7
PROBLEMS
Studio Projects e ectronics are extreme y resistant to physica damage, but
if the unit fai s to work after being dropped, it shou d be returned in adequate
packing to the supp ier. A doub e test and inspection system means that
manufacturing fau ts are non-existent but shou d any fau t occur, it wi be
repaired (or rep aced) free of charge except where the fau t has been
caused by physica damage. (SEE WARRANTY INFORMATION)
ORIGINS AND MANUFACTURE
Studio Projects E ectronics are entire y designed in the USA. They are man-
ufactured in China by 797 Audio to a specification created by Studio Projects,
Torrance, Ca ifornia. A Studio Projects e ectronics are inspected and tested
at the factory, then inspected and tested again at PMI Audio Groups faci ity
prior to shipping. Studio Projects e ectronics meet the requirements of e ec-
tronic equipment so d both in the USA, Canada, and the European Union. A
Studio Projects products are CE Approved, and a power supp ies are UL
rated.
DECLARATION OF CONFORMITY
This ana og audio processing equipment conforms to the standards and
requirements of the
European Economic Community.
The EC Harmonized standards that have been app ied are;
a) E ectrica equipment (safety) Regu ations 1994 (S.I. 1994/3260)
b) E ectromagnetic Compatibi ity Directive (89/336/EEC) incorporating
(S.I. 1992/2372)
6
TROUBLESHOOTING
1) The mi rophone doesn't work!
Have you got something p ugged into the INSTRUMENT input or is the
mic/ ine set incorrect y? (this can disab e the microphone input)
Is the phantom power on? (capacitor microphones).
If there is indication on the VU LED, is the output vo ume contro turned
down?
2) Got signal going through but no output?
Is there enough signa ? Use p enty of drive.
Is the output gain contro turned up, and do you have a proper y
working monitor system?
3) I don’t get any power!
Is the supp ied power supp y p ugged in correct y? Make sure the
barre connector is pushed a the way into the socket, and be sure you
have avai ab e power to the supp y.
rate. No repair or rep acement by Purchaser of any Product or part
thereof sha extend the warranty period as to the entire Product. The
specific warranty on the repaired part on y sha be in effect for a period
of ninety (90) days fo owing the repair or rep acement of that part or the
remaining period of the Product warranty, whichever is greater.
2. Exc usive Remedy: Acceptance: Purchaser’s exc usive remedy and
PMI’s so e ob igation is to supp y (or pay for) a abor necessary to
repair any product found to be defective within the warranty period
and to supp y, at no extra charge, new or rebui t rep acements for
defective parts. If repair or rep acement fai s to remedy the defect, then
and on y in such an event, sha PMI exchange to Purchaser a new or
reconditioned unit. Purchaser’s fai ure to make a c aim as provided in
paragraph 1 above or continued use of the product sha constitute an
unqua ified acceptance of such Product and a waiver by Purchaser of
a c aims thereto.
3. Exceptions to Limited warranty: PMI sha have no iabi ity or ob igation
to Purchaser with respect to any Product subjected to abuse, improper
use, neg igence, accident, modification, fai ure of the end-user to fo ow
the operating and maintenance procedures out ined in the users manua ,
attempted repair by non-qua ified personne , operation of the unit
outside of the pub ished environmenta and e ectrica parameters, or
if such products origina identification (trademark, seria number) markings
have been defaced, a tered, or removed. PMI exc udes from warranty
coverage, Products so d AS IS and/or WITH ALL FAULTS and
exc udes used products which have not been so d by PMI to the
Purchaser. PMI a so exc udes from warranty coverage consumab es
such as fuses and batteries, etc.
4. Proof of purchase: The dea er’s dated bi of sa e must be retained as
evidence or the date of purchase and to estab ish warranty e igibi ity
STUDIO PROJECTS LIMITED WARRANTY
THIS PRODUCT IS FOR PROFESSIONAL USE ONLY
PMI Audio Group warrants that a products wi be free from defects in
materia or workmanship:
A: For a period of (1) one year from the date of purchase (hereinafter the
abor warranty period), PMI Audio Group wi repair or rep ace this Product if
determined to be defective. After the expiration of the abor warranty period,
the Purchaser must pay abor charges.
B: In addition, PMI Audio Group wi supp y, at no charge, rep acements for
defective parts for a period of (one year) from the date of purchase. During
the abor warranty period, to repair the Product, Purchaser must return the
defective Product, freight prepaid, or de iver it to PMI Audio Group Service
Center. The product to be repaired is to be returned in either its origina
carton or a simi ar package affording an equa degree of production. PMI
Audio Group wi return the repaired Product freight prepaid to the
Purchaser. PMI Audio Group is not ob igated to provide Purchaser with a
substitute unit during the warranty period or at any time.
CONDITIONS
1. Notification of c aims: Warranty Service: If Purchaser discovers that the
Product has proven defective in materia or workmanship, then written
notice with an exp anation of the c aim sha be given prompt y by
Purchaser to PMI but a c aims for warranty service must be made within
the warranty period. If after investigation PMI determines that the reported
prob em was not covered by the warranty, Purchaser sha pay PMI for the
cost of investigating the prob em at its then prevai ing time-and-materia s
