Streamit SAS100 Manuel utilisateur

Page 1

Streamit Audio Streamer SAS100

User’s manual

PREFACE.......................................................................................................................................................................................2

UPPLIED MATERIALS

...................................................................................................................................................................2

NTRODUCTION

.............................................................................................................................................................................2

NOTICES ABOUT TRADEMARKS...........................................................................................................................................3

DISCLAIMER................................................................................................................................................................................3

EQUIRED EQUIPMENT

..................................................................................................................................................................3

F IT

’

S STILL NOT WORKING

….......................................................................................................................................................4

RONT VIEW

..................................................................................................................................................................................4

EAR VIEW

...................................................................................................................................................................................4

THE INSTALLATION..................................................................................................................................................................5

ADSL

LINE AND THE

ADSL

MODEM

.....................................................................................................................................5

REPARING THE

SAS100 ..............................................................................................................................................................5

ONNECTING THE PRODUCT WITH AN AUDIO INSTALLATION

........................................................................................................5

ONNECTING THE PRODUCT TO THE MAINS POWER SUPPLY

..........................................................................................................5

ONNECTING THE PRODUCT TO THE ETHERNET CONNECTOR OR

ADSL

ROUTER

...........................................................................5

THE FIRST-TIME CONFIGURATION OF THE PRODUCT ................................................................................................6

HE STATUS PAGE

.........................................................................................................................................................................8

HE NETWORK PAGE

.....................................................................................................................................................................9

N THIS SCREEN YOU CAN CONFIGURE THE

ADDRESS OF THE PRODUCT

E ADVISE YOU WHEN USING AN EXTERNAL AUDIO

SERVER TO ASSIGN THE

ADDRESS AUTOMATICALLY BY DHCP

...................................................................................................9

HEN YOU WANT TO USE THE BUILT

IN ICECAST SERVER WE ADVISE YOU TO USE A FIXED

ADDRESS

LEASE CHOOSE AN

ADDRESS WHICH IS WITHIN THE ADDRESS RANGE OF THE

DHCP

SERVER OF THE ROUTER

LEASE NOTE YOU NEED TO CHANGE

SOME SETTINGS IN THE

ADSL

ROUTER ALSO IN THIS CASE

...........................................................................................................9

ONFIGURING THE

ADSL

ROUTER

................................................................................................................................................9

ONFIGURING THE

UDIO SETTINGS

...........................................................................................................................................11

ONFIGURING THE

UDIO STREAMING SETTINGS

.......................................................................................................................12

ESTING OF THE PRODUCT WITH AN EXTERNAL ICECAST

SERVER

.............................................................................................13

ESTING OF THE PRODUCT WITH THE BUILT

IN ICECAST SERVER

.................................................................................................14

SWITCHING OFF THE PRODUCT.........................................................................................................................................14

ADJUSTING THE SAS100 PARAMETERS............................................................................................................................15

PDATING THE FIRMWARE

..........................................................................................................................................................15

SPECIFICATIONS......................................................................................................................................................................16

STREAMIT SUPPORT...............................................................................................................................................................16

Page 2

Preface

Supplied materials

We thank you very much for the purchase of the SAS100 Audio Streamer.

Please check if the following parts are in the giftbox. If you miss a part, or a part is damaged, please contact your

Streamit dealer.



SAS100 unit



Power adapter



Ethernet cable

With the aid of this user’s manual and some basic PC and internet technology knowledge you should be able to

configure the SAS100 yourself.

The operation of the device is easy: you only need to press the power button.

Introduction

In this user’s manual, the following symbols are used for important instructions. Please pay attention to the

instructions which are mentioned near these symbols.

Warning

These are instructions which can cause harm to people or damage to the device if they are not followed properly. It

is important to read and follow these instructions carefully.

Important

This is an instruction which is important in order to understand the correct behavior of the device.

Page 3

Notices about trademarks

•All other tradenames which are used in this users guide, are owned by their respective owners.

permission of Streamit BV. No patent liability is assumed, with respect to the use of the information contained herein.

Disclaimer

This manual has been validated and reviewed for accuracy. The instructions and descriptions it contains are

accurate for the product at the time of this manual’s production. However, succeeding products and manuals are

subject to change without notice. Streamit assumes no liability for damages incurred directly or indirectly from errors,

omissions or discrepancies between the product and the manual.

EU Declaration of Conformancy

This product carries the CE-Mark in accordance with the related European Directives. CE marking is the

responsibility of Streamit BV, Flight Forum 3543, 5657 DW Eindhoven, Netherlands.

Warning

This is a class A product. In a domestic environment this product may cause radio interference in which case the

user may be required to take adequate measures.

FCC Compliance Statement

NOTE: This device complies with Part 15 of the FCC limits for Class B digital devices FOR HOME OR OFFICE USE

(“home or office” interference requirements are more stringent than “outdoor” requirements. Operation of this device

is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

The Streamit audio encoder/streamer does not contain any user-servicable parts. Repairs should be made only by

an authorized Streamit service center. Unauthorized repairs or modifications could result in permanent damage to

the equipment, and void your warranty and your authority to operate the device under Part 15 regulations.

Required equipment

Before you are able to listen audio broadcasts through the internet, you will need some other items beside the

Streamit audio encoder/streamer. We distinguish the following situations:

1. You do not want to use a streaming audioserver hosted by an internet serviceprovider and you already have

a DSL line with sufficient bandwidth to the internet.

2. In all other cases.

In the first situation you need:

•An ADSL line and modem with integrated router and at least 2 ethernet connections. It is important that this

line has enough upstream bandwidth and is not shared with too many other DSL lines (advise: maximum 20-

25). You can calculate the number of listeners which can listen simultaneously with the following formula:

upstream bitrate ADSL (in kbit/s) * % bandwidth available / bitrate per listener. It is also important the DSL

line has a fixed IP address.

For example: with an upstream bandwidth of 256 kbit/s, an average bandwidth availability of 70% and an

average audioquality, so let’s say 24 kbit/s stream bitrate, you can support about 7 to 8 listeners

simultaneously. With a 1024 kbit/s line this amount is about 30.

Page 4

The average availability of an ADSL line cannot be guaranteed by Streamit; this depends on the

amount of traffic on the internet. For this reason do not look only after the price of the DSL

subscription, but also check the guarantees which are offered by your network supplier.

In the second situation you need:

•An ADSL line and modem with integrated router and at least 2 ethernet connections.

•A subscription to a service provider which supports audio streaming with an icecast server.

For the configuration of the SAS100 you need in both situations a laptop or PC with an Ethernet interface and

network cable.

If it’s still not working…

We do understand that installation of this software with a limited knowlegde of computers and software can be

difficult, but it should not be.

In case you do not succeed, we ask you to contact the supplier of the product. Streamit only supports (by phone or

email) customers who have bought this product directly from them. Furthermore, Streamit offers free support through

the discussion forum on their website. Have a look at www.stream-it.nl!

Front view

Rear view

Important

Page 5

The installation

The ADSL line and the ADSL modem

The installation of the ADSL line is outside the scope of this manual. This also applies for the ADSL modem. Please

read the documentation you have received from your ADSL provider and/or ADSL modem supplier.

Preparing the SAS100

1 Remove the packaging material.

2 Mount the supplied plastic bumpers under the product to prevent damaging the surface on which the product will

be placed.

3 Place the product on a location close to an ethernet interface or ADSL router and mains power supply.

Connecting the product with an audio installation

The audio installation needs to be connected to the Mic-input or the Line-input of the product.

We strongly recommend you to use the Line-input for this.

In case you have problems with hum or noise, it is advised to install an audio DI (direct injection) box between the

audio installation and the product.

Important! To ensure a reliable operation of the SAS100 many audioinstallations need to

be connected through a galvanic isolation. Streamit provides these devices.

Connecting the product to the mains power supply

Warning

•Never use wet hands when putting the power adapter in the main. And also, never remove the power

adapter from the main with wet hands.

•Do not cut or damage the cord of the power adapter. Also do not place heavy objects on the cord. This can

cause short-circuit, which can result in fire or electrical shocks.

•Pulling the cord can damage the wire and/or isolation, which can case fire or electrical shocks.

•The use of power adapters, which have not been recommended for this product, can result in overheating

and damage of the product. This can cause fire, electrical shocks and other dangers. Only use the supplied

power adapter.

•Do not place the product in places with direct sunlight or high temperatures. This can result in the change of

the colors of the product and/or deforming of the casing. Ensure good ventilation around the power adapter

and the product.

•Applying the product to situations with rapid changing temperatures can result in condensation (small

amount of water) on the inner and outer surface of the product. To ensure a long lifetime of the product, this

should be prevented as much as possible. Wait until the condensation has disappeared before you use the

product again.

Put the cord of the power adapter into the product and the mains power supply and press on the power button.

Connecting the product to the ethernet connector or ADSL router

Connect the product to the ethernet connector or ADSL router with the attached ethernet cable.

When everything is ok the green led of the Ethernet connector will be continuously on. The yellow led will flash

irregularly. If this doesn’t happen, please read in the chapter Troubleshooting to check what can be wrong.

Page 6

The first-time configuration of the product

To configure the product, a laptop or PC is required.

Connect the laptop or PC to the router.

The product uses DHCP configuration by default. You can easily check in your router which IP address has been

assigned to the product. See for an example the figure below:

In this example the product “Streamit SAS100” got address 192.168.2.47. This address is also shown on the status

page of the product, see further on in this manual.

If you cannot view this screen, you always can access the audio encoder/streamer through IP address 10.0.0.254.

Start the webbrowser of you PC and enter the following URL: <address product>. In this example: 192.168.2.47.

The following screen will be shown:

Page 7

In this screen (and all other screens) you will read the version number of the firmware on the bottom line.

Enter as Username (Gebruikersnaam)=streamit and password (wachtwoord)=lukas . Now press on the button

Inloggen.

The next screen will be shown now:

Page 8

The status page

This is the status screen which shows the following information:

Status information:

External IP The IP-address on which the SAS100 can be reached from outside the network

MAC serialnumber: Physical address of the ethernet interface of the product.

Ip number: Address where the product is known within the local network.

Time / Uptime: 10:26:10 up 5 min indicates that at 10h26 the product has been used for 5 minutes.

Load average indicates the avarage processor load.

Software version: Version of the current firmware.

Bytes sent: Amount of bytes which have been send to the network.

Stream information:

Per audiostream (maximum 2) the following information is given:

Stream 1: The encoder which is used for the stream (in this example 40 kbit/s Mono)

Stream title 1: The name of the stream as indicated when listening to this stream with a PC software

program like Winamp.

Stream ports: Indicates the ports associated with this stream

Stream 1 URL: Address which should be used with a local connected PC to listen to the audiostream. In

this example: http://192.168.2.110:8000/lukas. By clicking on this link, – when installed -

Winamp should start on your PC.

When the internal Icecast server is used, its status can be checked by pressing the URL of the icecast Status Page.

But now we will configure the product by pressing on the Netwerk button.

Page 9

The network page

The following screen is shown now:

In this screen you can configure the IP address of the product. We advise you when using an external audio server

to assign the IP address automatically by dhcp.

When you want to use the built-in icecast server we advise you to use a fixed IP address. Please choose an address

which is within the address range of the DHCP server of the router! Please note you need to change some settings

in the ADSL router also in this case.

Configuring the ADSL router

The router functionality which is in your ADSL modem, protects your computer (and this product) against unwanted

visitors from the internet. The standard settings ensure that your computer is not accessible from outside (through

your ADSL line).

However, in some cases it is required that people (or computers) from outside get access to a part of the product.

For example when they want to listen to your streams. In this case a small door needs to be opened in the router.

Most of the ADSL routers fortunately have this possibility. The configuration of an ADSL router for this purpose will

be described here based on an Edimax router.

Page 10

The virtual server configuration ensures that external users who want to access your SAS100 through your ADSL

line automatically are forwarded to the product.

With other words, depending on the requested service (TCP/UDP-portnumber), the router sends the external service

request to the right server (which is on another internal IP-address).

For example, when you configure the option [Type/Public Port] to TCP/80 (HTTP or Web) and the option [Private

IP/Port] om 192.168.2.2/80, all http-requests from external users will be send to the device which is connected at

internal IP-address 192.168.2.2 on port 80. So by entering the external IP-address which is provided by the DSL

provider and port number, users can get access to the required service on the local device.

How should the router be configured for audio broadcasts? Assumed that the internal IP-address of the product is

192.168.2.70, you enter 70 as Private IP. Because the integrated icecast2 server uses port 8000, you enter 8000 at

Private Port. You are allowed to enter what you want at Public Port, but for ease of use it is recommended to enter

8000 here also.

The TCP protocol is used, so you need to select this here also.

Press on the Apply button on the bottom of this page (just scroll this page a little further) and the router is configured!

All requests for <public IP address>:8000 now are serviced by the port which is on address 192.168.2.70:8000; in

this case the icecast2 server from the SAS100.

After this short excursion we will proceed with configuring the SAS100 by pressing on the Audio button.

Table des matières

Autres manuels Streamit Convertisseur de média

Streamit

Streamit SAS310 Manuel utilisateur

Streamit

Streamit Maven Manuel utilisateur

Streamit

Streamit SAS310 Manuel utilisateur

Streamit

Streamit Maven Manuel utilisateur

Streamit

Streamit SAS220 Manuel utilisateur

Streamit

Streamit Lisa Compact Manuel utilisateur

Manuels Convertisseur de média populaires d'autres marques

SoundTraxx

SoundTraxx Blunami BLU-2200 Manuel utilisateur

SPROLINK

SPROLINK VA1 Manuel utilisateur

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manuel utilisateur

Nikon

Nikon AF-S TC-20E III Manuel utilisateur

Axis

Axis AXIS Q7406 Manuel utilisateur

Omega

Omega TAC80B-J Manuel utilisateur

Zoom

Zoom Thunderbolt TAC-2R Manuel utilisateur

OST

OST iConverter 10/100M Manuel utilisateur

Vertiv

Vertiv Netsure Manuel utilisateur

birddog

birddog MINI Manuel utilisateur

Roland

Roland GI-10 Manuel utilisateur

Wallenstein

Wallenstein WX310 Manuel utilisateur

Pace

Pace MSS 200-1 Manuel utilisateur

Solar Converters

Solar Converters EQ 12/24-50 Manuel utilisateur

CYP

CYP EL-7400V Manuel utilisateur

TIE

TIE MIDI 1i1o Manuel utilisateur

DCS

DCS Vivaldi Upsampler Manuel utilisateur

Westermo

Westermo MCW-211 SERIES Manuel utilisateur