SUNFEEL DO4230TIN Manuel utilisateur
OPERATING AND INSTALLATION INSTRUCTIONS
BUILT-IN 30cm VITROCERAMIC HOB
DO4230TIN
DESCRIPTION OF THE HOB 27
SAFETY INSTRUCTIONS 28
INSTALLATON 30
Locating Your Built-in Hob 30
Electrical Connection of Your Hob 32
USAGE 34
Turn On and Turn Off The Control 35
Select Heater 35
Turn on dual- and triple zones 36
Set Cooking Level With and Without Heat Boost 36
Turn Off Individual Heaters 37
Timer Function 38
Key Lock 40
Stop & Go F 42
TOUCH CONTROL SAFETY FUNCTIONS 44
Sensor Safety Cut Off 44
Over Temperature Switch Off 45
Operating Time Limitations 45
Residual Heat Functions 46
CLEANING AND CARE 47
........................................................
..............................................................
...............................................................................
...........................................................
...............................................
...........................................................................................
...............................................
.................................................................................
.....................................................
......................
..........................................................
..............................................................................
........................................................................................
......................................................................................
.......................................................
..........................................................
.......................................................
...............................................................
CONTENTS:
1
.................................................................
....................................
2
DESCRIPTION OF THE HOB
Dear Customer,
It is important that you should read this manual for best performance and
to extend the life of your appliance. We recommend you to keep this manual
for future reference.
Your new hob is guaranteed and will give lasting service. This guarantee
is only applicable if the appliance has been installed and operated in
accordance with the operating and installation instructions detailed in this
manual.
Note:Appearance of your hob maybe different than the model shown above
due to its configuration.
Dual Zone
Heater Hob Frame
Single Zone
Heater
Vitroceramic
Surface
Touch Control
Panel
3
SAFETY INSTRUCTIONS
Please comply with these instructions. If you do not, any damage
resulting from improper, incorrect or negligent use or improper
connection or installation is not covered by the warranty.
·This appliance must only be used for the purpose of heating or cooking
food, any other use, for example heating rooms, working surface or storage
surface, is dangerous.
· Additions or modifications to the appliance are not permitted.
·Do not place or store flammable liquids, highly inflammable materials or
fusible objects on or near the appliance.
·Small children must be kept away from the appliance.
·The appliance may only be installed and connected by an authorised
service personal.
· The electrical safety of this hob is guaranteed only if it is connected to a
properly earthed system, which complies with the electrical safety standards.
·Built-in appliances may only be used after they have been built in to
suitable built-in units and work surfaces that meet the standards.
·Do not put pressure on the power supply cable while fitting the hob.
·Power supply cable length should not exceed 2m for isolation safety.
·In the event of faults with the appliance or damage to the glass ceramic
(cracks, scratches or splits), the appliance must be switched off and
disconnected from the electrical supply to prevent the possibility of an
electric shock.
·Repairs to the appliance must only be carried out by authorised service
personal.
·Make sure all the packaging has been removed before you use the
appliance.
·Cables from electrical appliances must not touch the hot surface of the
appliance or hot cookware.
4
.Never leave the the appliance hob unattended when cooking with fat or
oil. They can rapidly catch fire if overheated.
· Do not cut any food on the glass of the vitroceramic hob. Glass panels
should not be used as working surfaces.
· Be careful when using small household appliances, such as irons, near
the elements.
· Do not use the cooking zones with empty cookware or without cookware.
. Make sure all the controls are in the off position when not in use.
·For cleaning, the appliance must be switched off and cooled down.
·For safety reasons, the cleaning of the appliance with steam jet or high-
pressure cleaning equipment is not permitted.
· Use only stable flat-based pans.
·This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
·Children should be supervised to ensure that they do not play with the
appliance.
·If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid a hazard.
·WARNING: If the surface is cracked, switch off the appliance to avoid the
possibility of electric shock.
·WARNING: Accessible parts may become hot during use. Young children
should be kept away.
·For hobs, the appliance is not intended to be operated by means of an
external timer or separate remote-control system
5
The electrical connection of this hob should be carried out by an
authorised service personal or a qualified electrician, according to the
instructions in this guide and in compliance with the current regulations.
·Before connecting your appliance to the mains at home, make sure to
check the conformity of voltage settings, which are specified on the information
sticker attached to the appliance and/or packaking, with the usage conditions
available.
·The laws, ordinances, directives and standards in force in the country of
use are to be followed (safety regulations, proper recycling in accordance
with the regulations, etc.)
Locating your built-in hob
After removing the packaging material from the appliance and its accessories,
ensure that the hob is not damaged. If you suspect any damage, do not use
the appliance and contact an authorised service personal or a qualified
electrician immediately.
·This built-in hob is to be inserted into a cut out of a worktop.
INSTALLATION
·Create an opening with the dimensions shown in next picture. The distance
between the rear edge of the hob and any adjacent wall is depend on wall
surface. Please don’t use easily combustible material like curtain, paper at
nearby hob.
6
·Screw the 4 worktop mounting brackets on the side walls of product.
·Apply the one-sided self-adhesive sealing tape supplied all the way round
the lower edge of the cooking surface along the outer edge of the glass
ceramic panel. Do not stretch it.
520mm
290mm
37.5mm
Neighboorhood walls A [mm] B [mm]
Combustible 60 150
Non-combustible 40 50
270mm
490mm
Min. A
Min. B
Min.
130mm
Min.
25mm
worktop mounting bracket
7
Electrical connection of your hob
. Before proceeding with the electrical connection, verify that the current
carrying capacity of the system and the socket is adequate for the maximum
power rating of the hob.
·Electrical installation of the residence and the electrical current plug in
use must be earthed and conform with safety regulations.
·If there is no dedicated hob circuit and fused switch, they must be installed
by a qualified electrician before the hob is connected.
·Fused switch must be easily accessible once the hob has been installed.
·Do not use adaptors, multiple sockets and/or extension leads.
·This appliance conforms with the requirements ofthe following EEC
Directives:
1. Vitroceramic hob EEC/73/23 and 93/68, EEC/89/336 relating to
radio interference,
2. EEC/89/109 relating to contact with foods.
· A circuit breaker with a contact opening of at least 3 mm, rated 20 A and
delayed functioning type must be installed inside the supply circuit.
8
. For the touch controlled vitroceramic hob, the cable must be H05VV-F
3X1,5 mm² / 60227 IEC 53. You will find the connection diagram shown
on the back of your appliance.
·During installation, please insure that isolated cables are used.An incorrect
connection might damage your appliance. The guarantee will not cover
such damages.
·All repairs must be carried out by an authorised service personal or a
qualified electrician.
·Unplug your appliance before each maintenance. For reconnection, follow
the connection diagrams strictly.
BLUE
BROWN
YELLOW+GREEN
LN
3X1.5 mm , H05V V-F
type power supply cord must be used.
Grounding lead must be connected
to screw with symbol.
2
Mode Descriptions
USAGE
The appliance is operated by touching buttons and the functions are
confirmed by displays and acoustic signals.
9
Stand-By-Mode S-Mode Themainsareappliedtothehobcontrol
andallheaterdisplaysareofforaresidual
heatdisplayisactive.
Operating-Mode B-Mode Atleastoneheaterdisplayshowsaheat
settingbetween´0`and´9`
LockMode VR-Mode Thehobcontrolislocked.
Heat SettingFront Heater
Rear Heater Heat Setting
Dual-Oval
Zone Heater
Timer On-Off
Key Lock
Table des matières
Langues :
Autres manuels SUNFEEL Plaque
SUNFEEL
SUNFEEL PLV3FKT Manuel utilisateur
SUNFEEL
SUNFEEL PLV4FBT Manuel utilisateur
SUNFEEL
SUNFEEL PLV4FKT Manuel utilisateur
SUNFEEL
SUNFEEL PLINDU3FS Manuel utilisateur
SUNFEEL
SUNFEEL DO4331-ID Manuel utilisateur
SUNFEEL
SUNFEEL ECG4331 Manuel utilisateur
SUNFEEL
SUNFEEL EG4451IN Manuel utilisateur
SUNFEEL
SUNFEEL DO4230IN Manuel utilisateur
SUNFEEL
SUNFEEL DO4331-ID Manuel utilisateur
