Summers M94 Manuel utilisateur

Operator’s

Manual

MOUNTED HARROW

M94, M104, M105, M106 AND M108

ROLLING CHOPPERS

ROLLING BASKETS

SUMMERS MANUFACTURING CO., INC.

WEB SITE: www.summersmfg.com

DEVILS LAKE, NORTH DAKOTA 58301 ................................................... (701) 662-5391

IMPORTANT

THE OPERATOR IS RESPONSIBLE FOR

ADJUSTING THE MACHINE SINCE MACHINE

DOES NOT COME “FIELD READY” FROM

FACTORY.

CAUTION

READ & UNDERSTAND OPERATOR’S MANUAL

BEFORE USING MACHINE.

Warranty

Summers warrants only products of its manufacture against operational failure caused by defective materials or workmanship which

occur during normal use within 36 months from the date of purchase by the end user from Summers’ dealer.

Summers’ obligation is to replace free of charge any part of any product that Summers inspection shows to be defective excluding trans-

portation charges to Devils Lake, ND and return and also excluding all transportation costs from Summers’ dealer to the dealer’s customer

and all other costs such as removal and installation expense.

Summers shall not be liable for loss of time, manufacturing costs, labor, material, loss of prots, consequential damages, direct or indirect,

because of defective products whether due to rights arising under the contract of sale or independently thereof, and whether or not such claim

is based on contract, tort or warranty.

Written permission for any warranty claim return must be rst obtained from authorized Summers’ personnel. All returns must be ac-

companied with a complete written explanation of claimed defects and the circumstances of operational failure.

Written warranty for all component parts used in the manufacture of Summers products is available upon request. Warranty of such

component parts will be determined by said component manufacturer upon their inspection of the claimed defective part.

This express warranty is the sole warranty of Summers. There are no warranties, which extend beyond the warranty herein expressly

set forth. The sales for products of Summers under any other warranty or guarantee express or implied is not authorized. This warranty voids

all previous issues.

SUMMERS MANUFACTURING CO. INC.

DEVILS LAKE, NORTH DAKOTA 58301

1/16

INTRODUCTION

This manual provides the following information about your Mounted Harrow or Mounted Rolling Chopper.

ITEMS OF IMPORTANCE

A. Summers Mfg. Co., Inc. strongly recommends that each Operator READ and UNDERSTAND the Oper-

ator’s Manual before using the machine. In addition, this Operator’s Manual should be REVIEWED

at least ANNUALLY thereafter.

B. It is the policy of this company in improve its products whenever possible and practical to do so.

We reserve the right to make changes or improvements in the design or construction of parts at any

time without incurring obligations to install such changes on products previously delivered.

C. Reference to “right” and “left” in this manual is determined from a seated position in the drivers seat.

D. Parts are referenced in each drawing with the Summers Manufacturing Part Number. Use this Part

Number when ordering replacement parts from your Summers dealer.

E. Summers Mfg. can not be responsible for implement frame damage due to draft or weight of Mounted

Attachments.

OWNER REGISTER

Name____________________________________ Size _________________________________________

Address _________________________________

City _____________________________________

State/Prov. ______________________________ Date Purchased______________________________

Mail Code________________________________ Dealer_______________________________________

TABLE OF CONTENTS

Safety Section .......................................................................................................................................1-5

Disk Mounted Harrow Installation Guide.............................................................................................. 6

Mounting Arm Assembly - M94, M104, M105, M106 & M108........................................................... 7

4-1/2’, 6’ & 7-1/2’ 3-Bar M94 Section Assembly.................................................................................. 8

4-1/2’, 6’ & 7-1/2’ 4-Bar M94 Section Assembly.................................................................................. 9

6’, 8’ & 10’ 3-Bar M104-M108 Section Assembly............................................................................... 10

6’, 8’ & 10’ 4-Bar M104-M108 Section Assembly............................................................................... 11

Disk Brackets........................................................................................................................................ 12

JD510/512 Disk Ripper......................................................................................................................... 13

Mounting Instructions for Cultivators, Chisel Plows & Disks ...........................................................14-16

Mounting Instructions for JD1610/610 - M74...................................................................................... 17

Mounting Instructions for Disk Mounting Brackets............................................................................. 18

Mounting Instructions for JD235 Disks - M74...................................................................................19-21

Packing Lists......................................................................................................................................... 22

Rolling Chopper Assembly ................................................................................................................... 23

Rolling Basket Arms ............................................................................................................................. 24

Rolling Basket Assembly...................................................................................................................... 25

SAFETY-ALERT SYMBOL

This symbol is used to denote possible danger

And care should be taken to prevent bodily

Injury. This symbol means:

ATTENTION! BECOME ALERT!

YOUR SAFETY IS INVOLVED!

Denition of each Signal Word used in conjunction with the Safety-Alert symbol.

indicates an imminently hazardous situation which, if not avoided, will result in death or serious

injury. This signal word is to be limited to the most extreme situations.

indicates a potentially hazardous situation which, if not avoided, could result in death or serious

injury.

indicates a potentially hazardous situation which, if not avoided, may result in minor or moder-

ate injury. It may also be used to alert against unsafe practices.

GENERAL SAFETY PRACTICES

1. READ AND UNDERSTAND Operator’s Manual before using machine. Review at least annually

thereafter.

2. VERIFY all safety devices and shields are in place before using machine.

3. KEEP hands, feet, hair and clothing away from moving parts.

4. STOP engine, place all controls in neutral, set parking brake, remove ignition key and wait for all

moving parts to stop before servicing, adjusting, maintaining or unplugging.

5. BE CAREFUL when working around high pressure hydraulic system.

6. ALWAYS make sure that pressure is relieved from hydraulic circuits before servicing.

7. DO NOT ALLOW RIDERS.

8. USE EXTREME CARE when adjustments.

9. KEEP CHILDREN AWAY from machinery at all times.

10. NEVER ALLOW anyone to walk or work under a raised piece of equipment without installing transport

locks.

DANGER

WARNING

CAUTION

SECTION 1 - SAFETY

SAFETY DURING TRANSPORT

1. ONLY TOW at a safe speed. Use caution when making corners or meeting trafc.

2. USE a safety chain between tractor drawbar and implement hitch when transporting on public roads.

3. ALWAYS use transport locks when transporting on public roads.

4. COMPLY with local lighting, marking and maximum width regulations when transporting on highways.

SAFETY DECALS

1. KEEP SAFETY DECALS AND REFLECTORS CLEAN.

2. REPLACE missing or unreadable decals. New decals are available from your Summers dealer by

stating correct part number (PN) located in lower right hand corner.

1. TRANSPORT LOCK DECAL (PN 8Z0075)

2. GENERAL CAUTION DECAL (PN 8Z0276)

SECTION 1 - SAFETY

3. WING DANGER DECAL (PN 8Z0344)

4. ELECTROCUTION DANGER DECAL (PN 8Z0346)

5. PINCH POINT DECAL (PN 8Z0087)

SECTION 1 - SAFETY

6. AMBER REFLECTOR (PN 8Z0800)

7. RED-ORANGE REFLECTOR (PN 8Z0805)

8. RED REFLECTOR (PN 8Z0810)

SECTION 1 - SAFETY

GENERAL ASSEMBLY SAFETY PRACTICES

YOU ARE RESPONSIBLE for the safe assembly

of the machine.

DO NOT ALLOW CHILDREN or other unauthorized

persons within the assembly area.

WEAR PERSONAL PROTECTIVE EQUIPMENT

which includes a hard hat, eye protection, work

gloves and steel toed boots with slip resistant

soles.

DO NOT MODIFY the equipment or substitute parts

in any way. Unauthorized modication may impair

the function and/or safety of the machine.

USE SUITABLE LIFTING DEVICE for components

which could cause personal injury.

BLOCK UPANY RAISED PART of the machine. Be

sure machine is stable after blocking.

ALWAYS INSPECT LIFTING CHAINS AND

SLINGS for damage or wear.

BE SURE LIFTING DEVICE IS RATED TO

HANDLE THE WEIGHT.

STOP ENGINE, place all controls in neutral,

set parking brake, remove ignition key and

wait for all moving parts to stop before serving

or adjusting.

BE SURE PRESSURE IS RELIEVED from

hydraulic circuits before servicing or discon-

necting from tractor.

USE EXTREME CARE when servicing or

adjusting.

GENERAL ASSEMBLY INSTRUCTIONS

1. READ AND UNDERSTAND Operator’s Manual before assembly of machine.

2. Reference to “RIGHT” and “LEFT” is determined when machine IS VIEWED FROM THE REAR.

3. Reference to “FORWARD” means TOWARDS THE TRACTOR.

4. Reference to “REAR” means AWAY FROM THE TRACTOR.

DISK MOUNTED HARROW INSTALLATION GUIDE

Disk brackets and Spacer Tubes for M94 through M108 Mounted Harrow

See Pages 2.05 – 2.07 of Whole Goods Catalog for Sections Required

Use one short disk bracket with sections supported by one mounting arm. Use two short disk brackets to

mount a single harrow section across disk center. At locations other than disk center, a combination of brack-

ets and spacers (listed below) are required to attach mounted harrows to an angled implement frame.

Section First Choice Second Choice

Cross Tube

Model Width Length Brckt. 1 Brckt. 2 (C) Distance (D) Brckt. 1 Brckt. 2 (C) Distance (D)

M94 4 ½’ 16” Short Short +3” 8-9” Short Short +2” 7 –7 ½”

M94 6’ 34” Short Short +4” 11-14” Short Short +3” 8 – 9”

M94 7 ½’ 52” Short Long +3” 44 ½ -45” Short Long +2” 41 ½-44 ½”

M104/M108 6’ 23 ½” + 15” Short Long 35 ½” Short Short +4” 11 – 14”

M104/M108 8’ 47 ½” Short Long 35 ½-38 ½” Short Short +4” 11 – 14”

M104/M108 10’ 71 ½” Short Long +4” 47 ¾ -50 ¾” Short Long +3” 44 ½-47 ½”

UNIVERSAL DISK BRACKETS

HIGH CLEARANCE DISK BRACKETS

Section

Cross Tube First Choice Second Choice

Model Width Length Brckt. 1 Brckt. 2 (C) Distance (D) Brckt. 1 Brckt 2. (C) Distance (D)

M94 4 ½’ 16” Short Short +3” 8-9” Short Short +2” 7 –7 ½”

M94 6’ 34” Short Long 26 ¼ - 27” Short Short +4” 11 – 14”

M94 7 ½’ 52” Short Long +4” 38 ½ - 41 ½” Short Long +3” 35 ½ -38 ½”

M104/M106 6’ 23 ½” + 15” Short Long 26 ¼ – 29 ½” Short Short +4” 11 – 14”

M104/M106 8’ 47 ½” Short Long +4” 38 ½ - 41 ½” Short Long +3” 35 ½-38 ½”

M104/M106 10’ 71 ½” Short Long +4” 38 ½ - 42 ½ ” Short Long +3” 35 ½-38 ½”

C) Spacer Tubes W/Hardware 2” = 8H1500 4” = 8H1505

3” = 8H1503

D) Approximate centerline to centerline of Mounting Arms (8H2310) based on 18 degree rear gang angle

MH MNTNG ARM ASSY5/22/2018 8H2314.iam/

8X0073

1/2 X 5"

8X0123

3/4" X 5.5"

8X0099

5/8" X 6-3/4"

8X0304

5/8" LW

8X0250

5/8" N

8X0261

3/4" LN 8X0242

NY-LOCK 1/2" N

8X0118

3/4 X 4"

8X0014

1/4 X 3"

8X0222

1/4" LN

8X0261

3/4" LN

8H2190

8H1280

ARM LENGTH

8H2132 - 34"

8H2142 - 42"

8H2144 - 52"

FRAME SIZES

WING-ARM TRAVEL STOP

MATCH LOCATION LETTER

ON SUPPORT ROD ASSEMBLY

WING-ARM TRAVEL STOP

DO NOT OVERTIGHTEN

ARM MUST BE FREE TO ROTATE

ABC

8Z0101

SMC DECAL

8X0306

3/4" LW

8X0117

3/4 X 7"

2 1/2"

8H1394

8W1897

8H1315

8D5219

8H1309

8H1328

8X0269

8X0101

5/8" X 8"

NOT RQRD

WITH

DISK

BRACKET

8H1520 SHORT UNIVERSAL

8H1522 SHORT HI-CLEARANCE

8H1530 LONG UNIVERSAL

8H1532 LONG HI-CLEARANCE (SHOWN)

8X0099

5/8" X 6-3/4"

8X0304

5/8" LW

8X0250

5/8" N

8H1510

8H2295

FILLER

FOR BEHIND

8T4100

8H2184

8H2100

8W1205

5/8 x 3-1/16 x 3-1/4"

8X0256

5/8" FLNG NUT

8H2129

8H2131A

SPRING

URETHANE BUSHING

8H2128

8X0338

8X0268

8H2129

8H2125

Ce manuel convient aux modèles suivants

Autres manuels Summers Équipement pour pelouse et jardin

Summers

Summers M104 Manuel utilisateur

Manuels Équipement pour pelouse et jardin populaires d'autres marques

Vertex

Vertex 1/3 HP Caractéristiques techniques

GHE

GHE AeroFlo 80 Manuel utilisateur

Millcreek

Millcreek 406 Manuel utilisateur

Land Pride

Land Pride Post Hole Diggers HD25 Manuel utilisateur

extraspace

extraspace GardenStore Manuel utilisateur

Yazoo/Kees

Yazoo/Kees Z9 Commercial Collection System Z9A Manuel de programmation

Premier designs

Premier designs WindGarden 26829 Manuel utilisateur

Snapper

Snapper 1691351 Manuel utilisateur

Mosquito Magnet

Mosquito Magnet Patriot Manuel utilisateur

Perfect

Perfect BG2 Manuel utilisateur

P.Lindberg

P.Lindberg LS2 Manuel utilisateur

Gardena

Gardena Easy 1887 Manuel utilisateur

Makita

Makita UM104D Manuel utilisateur

AQUA FLOW

AQUA FLOW PNRAD Manuel utilisateur

Tru-Turf

Tru-Turf RB48-11A Golf Green Roller Guide de l'utilisateur

BIOGROD

BIOGROD 730710 Manuel utilisateur

Land Pride

Land Pride RCF2784 Manuel utilisateur

Makita

Makita UM110D Manuel utilisateur