Sumitomo Drive Technologies SI-232/JC-H Manuel utilisateur
RS-232C Interface
Inverter SF-520 Option
Technical Manual
Type SI-232/JC-H
SF-520
NOTICE
1. Make sure that this installation manual is
delivered to the end user of inverter unit.
2. Read this manual before installing or
operating the inverter unit, and store it in
a safe place for reference.
No.DM2203E-1Manual
2
Copyright © 2014 Sumitomo Heavy Industries, Ltd.
All rights reserved. No part of this publication may be reproduced,
stored in a retrieval system, or transmitted, in any form or by any
means, mechanical, electronic, photocopying, recording, or
otherwise, without the prior written permission of Sumitomo. No
patent liability is assumed with respect to the use of the
information contained herein. Moreover, because Sumitomo is
constantly striving to improve its high-quality products, the
information contained in this manual is subject to change without
notice. Every precaution has been taken in the preparation of this
manual. Sumitomo assumes no responsibility for errors or
omissions. Neither is any liability assumed for damages resulting
from the use of the information contained in this publication.
3
Contents
1 PREFACE AND SAFETY . . . . . . .4
2 RECEIVING . . . . . . . . . . . . . . . . . .8
3 PRODUCT OVERVIEW . . . . . . . .10
4 OPTION COMPONENTS. . . . . . .11
5 INSTALLATION PROCEDURE . .13
6 RELATED DRIVE PARAMETERS . . . 19
7 TROUBLESHOOTING. . . . . . . . .20
8 SPECIFICATIONS . . . . . . . . . . . .21
9 WARRANTY . . . . . . . . . . . . . . . .22
4
1 Preface and Safety
1 Preface and Safety
◆Applicable Documentation
The following manuals are available for the RS-232C Interface
Option:
Option Unit
SF-520 RS-232C Interface Option
Technical Manual
Read this manual first.
The Technical Manual is packaged with the
RS-232C Interface Option and contains a
basic overview of wiring, settings, functions,
and fault diagnoses.
SF-520
1 Preface and Safety
5
◆Terms
Note: Indicates a supplement or precaution that
does not cause drive damage.
Inverter
SF-520 Series
Operating and
Maintenance
Manual
No. DM2201E
To obtain instruction
manuals for Sumitomo
products access these
sites:
http://
www.shi.co.jp/PTC
SF-520 Series
Technical Manual
No. DM2202E
Drive: SF-520 Series
Option: SF-520 RS-232C Interface Option
SF-520
1 Preface and Safety
6
◆Registered Trademarks
• Company names and product names listed in this manual are
registered trademarks of those companies.
◆Supplemental Safety Information
Read and understand this manual before installing, operating, or
servicing this option unit. The option unit must be installed
according to this manual and local codes.
The following conventions are used to indicate safety messages in
this manual. Failure to heed these messages could result in serious
or possibly even fatal injury or damage to the products or to related
equipment and systems.
DANGER
Indicates a hazardous situation, which, if not avoided, will
result in death or serious injury.
WARNING
Indicates a hazardous situation, which, if not avoided, could
result in death or serious injury.
1 Preface and Safety
7
CAUTION
Indicates a hazardous situation, which, if not avoided, could
result in minor or moderate injury.
NOTICE
Indicates an equipment damage message.
8
2 Receiving
2 Receiving
◆Receiving
Confirm the packaging after receiving the RS-232C Interface
Option. If the wrong model is received or the RS-232C Interface
Option does not function properly, contact your supplier.
Components packaged with the option:
• The RS-232C Interface for copy unit/PC communication (SI-
232/JC-H)
• Technical manual
◆Additional Parts (Sold Separately)
Option Part
Number Comments
PC Interface
Cable WV103 D-sub 9 pin - RJ-45
LED Operator JVOP-182-
HParameter setting and copy
LED Operator
Cable
1 meter:
ICS-1
3 meter:
ICS-3
CAT5e UTP straight-through
cable with RJ-45 8 pin
connector
2 Receiving
9
◆Tool Requirements
Use a flat-blade screwdriver with the dimensions below for
installation or removal of the option cover and RS-232C option.
Blade width
3.0 mm max.
0.6 mm max.
Blade thickness
10
3 Product Overview
3 Product Overview
◆About this Product
The RS-232C Interface Option allows the drive to be connected to
a network or external device.
Possible connected devices include:
• LED Operator
• Personal computer using PC Setup Tool
These devices can be used to edit, view, and copy parameter
settings in the drive.
Table des matières
Autres manuels Sumitomo Drive Technologies Onduleur
Sumitomo Drive Technologies
Sumitomo Drive Technologies DeviceNet HF-520 Series Manuel utilisateur
Sumitomo Drive Technologies
Sumitomo Drive Technologies SI-485/J-H Manuel utilisateur
Sumitomo Drive Technologies
Sumitomo Drive Technologies AI-V3/J-H Manuel utilisateur
Sumitomo Drive Technologies
Sumitomo Drive Technologies DeviceNet HF-520 Series Manuel utilisateur
Sumitomo Drive Technologies
Sumitomo Drive Technologies HF-430NEO Series Mode d'emploi
