Sunbeam 3108 Manuel utilisateur

Adjustable

Can Ot3ener

instruction

- Model #3108/M6del#3138

When using electrical appliances, basic safety

precautions should always be followed including the

following:

Read all instructions before using the can opener.

To protect against the risk of electrical shock, do not

put can opener in water or other liquid.

Close supervision is necessary when any can opener

is used by or near children:

Unplug from outlet when not in use, before putting on

or taking off parts, and before cleaning.

Avoid contacting moving parts.

Do not operate can opener with a damaged cord or

plug or after the appliance malfunctions, or is

dropped or damaged in any manner. Return can

opener to the authorized Sunbeam Appliance Service

Station for examination, repair or electrical or

mechanical adjustment.

The use of attachments not recommended or sold by

the manufacturer may cause fire, electrical shock or

injury.

Do not use outdoors.

Do not let cord hang over edge of table or counter or

touch hot surfaces.

Do not open pressurized [aerosol-type] cans.

Do not open cans of flammable liquids such as lighter

fluids.

Do not use can opener for other than intended use or

leave unattended while in use.

Do not operate this appliance inthe presence of explosive

and/or flammable fumes.

SAVETHESEINSTRUCTIONS

Readthe following instructions beforeusing the unit for thefirsttime.

FORHOUSEHOLDUSEONLY

This appliance hasa polarized plug (one blade iswider than the other).

To reducethe riskofelectric shock,this plug is intended to fit in a

polarized outlet onlyone way. Ifthe plug does notfullyfitin the outlet,

reversethe plug. If it still does not fit, contact a qualified electrician.

Do not attempt to defeatthis safetyfeature.

Plug electrical cord into 120 volt,60 cycleACoutlet.

Raisecan opener leverto upright position (A). Insert can so that the

lower edge ofthe canlip restson top ofthe drivewheel. Becertain that

the cutting edge is onthe inside ofthe can lip as shown (B).Push can

opener leverdown firmly(C)and hold until the can lid is automatically

pierced and the cutting action begins. Itis not necessaryto hold thecan

opener leverdown during the cutting cycle.

When the can isfullyopen, the cutting action will automatically stop.The

canwill remain in position until the leverisraised. To releasethe can,

grasp the canfirmly in one hand and raisethe leverwith the other hand.

The magnetic lid holder will retain the lid (D).

Dented Cans: Occasionally,badlydented canswill causethe can opener

to stall. Ifthis happens,grasp the dented canand guide itthrough the

cutting action manually until the damaged areasare passed.

Jammed Cans:Toopen acan that has becomejammed, raise thecan

opener leverand releasethe can. Begin thecutting action again in a new

place on the can lip.

To insure proper sanitation, all removableparts on the canopener should

bedetached and cleaned thoroughly in warm, sudsywater at regular

intervals.Beforecleaning, UNPLUGTHE CORDFROMOUTLET.The

motor housing easilywipes clean using a damp cloth. Neverimmerse the

motor housing in water.

Removingthe Lid litter:

Liftup to slide out aspictured (E).

Removingthe Cutting Unit:

Raisecanopener leverto its fullest upright position.

Pushcan opener leverto the right to removeit from the recessed

area (F).

DriveWheel

Wipe offdrivewheel with adamp cloth. Tothoroughly clean drive

wheel, usesmall brush to removeaccumulated dirt (G).

Replacing the Cutting Unit

With can opener leverin raised position, place knob in recessed area.

Push leverto the leftto snap it into position (H).

Replacethe lid lifter

Twist the knob to raise and lower the cutting

assembly.

To adjust the

height of the cutting assembly follow these directions:

1. Twist the knob in a counter-clockwise direction until the knob clicks

into place. The cutting assembly Is raised for

opening extra tall cans.

2. Twist the knob in a clockwise direction to

lower the cutting assembly for opening regular

size cans and for compact storage.

The motor and internal gears of your can opener unit are permanently

lubricated at the factory for lifetime service and require no further

attention. The cutting blade is made of hardened steel and is a special

design. It will last for years under normal use. Do not attempt to

sharpen.

2 YEAR LIMITED WARRANTY

Sunbeam-Oster Household Products warrants that, for a period of two years from

date of purchase, this product shall be free of mechanical and electrical defects in

material and workmanship. Our obligation hereunder is limited to repair or

replacement, at our option, of this product during the warranty period, provided

the product is sent postage prepaid directly to our factory service center:

SUNBEAM-OSTERHOUSEHOLDPRODUCTS

APPLIANCE SERVICE STATION

117 Industrial Central Row

Purvis, Ms 39475

Hattiesburg, MS 39401

DO NOT RETURN THIS PRODUCT TO THE PLACE OF PURCHASE: THIS MAY

DELAY THE PROCESSING OF YOUR WARRANTY CLAIM. This warranty does not

cover normal wear of parts, damage resulting from any of the following: negligent

use of the product, use with improper voltage or current, use contrary to

operating instructions, or disassembly, repair, or alteration by any person other

than our factory service center. Product repair or replacement as provided under

the above warranty is your exclusive remedy. Sunbeam Corporation (of which

Sunbeam-Oster Household Products is a division), shall not be liable for any

incidental or consequential damages for breach of any express or implied

warranty on this product. Except to the extent prohibited by applicable law, any

implied warranty of merchantability or fitness for a particular purpose on this

product is limited in duration to the duration of the above warranty. Some states

do not allow the exclusion or limitation of incidental or consequential damages, or

allow limitations on how long an implied warranty lasts, so the above limitations

or exclusion may not apply to you. This warranty gives you specific legal rights,

and you may also have other rights which vary from state to state.

Knives:

Plug the electrical cord into a 120 volt,60 cycleACoutlet.

Pressdown on the canopener leverto start the grinding wheel. Allow

the motor to developfull speed.

Insertthe knifeinto either slot ofthe sharpening guide, holding itflat

against the sloping wall ofthe housing. Lower the blade until it touches

the wheel.

Draw the knifeblade towards you (I), keepingthe bladeagainst the

sloping wall ofthe housing.Maintain only aslight pressure on the wheel.

Repeatthe same operation using the other slot. Alternate the knifeblade

from slotto slot to sharpen both sides ofthe blade. Continuethis

process until the desired sharpness is achieved.

SCiSSOrJ:

Pressdown on the can opener leverto startthe grinding wheel. Allow

the motor to developfull speed.

Open scissors,hold blade to besharpened with the other blade on the

bottom. Pull blade through slotfrom leftto right (Jj.

Turn scissorsoverand repeatwith other blade. Use light pressure and

continuous motion when sharpening.

Cord Storage:

A cord storage area is located on the bottom ofthe unit to store excess

cord. When the cutting assemblyis raised,pull out asmuch cord as

required to reachthe outlet.

01995 Sunbeam-OsterHouseholdProducts.

Sunbeam@isaregisteredtrademarkofSunbeamCorporation.All rightsreserved.

DistributedbySunbeam-OsterHouseholdProducts,Schaumburg.IL 60173

P.N.61659

38637~OWli-SUNS

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Sunbeam ouvre-boîte

Sunbeam

Sunbeam 3112 /Y Manuel utilisateur

Sunbeam

Sunbeam Open All CA2800 Manuel utilisateur

Sunbeam

Sunbeam OpenAll CA2800 Manuel utilisateur

Sunbeam

Sunbeam Open All Manuel utilisateur

Sunbeam

Sunbeam 3143 Manuel utilisateur

Sunbeam

Sunbeam OPEN ALL LJ-CA2800 Manuel utilisateur

Sunbeam

Sunbeam Open All CA2800 Manuel utilisateur

Manuels ouvre-boîte populaires d'autres marques

Clatronic

Clatronic DO 2852 Caractéristiques techniques

Coopers

Coopers Can Magic Manuel utilisateur

Black & Decker

Black & Decker LIDS OFF JW260 Instructions d'installation

Oster

Oster 3118 Manuel utilisateur

Emerson

Emerson BO61 Manuel utilisateur

Black & Decker

Black & Decker Gizmo EM200 Series Instructions d'installation

Hamilton Beach

Hamilton Beach 76606 - Pop-Top Electric Can Opener Manuel utilisateur

Kalorik

Kalorik USK DO 36918 Manuel utilisateur

Black & Decker

Black & Decker CO451 Instructions d'installation

Hamilton Beach

Hamilton Beach Walk-n-Cut 76503 Manuel utilisateur

Hamilton Beach

Hamilton Beach 76370 - Extra Tall Can Opener Manuel utilisateur

Kenwood

Kenwood CA-P70 Manuel utilisateur

Hamilton Beach

Hamilton Beach Open Ease Can Openers Manuel utilisateur

Black & Decker

Black & Decker EC100 Series Instructions d'installation

Windmere

Windmere WCO103S Instructions d'installation

Rival

Rival CN-742 Manuel utilisateur

aidapt

aidapt Spill Not Manuel de programmation

Orbegozo

Orbegozo CU 6500 Manuel utilisateur