Sungrow SH5K-20 Mode d’emploi
Sungrow Australia Group Pty. Ltd. | 1800 SUNGROW (786 476)
GD_201904_SH5K-20_Quick Commissioning Guide_V1.0 Page 1 of 10
© Sungrow Australia Group Pty. Ltd. All rights reserved.
As we continuously improving our products, changes to this document may occur without notice.
Commissioning of SH5K-20 Hybrid Inverters
Disclaimer
The material in this document has been prepared by Sungrow Australia Group Pty. Ltd. ABN 76
168 258 679 and is intended as a guideline to assist solar installers for troubleshooting. It is not a
statement or advice on any of the Electrical or Solar Industry standards or guidelines. Please
observe all OH&S regulations when working on Sungrow equipment.
The commissioning phase of the SH5K-20 inverter is straight forward and simple. All
settings are done from the front panel, and there is no longer any need to manually
enter the battery details –the system will automatically detect a powered-up battery.
On first initialisation, the flowing will appear on the LCD screen.
Enter to set/check the country code
Enter “AU” for AS/NZS 4777 as default
Select appropriate DNSP, or manually enter
grid protection parameters (Default DNSP power factor settings will be loaded)
Sungrow Australia Group Pty. Ltd. | 1800 SUNGROW (786 476)
GD_201904_SH5K-20_Quick Commissioning Guide_V1.0 Page 2 of 10
© Sungrow Australia Group Pty. Ltd. All rights reserved.
As we continuously improving our products, changes to this document may occur without notice.
Enter to save
Check / set time and date as required
Incorrect time setting will affect monitoring
Setting the Zero Export
Sungrow Australia Group Pty. Ltd. | 1800 SUNGROW (786 476)
GD_201904_SH5K-20_Quick Commissioning Guide_V1.0 Page 3 of 10
© Sungrow Australia Group Pty. Ltd. All rights reserved.
As we continuously improving our products, changes to this document may occur without notice.
‘ON’ = No power exported. “OFF” = All power
exported. “PARTIAL” = set by watts
Default = Partial 5000 watts
Set Reactive power if required. Note: Grid
settings already have State requirements loaded when DNSP selected.
Set if required
Set battery discharge times (only available if
battery connected)
Sungrow Australia Group Pty. Ltd. | 1800 SUNGROW (786 476)
GD_201904_SH5K-20_Quick Commissioning Guide_V1.0 Page 4 of 10
© Sungrow Australia Group Pty. Ltd. All rights reserved.
As we continuously improving our products, changes to this document may occur without notice.
Weekday and weekend time zones available
Generally, only set if customer is on TOU
metering. Otherwise leave as default.
EPS (Off-Grid) setting only if EPS box
connected and maximum 3 kW output under EPS mode.
Enable and enter
Sungrow Australia Group Pty. Ltd. | 1800 SUNGROW (786 476)
GD_201904_SH5K-20_Quick Commissioning Guide_V1.0 Page 5 of 10
© Sungrow Australia Group Pty. Ltd. All rights reserved.
As we continuously improving our products, changes to this document may occur without notice.
Enter to save
Enter to test Earth Fault alarm
Enter to save and exit
Sungrow Australia Group Pty. Ltd. | 1800 SUNGROW (786 476)
GD_201904_SH5K-20_Quick Commissioning Guide_V1.0 Page 6 of 10
© Sungrow Australia Group Pty. Ltd. All rights reserved.
As we continuously improving our products, changes to this document may occur without notice.
There are a couple of subsequent settings that may be required depending on the
configuration.
If there is an existing PV system on the same phase, it must be enabled in the settings
otherwise some errors (error 084) may occur. This also allows battery charging from
existing system.
Enter
Password = 111 (Enter)
Sungrow Australia Group Pty. Ltd. | 1800 SUNGROW (786 476)
GD_201904_SH5K-20_Quick Commissioning Guide_V1.0 Page 7 of 10
© Sungrow Australia Group Pty. Ltd. All rights reserved.
As we continuously improving our products, changes to this document may occur without notice.
Enter ‘Existing System’
Enable and enter
Enter the AC power of the total inverters on
the same phase only (you can also change the export limit here)
Enter to save
Sungrow Australia Group Pty. Ltd. | 1800 SUNGROW (786 476)
GD_201904_SH5K-20_Quick Commissioning Guide_V1.0 Page 8 of 10
© Sungrow Australia Group Pty. Ltd. All rights reserved.
As we continuously improving our products, changes to this document may occur without notice.
There may also be a requirement from the customer to reserve a set amount of battery
capacityto be available in the eventof a blackout. This willquarantine a pre-set amount
and will take that amount out of the daily cycle capacity. This is only available after
inverter has restarted with battery set.
Enter into settings
Password = 111
Sungrow Australia Group Pty. Ltd. | 1800 SUNGROW (786 476)
GD_201904_SH5K-20_Quick Commissioning Guide_V1.0 Page 9 of 10
© Sungrow Australia Group Pty. Ltd. All rights reserved.
As we continuously improving our products, changes to this document may occur without notice.
EPS setting
Enable
Enter to confirm
Enter desired value, based on a calculation
of total capacity, load, and how long backup is required for.
Enter to save and finish.
Sungrow Australia Group Pty. Ltd. | 1800 SUNGROW (786 476)
GD_201904_SH5K-20_Quick Commissioning Guide_V1.0 Page 10 of 10
© Sungrow Australia Group Pty. Ltd. All rights reserved.
As we continuously improving our products, changes to this document may occur without notice.
Once the commissioning is completed, please follow the below checklists to test the
system.
1. The inverter only shows green light ON and status shows Running; if the
existing solar power is sufficient, the system should charge the battery.
2. Turn more house load ON to see whether the battery discharges.
3. If the EPS box (or backup) is installed, turn off the grid supply main to test
the Off-grid function; if the function is OK and then turn the grid supply main
to ON.
4. After completing these testing, the system should run OK.
For any assistance, please contact Sungrow Service Department on 1800 786 476.
Autres manuels pour SH5K-20
3
Autres manuels Sungrow Onduleur
Sungrow
Sungrow SG2K-S Manuel utilisateur
Sungrow
Sungrow SG3KTL-EC Manuel utilisateur
Sungrow
Sungrow SH3K6-30 Manuel utilisateur
Sungrow
Sungrow SG5.0RT Manuel utilisateur
Sungrow
Sungrow SG30 33 40 50CX Manuel utilisateur
Sungrow
Sungrow SG9.0RS Manuel utilisateur
Sungrow
Sungrow SG2500-MV Guide de l'utilisateur
Sungrow
Sungrow SG4K6TL-M Manuel utilisateur
Sungrow
Sungrow SG100KU Manuel utilisateur
Sungrow
Sungrow SG125HV Manuel utilisateur
Sungrow
Sungrow SG125HX Manuel utilisateur
Sungrow
Sungrow SG125HV Manuel utilisateur
Sungrow
Sungrow SG250HX-US Manuel utilisateur
Sungrow
Sungrow SG3425UD Guide de l'utilisateur
Sungrow
Sungrow SG50KTL-M-20 Manuel utilisateur
Sungrow
Sungrow SG60KTL Manuel de l'opérateur
Sungrow
Sungrow SH RS Series Guide d'installation
Sungrow
Sungrow SG25CX-P2 Manuel utilisateur
Sungrow
Sungrow PVS-24MH Manuel utilisateur
Sungrow
Sungrow T65 Manuel utilisateur
