Sunjoy SR-4DSN Manuel utilisateur
Electric Heating Panel
Specification & Installation
Matters to be Attended to Use
Product Description
Instructions
● When the elecricity is applied to the product, the heating plate
will heat up and start to generate heat as a form of far-infrared
wave (frequency range from 4
to 14μm with 9μm on average),
which will eventually warm up
human bodies as well as the
surrounding atmosphere.
1. Radiant heating is the very same way for the sun to transmit the
heat to the life forms, which makes you feel natural and pleasant.
- Saves energy as heat is directly transmitted to our body and the
heat loss is minimized.
- No dryness as the air is not directly heated up.
- Prevents respiratory diseases as no wind or dust is generated
- Minimizes temperature difference between top and bottom of
the target space compared to the convection heating.
- Allows to heat rooms with high ceiling, which is difficult with
conventional heating systems.
- Feels warm even when the surrounding air is cold unlike the
convection heating.
2. Far-Infrared Heating makes you healthy as well as warm.
- About 60% of energy transmitted from the sun to the earth is
far-infrared.
- Heat from the far-infrared wave penetrates into human body
since its wavelength matches with the resonance frequency of
the body molecules.
- Far-infrared wave activates body cells and increases metabolism.
Surface temperature
from 95 to 125 C
FF
Heating
Element
Heat Insulation
Heating
Surface
Frame
(Aluminium)
Far Infrared
Radiant Material
o
USER’S MANUAL
1
Product Specification
Installation Diagram
ModelNo. Voltage Size [mm]
(L x B x H)
Power
[W]
Weight
[kg]
1
AC
230V
2
3
4
SR-4DSN 606 x 606 x 20 470 2.1
SR-5DSN 606 x 906 x 20 600 3.0
SR-7DSN 606 x 1206 x 20 750 3.9
SR-9DSN 606 x 1506 x 20 950 4.7
L
B
L
Ceiling
H
Distribution
Board
Ceiling tile (Gypsum
Board, Tex)
M - bar
Carrying Channel
HIV 3P-2.5SQ
(CD16mm)
FL ±0.00
Thermostat
(Integrated
sensor) Carrying
Channel
Hanger
M - bar
Ceiling tile
(Gypsum
Board, Tex)
Joint Box
M5 Tapping
Screw
● Please pay attention in using !
- Child or old and feeble person should not use this product
without anybody who can help and monitor to use the device
safely. It is required to observe infants and toddlers not to use
the product incorrectly.
- Do not set the surface of the product.
- Do not touch the surface with hand. It may cause burn.
● Do not block or damage the heating surface. Do not cover the
heating surface with cloth or paper tape. - It may cause to reduce
the radiation rate.
● Do not disassemble and assemble the product without
permission or observation of expert.
- Each connection part should be connected using standard
fittings (compressive sleeve, ring terminal).
Otherwise it may cause accident including electric leakage or fire.
- Heating surface is easily damaged as it is made of soft material.
- It may cause malfunction of the product if it is damaged.
Especially it is dangerous of electric shock if metal material or
conductive material like carbon textile damage the heating
surface and connected with inner heating wire.
● Be careful not to use for too long time at home.
- is energy saving product, however please avoid
using for too long time.
● If there is damage to the power cable, you must contact qualified
electrician to replace it with dedicated power cable from our
authorized dealers.
Far Infrared Ray Radiant Heating Panel
ENERGY KOREA INC.
Address : 91, Haeanbuk-ro, Ganghwa-eup,
Ganghwa-gun, Incheon, 23023, KOREA
Phone : +82-1600-9339 / Fax : +82-32-623-5954
Website : http://www.sunjoy.kr
SR-9DSN
SR-7DSN
SR-5DSN
SR-4DSN
Cautions and Warnings (2)
Cautions and Warnings (1)
● Before using
- Please read the user manual thoroughly before using.
- User should follow the instruction to use the product.
- Following directions will give you safe and correct use
to protect users from dangerous situations which may
cause personal or property damages.
● Negligence
- Though we have tried efforts to make the user manual be correct
and perfect, there may be unexpected error or omission. Our
company is not responsible for the damages occurred by them.
Also Energy Korea Inc., has the right to change the specification
of the product at any time without notification.
- Without prior written consent of Energy Korea Inc., nobody can
store, reorganize, transmit or copy whole or a part of this manual
in any form or way, interpretation in other language or online.
● Customer service : Please contact the company or agency for
more information on the product or after service.
Contact number is on the front cover of this manual.
● When working in wet places such as a bathroom, use extreme
caution not to cause injury or death.
● This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
● Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
● Children aged from 3 years and less than 8 years shall only
switch on/off the appliance provided that it has been placed or
installed in its intended normal operating position and they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children aged from 3 years and less than 8 years shall not plug in,
regulate and clean the appliance or perform user maintenance.
● CAUTION – Some parts of this product can become very hot and
cause burns. Particular attention has to be given where children
and vulnerable people are present.
● Heater is not located immediately below a socket-outlet.
● Instructions for heaters intended to be fixed by screws or other
give details on the method of fixing.
● Instructions for heaters for mounting at high level state that the
heater must be installed at least 2,3 m above the floor.
● Statement for heaters intended to be installed in wardrobes or
ceiling: for proper installation in a wardrobe or in the ceiling.
● Instructions for fixed heaters likely to be used in a bathroom:
that the heater is to be installed so that switches and other
controls cannot be touched by a person in the bath or shower.
● When multiple heating panels are installed, place them at least
1m apart from each other.
● When heating panels are installed near glass walls, place them at
least 2,3m away from the wall to avoid heat loss through the glass.
● Use circuit breakers to connect cables from the heating panels.
● Must use crimp terminals when connecting or terminating cables
used in the installation.
● This symbol on the product, or in its packing,
indicates that this product may not be treated
as household waste. Instead, it should be taken
to the appropriate waste collection point for the
recycling of electronic equipment. By ensuring
this product is disposed of correctly, you will
help prevent potential negative consequences
for the environment and human health, which could otherwise be
caused by the inappropriate waste handling of this product.
For more detailed information about the recycling of this product,
please contact your local council, your household waste disposal
service, or the shop where you purchased the product.
Correct disposal of this product
Electric Heating Panel USER’S MANUAL
2
Wiring Diagram
INPUT OUTPUT
230V AC HEATER
Temperature
Sensor
Thermal
Controller
L N N L
● Please remind that connect the panels under the capacity of panels.
● Please bind firmly when connecting "Input & Output" terminals.
If not, it can cause a short or fire.
● This is heating device, so take care of safety in use and turn off the
breaker in case of not-used or no user.
● In normal installation and using condition, warranty period of the
product is 2 years for panel after purchasing.
● Warranty doesn’t cover the damage or error caused by the
following.
- Errors cause by using in the condition not covered by warranty.
- Error of the product used with unstable voltage which can’t
protect impulse voltage.
- Errors caused by unpermitted assembly and disassembly.
- Errors caused by foreign substance entered into inside of the
product
- Errors caused by reinstallation without observation of expert.
- Damage of the parts of the product due to mistakes of the user.
- Damage of the product due to natural disaster.
Product Warranty
▶ How to connect a power cable ◀
Heating panel Heating panel
1m
Picture of the cables
connected to circuit
breakers in a switch
panel.
Ce manuel convient aux modèles suivants
3
Autres manuels Sunjoy Chauffage
Manuels Chauffage populaires d'autres marques
oventrop
oventrop Regucor Series Manuel utilisateur
Blaze King
Blaze King CLARITY CL2118.IPI.1 Manuel utilisateur
ELMEKO
ELMEKO ML 150 Manuel utilisateur
BN Thermic
BN Thermic 830T Manuel utilisateur
KING
KING K Series Mode d’emploi
Empire Comfort Systems
Empire Comfort Systems RH-50-5 Guide de démarrage rapide
Empire Heating Systems
Empire Heating Systems WCC65 Manuel utilisateur
Wetekom
Wetekom 92 86 43 Manuel utilisateur
Desa
Desa SPC170-F Manuel utilisateur
Watlow
Watlow Watrod Electric Tubular Heaters Manuel utilisateur
Haverland
Haverland ECO-DRY GPS Series Manuel de la liste des pièces
Stelpro
Stelpro ASILVC2060 Series Manuel utilisateur