Sunny SF-E3889 SMART Manuel utilisateur

SMART ELLIPTICAL MACHINE

SF-E3889 SMART

USER MANUAL

IMPORTANT! Please retain owner’s manual for maintenance and adjustment instructions. Your

satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE CONTACTED

US: [email protected] or 1-877-90SUNNY (877-907-8669).

IMPORTANT SAFETY INFORMATION

We thank you for choosing our product. To ensure your safety and health, please use this

equipment correctly. It is important to read this entire manual before assembling and using the

equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained

and used properly. It is your responsibility to ensure that all users of the equipment are informed of

all warnings and precautions.

1. Before starting any exercise program, you should consult your physician to determine if you

have any medical or physical conditions that could put your health and safety at risk, or prevent

you from using the equipment properly. Your physician’s advice is essential if you are taking

medication that affects your heart rate, blood pressure or cholesterol level.

2. Be aware of your body’s signals. Incorrect or excessive exercise can damage your health. Stop

exercising if you experience any of the following symptoms: pain, tightness in your chest,

irregular heartbeat, shortness of breath, lightheadedness, dizziness or feelings of nausea. If you

do experience any of these conditions, you should consult your physician before continuing with

your exercise program.

3. Keep children and pets away from the equipment. The equipment is designed for adult use only.

4. Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet.

To ensure safety, the equipment should have at least 2 feet (60 CM) of free space all around it.

5. Ensure that all nuts and bolts are securely tightened before using the equipment. The safety of

the equipment can only be maintained if it is regularly examined for damage and/or wear and

tear.

6. Always use the equipment as indicated. If you find any defective components while assembling

or checking the equipment, or if you hear any unusual noises coming from the equipment during

exercise, discontinue use of the equipment immediately and do not use until the problem has

been rectified.

7. Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may

become entangled in the equipment.

8. Do not place fingers or objects into the moving parts of the equipment.

9. The maximum weight capacity of this unit is 265 pounds (120 KG).

10.The equipment is not suitable for therapeutic use.

11.To avoid bodily injury and/or damage to the product or property, proper lifting and moving is

required.

12.Your product is intended for use in cool, dry conditions. You should avoid storage in extreme

cold, hot or damp areas as this may lead to corrosion and other related problems.

13.This equipment is designed for indoor and home use only. It is not intended for commercial use!

PRE-ASSEMBLY CHECK LIST

Before you start to assemble, please make sure all parts are included.

No.

Description

Spec.

Qty.

No.

Description

Spec.

Qty.

Main Frame

51L/R

Cover for Left Swing

Bar

1 PR.

Handlebar Post

Roller Cover

Rail Frame

54L/R

Pedal

1 PR.

Front Stabilizer

Nut Cap

S13

5L/R

Swing Bar

1 PR.

Meter

Fixed Handlebar

Adaptor

9L/R

Pedal Arm

1 PR.

78L/R

Cover for Right

Swing Bar

1 PR.

11L/R

Handlebar

1 PR.

Hardware Package

Bottle Holder

Manual

Long Axle

Thank You Card

Mast Cover

HARDWARE PACKAGE

Ordering Replacement Parts (U.S. and Canadian Customers only)

Please provide the following information in order for us to accurately identify the part(s) needed:

✓The model number (found on cover of manual)

✓The product name (found on cover of manual)

✓The part number found on the “EXPLODED DIAGRAM” and “PARTS LIST” (found near the end

of the manual)

Please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-8669).

ASSEMBLY INSTRUCTION

We value your experience using Sunny Health and Fitness products. For assistance with parts or

troubleshooting, please contact us at [email protected] or 1-877-90SUNNY

(877-907-8669).

STEP 1:

Remove the 2 Shipping Tubes (No. D),

8 Allen Bolts (No. 15), 8 Flat Washers

(No. 30)and 8 Spring Washers (No.

36) from the Main Frame (No. 1) by

Allen Wrench (No. 117).

Attach the Front Stabilizer (No. 4) and

Rail Frame (No. 3) onto the Main

Frame (No. 1) using 8 Allen Bolts (No.

15), 8 Flat Washers (No. 30), 8 Spring

Washers (No. 36) that were removed.

Tighten and secured with the Allen

Wrench (No. 117).

NOTE: You may discard 2 Shipping

Tubes (No. D) or save them to

repackage the item in the future.

We value your experience using Sunny Health and Fitness products. For assistance with parts or

troubleshooting, please contact us at [email protected] or 1-877-90SUNNY

(877-907-8669).

STEP 2:

Remove 6 Allen Bolts (No. 15), 6

Spring Washers (No. 36)and 6 Arc

Washers (No. 35)from the Main Frame

(No. 1).

Slide the Mast Cover (No. 50)onto the

Handlebar Post (No. 2).

Connect the Sensor Extension Wire 2

(No. 70) with the Sensor Extension

Wire 1 (No. 69).

NOTE: To avoid damaging the wires,

please put them into the Handlebar Post

(No. 2) before attaching the Handlebar

Post (No. 2) onto the Main Frame (No.

1).

Insert the Handlebar Post (No. 2) onto

the post of the Main Frame (No. 1),

secure in place with 6 Allen Bolts (No.

15), 6 Spring Washers (No. 36)and 6

Arc Washers (No. 35) that were

removed. Tighten and secured with the

Allen Wrench (No. 117).

NOTE: Please make sure to attach the

Handlebar Post (No. 2) onto the post of

the Main Frame (No. 1) straightly.

Slide down the Mast Cover (No. 50)and

fit in place.

Remove 2 Allen Bolts (No. 15), 2

Spring Washers (No. 36)and 2 Arc

Washers (No. 35) from the Handlebar

Post (No. 2) by Allen Wrench (No. 117).

Attach the Fixed Handlebar (No. 6) to

the Handlebar Post (No. 2) in place.

Secure it with 2Allen Bolts (No. 15), 2

Spring Washers (No. 36)and 2 Arc

Washers (No. 35) that were removed by

Allen Wrench (No. 117).

We value your experience using Sunny Health and Fitness products. For assistance with parts or

troubleshooting, please contact us at [email protected] or 1-877-90SUNNY

(877-907-8669).

STEP 3:

Remove 2 Hex Bolts (No. 17),2

Spring Washers (No. 36),2Flat

Washers (No. 32)and 2Wave

Washers (No. 73)from the Long Axle

(No. 46).

Insert the Long Axle (No. 46)into the

Handlebar Post (No. 2), then insert 2

Wave Washers (No. 73)that were

removed to the both sides of Long Axle

(No. 46).

Attach the 2 Swing Bars (No. 5L/R) to

the both sides of the Long Axle (No.

46)using 2Flat Washers (No. 32), 2

Spring Washers (No. 36)and 2 Hex

Bolts (No. 17)that were removed.

Tighten with Spanner (No. 116) and

Spanner (No. 118).

NOTE: Do not tighten the Hex Bolts

(No. 17) during this step.

We value your experience using Sunny Health and Fitness products. For assistance with parts or

troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY

(877-907-8669).

STEP 4:

Attach the 2 Pedal Arms (No. 9L/R) to

2 Roller Arms (No. 7) with 2 Pedal

Hinge Bolts (No. 21), then put on 2

Flat Washers (No. 34) and 2 Nylon

Nuts (No. 22)to the end of 2 Pedal

Hinge Bolts (No. 21)by Allen Wrench

(No. 119) and Spanner (No. 115).

NOTE: Do not tighten the Pedal Hinge

Bolts (No. 21) during this step.

Attach 2 Pedal Arms (No. 9L/R) to 2

Swing Bars (No. 5L/R) respectively

with 2 Allen Bolts (No. 13) and 2 Flat

Washers (No. 30), then put on 2 Flat

Washers (No. 30) and 2Nylon Nuts

(No. 24) by Allen Wrench (No. 117)

and Spanner (No. 118).

NOTE: Do not tighten the Allen Bolts

(No. 13) during this step.

Attach 2 Pedals (No. 54L/R) to the

Pedal Arms (No. 9L/R) using 8 Phillips

Screws (No. 18) by Spanner (No. 116).

NOTE: Both Pedals (No. 54L/R) are

labeled: L for LEFT and R for RIGHT.

Now you can tighten Hex Bolts (No.

17) from STEP 3 by Spanner (No. 116)

and Spanner (No. 118).

Cover with the 2 Nut Caps (No. 55).

And then tighten and secured 2 Pedal

Hinge Bolts (No. 21)and 2 Nylon Nuts

(No. 22)by Allen Wrench (No. 119)

and Spanner (No. 115).

NOTE:Ensure that all bolts and

washers are in place and now you can

tighten Allen Bolts (No. 13) by Allen

Wrench (No. 117) and Spanner (No.

118).

We value your experience using Sunny Health and Fitness products. For assistance with parts or

troubleshooting, please contact us at [email protected] or 1-877-90SUNNY

(877-907-8669).

STEP 5:

Attach the 2 Handlebars (No. 11L/R) to

2 Swing Bars (No. 5L/R) respectively

with 4 Carriage Bolts (No. 12), 4 Arc

Washers (No. 35)and 4 Cap Nuts (No.

77) by Spanner (No. 116).

Remove 4 Phillips Tapping Screws

(No. 27)from 2 Cover for Left Swing

Bar (No. 51L/R) and 2 Cover for Right

Swing Bar (No. 78L/R) respectively by

Spanner (No. 116).

Remove 2 Phillips Tapping Screws

(No. 26)from 2 Swing Bars (No. 5L/R)

by Spanner (No. 116). Then attach 2

Cover for Left Swing Bar (No. 51L/R)

and 2 Cover for Right Swing Bar (No.

78L/R) to 2 Swing Bars (No. 5L/R)

respectively with 4 Phillips Tapping

Screws (No. 27)and 2 Phillips

Tapping Screws (No. 26) that were

removed. Tighten and secured with

Spanner (No. 116).

NOTE: Both Cover for Left Swing Bar

(No. 51L/R) and Cover for Right

Swing Bar (No. 78L/R) are labeled: L

for LEFT and R for RIGHT.

Remove 2 Phillips Tapping Screws

(No. 26)from 2 Roller Arms (No. 7) by

Spanner (No. 116). Then attach 2

Roller Covers (No. 52) to 2 Roller

Arms (No. 7) respectively with 2

Phillips Tapping Screws (No. 26) that

were removed. Tighten and secured

with Spanner (No. 116).

We value your experience using Sunny Health and Fitness products. For assistance with parts or

troubleshooting, please contact us at [email protected] or 1-877-90SUNNY

(877-907-8669).

STEP 6:

Remove 4 Phillips Screws (No. 74)

from the Meter (No. 68) by Spanner

(No. 116).

Plug the Pulse Wire (No. 72) to the

designed socket at back of the Meter

(No. 68). Then Connect the Sensor

Extension Wire 2 (No. 70)with Meter

Wire A (No. 68a).

Attach the Meter (No. 68) to the bracket

of Handlebar Post (No. 2) with 4

Phillips Screws (No. 74)that were

removed. Tighten and secured with

Spanner (No. 116).

NOTE: To avoid damaging the wires,

please put them into the Handlebar

Post (No. 2) before attaching the Meter

(No. 68) onto the bracket.

Remove 2 Phillips Screws (No. 25)

and 2 Flat Washers (No. 28) from the

Handlebar Post (No. 2) by Spanner

(No. 116). Then attach the Bottle

Holder (No. 41) to the Handlebar Post

(No. 2) with 2Phillips Screws (No. 25)

and 2 Flat Washers (No. 28) that were

removed. Tighten and secured with

Spanner (No. 116).

Insert the jack from Adaptor (No. 71) to

adaptor input on the front of Main

Frame (No. 1), then plug the Adaptor

(No. 71)into an outlet.

The assembly is complete!

Table des matières

Autres manuels Sunny vélo elliptique

Manuels vélo elliptique populaires d'autres marques

Weslo

Weslo Momentum 4.0 Elliptical Manuel d'utilisation et d'entretien

Progear Fitness

Progear Fitness Air elliptical pro 1307 Manuel utilisateur

Torque Fitness

Torque Fitness XPLLP Manuel utilisateur

Octane Fitness

Octane Fitness PRO3700C Manuel utilisateur

Xterra

Xterra FS5.8e Manuel utilisateur

Bodyguard

Bodyguard E-40 Manuel utilisateur

Bonn Germany

Bonn Germany Concept 2.2 Manuel utilisateur

Precor

Precor Resolute RSL 620 Manuel utilisateur

NordicTrack

NordicTrack E 9.2 Elliptical Manuel utilisateur

Vision Fitness

Vision Fitness X6600iNetTV Manuel utilisateur

Matrix

Matrix MX-A5x Manuel utilisateur

SportsArt Fitness

SportsArt Fitness ECO-NATURAL Elite E874 Manuel utilisateur

Sears

Sears FREE SPIRIT C249 30737 0 Manuel utilisateur

True

True FS-64 Manuel utilisateur

Sport-thieme

Sport-thieme ST 310 Manuel utilisateur

VIRTUFIT

VIRTUFIT CTR 1.1 Manuel utilisateur

Kettler

Kettler GIRO C 1 Manuel utilisateur

CIRCLE FITNESS

CIRCLE FITNESS E7 Manuel utilisateur