Oct/02 2 MNPL23050001
Overview
The USB to Parallel Cable provides bi-directional connectivity between any standard IEEE-1284 compliant parallel port devices and
the Universal Serial Bus (USB) interface. Software drivers are also provided to create a seamless migration path from traditional
parallel port to the USB environment. With 512 bytes of unified data buffer, it is capable of providing maximum throughput for both
upstream and downstream data transfer for a wide variety of devices. The IEEE-1284 interface is robust enough to handle various
not-so-compliant parallel port implementation.
Features
yConnectors: 1 x USB Type A Connector
1 x Centronics 36-pin Male Connector
yLength: 1.5m (end-to-end)
yBandwidth: 1.216Mbps (ECP mode) transfer rate
yFully compliant with Universal Serial Bus Specification Version 1.1
ySupports IEEE-1284 (bi-directional parallel interface) specification
ySupports Windows 98SE, Windows ME, Windows 2000 & Windows XP
Driver Installation
Windows ME
1. Turn on your computer. Plug the USB to Serial
Cable to any USB port in your computer. Windows
will then detect a USB device.
Select “Automatic search for a better driver
(Recommended)” and click “Next” to continue.
2. Select “Specify a location:” and enter the path of the
driver
“E:\USBLPT\ME”.
Click “Next” to continue.
