PRECAUTIONS
Important safety instructions. Read carefully and keep for future reference!
Persons not holding written authorisation from manufacturer are not permitted to proceed
with any change, modication or repairs that may be required. Only original parts may be used
for authorised modications or replacements.
The Stromtank is only designed for indoor use and must under no circumstances be subjected
to rain, snow or other humid or dusty conditions. The maximum specications of the device
shown on the type plate must be adhered to.
The weight of the Stromtank can be up to 265 Ibs /125 kg depending
upon the model. Use an appropriate lifting method as well as help from a
third party when installing the equipment.
When the Stromtank is running, it generates voltage that can be potenti-
ally lethal. Work on or close to the installation must only be carried out by
thoroughly trained and qualied personnel. Do not attempt to carry out
on-going maintenance of this product yourself. There are NO USER SER-
VICEABLE PARTS INSIDE the unit. Do not open the chassis or remove any
of its screws. In case of any service needs contact your Stromtank dealer.
When working on the electrical installation, it is important to be certain
that the source of DC voltage coming from the battery as well as the sour-
ce of AC voltage coming from a generator or electric circuit have been
disconnected from the electrical installation.
Even when the Stromtank has been disconnected from the supply sour-
ces (AC and DC), a dangerous voltage may remain at the outputs. To eli-
minate this risk you must switch the Stromtank OFF using the ON/OFF
button. After 10 seconds the electronics are discharged and interventi-
on may take place without any danger. All elements connected to the
Stromtank must comply with the applicable laws and regulations.
2
PRECAUTIONS
Important safety instructions. Read carefully and keep for future reference!
Persons not holding written authorisation from manufacturer are not permitted to proceed
with any change, modication or repairs that may be required. Only original parts may be used
for authorised modications or replacements.
The Stromtank is only designed for indoor use and must under no circumstances be subjected
to rain, snow or other humid or dusty conditions. The maximum specications of the device
shown on the type plate must be adhered to.
The weight of the Stromtank can be up to 265 Ibs /125 kg depending
upon the model. Use an appropriate lifting method as well as help from a
third party when installing the equipment.
When the Stromtank is running, it generates voltage that can be potenti-
ally lethal. Work on or close to the installation must only be carried out by
thoroughly trained and qualied personnel. Do not attempt to carry out
on-going maintenance of this product yourself. There are NO USER SER-
VICEABLE PARTS INSIDE the unit. Do not open the chassis or remove any
of its screws. In case of any service needs contact your Stromtank dealer.
When working on the electrical installation, it is important to be certain
that the source of DC voltage coming from the battery as well as the sour-
ce of AC voltage coming from a generator or electric circuit have been
disconnected from the electrical installation.
Even when the Stromtank has been disconnected from the supply sour-
ces (AC and DC), a dangerous voltage may remain at the outputs. To eli-
minate this risk you must switch the Stromtank OFF using the ON/OFF
button. After 10 seconds the electronics are discharged and interventi-
on may take place without any danger. All elements connected to the
Stromtank must comply with the applicable laws and regulations.
2
PRECAUTIONS
When the Stromtank is running, it generates voltage that can be potenti-
ally lethal. Work on or close to the installation must only be carried out by
thoroughly trained and qualied personnel. Do not attempt to carry out
on-going maintenance of this product yourself. There are NO USER SER-
VICEABLE PARTS INSIDE the unit. Do not open the chassis or remove any
of its screws. In case of any service needs contact your Stromtank dealer.
When working on the electrical installation, it is important to be certain
that the source of DC voltage coming from the battery as well as the
source of AC voltage coming from a generator or electric circuit have been
disconnected from the electrical installation.
Even when the Stromtank has been disconnected from the supply sources
(AC and DC), a dangerous voltage may remain at the outputs. To eliminate
this risk you must switch the Stromtank OFF using the ON/OFF button.
After 10 seconds the electronics are discharged and intervention may take
place without any danger. All elements connected to the Stromtank must
comply with the applicable laws and regulations.
The weight of Stromtank S2500 is 135 Ibs / 61 kg. Use an appropriate lifting
method as well as help from a third party when installing the equipment.
Persons not holding written authorisation from manufacturer are not permitted to proceed
with any change, modication or repairs that may be required. Only original parts may be
used for authorised modications or replacements.
The Stromtank is only designed for indoor use and must under no circumstances be sub-
jected to rain, snow or other humid or dusty conditions. The maximum specications of the
device shown on the type plate must be adhered to.
Important safety instructions. Read carefully and keep for future reference!
