Special Function 1: Create User
The on y active user by factory settings is the user with the master code. Further users wi have to be
created before they can operate the ock.
It is recommended that the Master inform users that, even after entering va id user codes, he can open the
safe with his Master Code at any time.
Note:
• Can on y be executed with the master code.
• The new code must contain 6 digits.
• Do not use any persona or simi ar y known data, such as birthdays, for your code.
• Simp e codes that are easy to guess, may not be used.
Avoid to record the se ected code or save to disk. Shou d that for various reasons cannot be avoid, so
the recorded code is to be kept safe and to be protected against unauthorized access by third parties.
• New codes wi be rejected if
- the new code deviates from an existing code by on y one digit
- the new code is identica to the code of a deactivated user (see specia function 3)
• If the new code is rejected, the programme wi exit the function immediate y.
• For security reasons, you shou d on y change the code when the safe’s door is open. P ease check
that the new code is functioning proper y before c osing the door.
• User number 9 for bypassing opening de ay (quick open code) can on y be created if
- Opening de ay is switched off (see specia function 9)
- Opening de ay is turned on, the opening de ay time has passed and the time frame for opening is
active (see specia function 9)
