Strongman Tools Telford Manuel utilisateur
Version 1
1
INSTALLATION MANUAL& OPERATION
INSTRUCTIONS
SINGLE POST CAR PARKING LIFT
Version 1
2
Date: 5/06/2018
TABLE OF CONTENTS
CHAPTER 1: USER’S RECORD 3
CHAPTER 2: INTRODUCTION 4
CHAPTER 3: SAFETY INSTRUCTIONS 5
CHAPTER 4: DESCRIPTION AND TECHNICAL DATA 9
CHAPTER 5: INSTALLATION INSTRUCTIONS 12
CHAPTER 6: INSTALLATION STEPS 17
CHAPTER 7: OPERATION INSTRUCTIONS 30
CHAPTER 8: MAINTENANCE 34
CHAPTER 9: ELECTRIC & HYDRAULIC DIAGRAMS 36
CHAPTER 10: TROUBLE SHOOTING 41
CHAPTER 11: LIMITED WARRANTY 43
NOTES 44
Version 1
3
CHAPTER 1: USER’S RECORD
RECORD BELOW INFORMATION WHICH LOCATED ON THE NAME PLATE
MODEL NO ____________________________
SERIAL NO ____________________________
CUSTOMER ____________________________
DATE OF INSTALLATION _________________
WE HEREBY DECLARED THAT THE ABOVE MENTIONED MACHINE HAS BEEN INSTALLED
CORRECTLY. ALL FUNCTIONS HAVE BEEN CHECKED AS WELL AS CORRECT OPERATING
OF ALL SAFETY DEVICES. WE CONSIDER THEREFORE THE MACHINE WORK IN GOOD
CONDITION.
Date of Installation The authorized technician
---------------------------- ------------------------------------
The customer
---------------------------------
(READ THIS MANUAL COMPLETELY AND PAY MORE ATTENTION TO THE INSTRUCTIONS BEFORE INSTALLING)
Version 1
4
CHAPTER
2:
INTRODUCTION
This
Manual
has
been
made
to
supply
the
owner
as
well
the
user
with
the
basic
instructions
for
installation
and
a
correct
use
of
the
Single
post
car
parking
lift
.
Read this guide carefully before using the lift and follow the instructions given by this guide to grant
it a correct function, efficiency and a long service life.
Single
post
car
parking
lift is
dependant
parking
type
where
it
requires
valet
to
remove
lower
car
away
before
lowering
the
platform.
This lift is suitable for residential parking purposes. The platform moves only vertically, so that the
users have to clear the ground level to get the higher level car down. It is hydraulic driven Type that
lifted directly by cylinder with chain connected to carriage.
This is electro-hydraulic lift used ONLY for motor vehicle parking.
The product designed according to the EN 1493:2010 and EN 14010:2003+A1:2009.
Reference of Directive Machine: 2006/42/EC.
Working Principle:
1. When operating the unit and pushing UP Button, the hydraulic power unit will be electrically
activated to pump hydraulic oil from tank to hydraulic oil cylinder.
2. The hydraulic cylinder will pull upwards the steel chain which is connected to the carriage.
3. The carriage will lift the platform as both of them are connected with bolts.
4. Once reaching pr-determined lifting height, the carriage will touch the limit switch and stop
the hydraulic motor.
5. The ground floor under the platform is free for parking lower car.
Version 1
5
CHAPTER 3: SAFETY INSTRUCTIONS
1. Read and understand all safety warning procedures before operating the parking lift.
2. Do not install the parking lift on any asphalt surface.
3. This parking lift is designed for parking motor vehicles that weighs within its max lifting
capacity.
4. Exceeding the maximum lifting weight will cause grave damage to the lift and DANGEROUS
INJURIES for the persons.
5. This parking lift, in its standard version, is not designed for outdoor use.
6. This parking lift is not designed to be used as car service lift to do any maintenance for the
car on platform.
7. The manufacturer doesn’t bear any responsibility for any accidents or damage might
happen to the cars or/and persons due to misuse of the lift.
8. Keep hands and feet away from any moving parts. Keep feet clear of parking lift when
lowering.
9. The parking lift MUST only be used by qualified staff, properly trained for such work.
10.During installation, do not wear unfit clothes, large cloves, ties, etc, which could get caught
by moving parts of the machine.
11. The parking lift surrounding area must be free from people or objects which could be a
danger for lifting operations.
12.Use suitable handling and lifting tools/equipment such as crane, forklift, and pallet lift during
off-loading of the packages and during installation of different parts.
13.Always insure the safety devices are engaged before any attempt to work on or near
vehicle.
Version 1
6
14.The parking lift is only designed to park the entire body of vehicle, having maximum weight
not more than the lift capacity.
15.The vehicle must be centered and positioned in a stable correct way with respect to the
platform and following the instructions given by manufacturer.
16.Make sure that the lift and its devices are working correctly, according to the specific
instructions for maintenance.
17.Do not modify the parking lift without manufacturer’s written approval.
18.If the parking lift will not be used for a long period, proceed as follows:
a. Disconnect the energy source.
b. Empty the oil from the Hydraulic unit tank.
c. Grease the moving parts which might be damaged by dust or drying out.
19.Only Authorized personnel are allowed to operate the control box. Only person with
qualification for repairing electrical appliances could open control box.
20.Control box is allowed to open only after power is cut off.
21.Installation technicians should be healthy, well trained and qualified to carry on the
installation with experience for both mechanical &electrical work.
22.The car must be parked at the right direction.(See below Fig.1)
Version 1
7
WARNING SIGNS
Version 1
8
Fig.2
Fig.3
Version 1
9
CHAPTER 4: DESCRIPTION AND TECHNICAL DATA
4.1 OVERALL DESCRIPTION
1
. Unit Base
2. Cover of base
3. Carriage
4. Post
5. Support beam
6. Platform (3 pcs)
7. Ramp
8. Wave plate
9. Stopper
10. Hydraulic power unit
motor
11. Oil Tank
12. Stand of control
box
13. Control
box(could be
fixed on the post)
Version 1
10
4.2 TECHNICAL DATA
4.3 Identification Plate with Serial Number:
Fig.4 Fig.5
Manufacturer Strongman Tools Ltd
Machine Type Single Post Car Parking Lift – Hydraulic driven
Model NO. Telford - Single Post
Max Lifting Capacity 2000 Kg
Max Lifting Height 1820mm
Max dimension of vehicle 5000*1850*1550mm
Max weight of vehicle 2000 Kg
Lock Release Type Electric lock release
Outline Dimension 3945x 2631x 2479 mm
Unit Weight 1300 Kg
Parking Width 2000mm
Rise/Drop Time 60 S/50 S
Power Supply/Motor Capacity 220V/ 1Ph/ 50Hz. - 2.2 KW
Run Way & Ramps Diamond Steel Plates
Noise Level ≤85dB
Platform – Middle Diamond Steel Plates and removable Corrugated
Galvanized Steel Plates
Table des matières
