Tripod Adaptability
STYRKA S7 Series binoculars feature built-in
threads that allow the binocular to be attached to
a tripod using a binocular tripod adapter. These
threads can be accessed by unscrewing the logo
plate found on the front of the hinge. To attach the
binocular to a tripod, thread the adapter into the
binocular and attach the other end of the adapter
to a photographic tripod. Mounting the binocular
on a tripod allows for added stability and comfort
during prolonged viewing.
Care and Storage
Your STYRKA binocular will provide you years of dependable service in the field if it is cared for
and stored properly.
5. Do not leave the binocular in a car on a hot/
sunny day or near anything that generates heat
as this may cause damage.
6. Clean any dust, dirt or water that may get on
the binocular or inside moving parts as soon
as possible to prevent any unforeseen damage.
1. Protect the binocular from impact and do not
force any of the moving parts beyond their limits.
2. Protect the optics of your binocular by putting
on all lens caps when not in use.
3. Store your binocular in a cool, dry place
whenever possible.
4. When storing for an extended period of time,
place the binocular in a plastic bag or airtight
container with a desiccant.
Waterproof / Fogproof
STYRKA S7 Series binoculars are waterproof and filled with dry nitrogen gas to prevent the housing from
fogging internally. This allows the binoculars to be used in all weather conditions.
6 7
Fig. 5
