAE, 3/8", SS

034-11073

NUT,NYLOCK, 3/8-16 UNC,SS

024-13473

FEET RUBBER CONE SHAPE VBM-4002

032-10769

SCREW,HH,5/16-18x1-1/4,SS

032-10786

WASHER,FLAT,SAE, 5/16", SS

008-10190

PLUG, FINISHING, 1 1/4 SQ, RIBBED, BLACK

008-10189

PLUG, FINISHING SQ RIBBED, BLACK 1"

008-10192

SPRING, A-180-S VALCO

IonPAC2.0

BATTERY PACK - IONPAC2.0

041-11489

EDGE, TRIM SEAL, 3/4 BULB

008-14145

BUSHING,BLADE MAUREY, HQ X 5/8"

008-10193

KEYSTOCK,SHAFT,BLADE,718, V-18

032-10745

SCREW,HH,1/4-20x1,SS

032-10754

WASHER,LOCK,SPRING,REGULAR, 1/4", SS

096-01140

SCREW,HH,M6x1.0x25,SS

034-11028

WASHER,LOCK,SPRING,REGULAR, M6, SS

032-10723

SCREW,PHP,1/4-20 UNCx0.5

025-10544

DECAL - CAUTION GUARDS REMOVED

025-10578

DECAL - 724BCB YELLOW SAFETY

025-13426

DECAL SUPER VAC VERTICAL LETTER

025-10577

DECAL - 724BCB SERIAL NUMBER

Table des matières

Autres manuels Super Vac Ventilateur

Super Vac

Super Vac V20-BK Feuille d'instructions

Super Vac

Super Vac 730WT Manuel utilisateur

Super Vac

Super Vac V16-BW Manuel utilisateur

Super Vac

Super Vac 720-EXP Manuel utilisateur

Super Vac

Super Vac V16-BK Manuel utilisateur

Super Vac

Super Vac 716GC Manuel utilisateur

Super Vac

Super Vac 724EXP Manuel utilisateur

Super Vac

Super Vac F200Ei Feuille d'instructions

Super Vac

Super Vac 718GC Manuel utilisateur

Super Vac

Super Vac 724-EVS Manuel utilisateur

Super Vac

Super Vac 716WT Manuel utilisateur

Super Vac

Super Vac 720GG Manuel utilisateur

Super Vac

Super Vac V20-GB Manuel utilisateur

Super Vac

Super Vac SVU-50 Manuel utilisateur

Super Vac

Super Vac V18-BW Manuel utilisateur

Super Vac

Super Vac V20-EV Manuel utilisateur

Super Vac

Super Vac F200i Manuel utilisateur

Super Vac

Super Vac 718G4T Manuel utilisateur

Super Vac

Super Vac V20-BD Manuel utilisateur

Super Vac

Super Vac V18-ES Manuel utilisateur

Super Vac

Super Vac 724BCG-H Manuel utilisateur

Super Vac

Super Vac V16-BL Manuel utilisateur

Super Vac

Super Vac F244i Manuel utilisateur

Super Vac

Super Vac V20-BL Manuel utilisateur

Manuels Ventilateur populaires d'autres marques

ELTA FANS

ELTA FANS H03VV-F Manuel utilisateur

Hunter

Hunter 20714 Manuel d'instructions

Emerson

Emerson CARRERA VERANDA CF542ORB00 Manuel utilisateur

Hunter

Hunter Caraway Manuel d'instructions

Panasonic

Panasonic FV-15NLFS1 Manuel utilisateur

Kompernass

Kompernass KH 1150 Manuel utilisateur

VES

VES FALA100/12V/TR Manuel utilisateur

Vertiv

Vertiv Liebert DCD Manuel utilisateur

Westinghouse

Westinghouse GFP Series Manuel utilisateur

Venmar

Venmar KUBIX HRV PLUS Series Manuel utilisateur

Maico

Maico ECR 31 Manuel utilisateur

Sonnenkonig

Sonnenkonig Dinky Manuel utilisateur

S&P

S&P ECOWATT HXBR Manuel utilisateur

Wider

Wider IMP03369BH Manuel utilisateur

Panasonic

Panasonic F-60DHN Manuel utilisateur

Hinkley

Hinkley HIGHLAND Manuel utilisateur

Broan

Broan 766BN Manuel utilisateur

Premium

Premium PFS16022 Instructions de montage