Storm UNIQUE 2.1 Manuel utilisateur
TECHNICAL SERVICES FOR
EVENTS, THEATRE, MUSIC,
EXHIBITION, FILM & TV
01483 757211
HIRE@STORMLTD.CO.UK
WWW.STORMLTD.CO.UK
1
Operating manual
aLook Solutions product
UNIQUE 2.1
2
Set of Equipment supplied
– 1 Unique 2.1
– 1 tank lid with quick connector, silicon tube and air valve filter
– 1 canister of UNIQUE-fluid, 2l
– 1 manual
As an option:
– XLR remote for analogue control (delivered without cable)
– Diverter
– Flightcase
– Hanging set
Please check whether all the products you ordered are supplied.
3
Contents
1. Introduction 4
2. Safety instructions 5
3. Description of the parts 6
4. Fluid 7
4.1 General notes 7
4.2 Changing the fluid canister 7
4.3 Storage of the fluid 7
5. Operating the Unique 2.1 9
5.1 Selecting the location 9
5.2 Putting into operation 9
5.3 Switching the device off 10
5.4 Control choices 10
5.4.1 Control via DMX 512
5.4.1.1 Adjusting the DMX start address
5.4.1.2 Adjusting the pump and the fan
5.4.2 Control via 0 - 10 Volt (+) DC
5.4.2.1 Adjusting the pump and the fan
5.4.3 Stand alone mode
5.4.3.1 Adjusting the pump and the fan
5.4.4 Control via Haze-Density Control System (HDCS)
5.4.4.1 Using the Profile
5.4.5 Working with the internal Timer
5.4.5.1 Autostart
5.5 Wiring of the sockets 16
6. Cleaning, Care and Maintenance 17
7. Troubleshooting 17
8. Specifications 18
9. Warranty conditions 19
4
1. Introduction
The haze machine Unique 2.1 offers various new features, which open new fields of
operation to the user.
With its variable output, the machine can be used in many fields of operation. Any
desired effect can be achieved: from the finest mist to a thick haze, similar to fog.
Therefore the Unique 2.1 is able to fill rooms or halls with a constant haze, creating the
right atmosphere and is providing excellent support for lighting effects.
The pump and the fan are fully and separately controllable, giving the Unique 2.1 a
good level of noise reduction. The machine can therefore be used in fields of operation
where any sound is undesirable or causes disturbance.
The ready-mixed fluid, available in canisters of 2 litres, guarantees a trouble-free
working and continuous output for up to 50 hours.
The warm up time is extremely short (max. 1 min.)
With its power requirement of 1500 watt the Unique 2.1 is very powerful.
5
2. Safety instructions
A fog machine is not a toy!
© l{~{w{yw{|~{{DZw}{|}{}xD
© eyyww{~z{|£zw{yw{~{{wD
Thus never aim at persons directly and keep a minimum distance of 3 m (9.8 ft) to
the nozzle.
© d{{y~~{{~{{wDZw}{|}{}xD
© j~{ yw | ~{ wy~{ x{ C£wwx{B Cyxx{ wz
sensitive to heat. It has to be twice as big as the machine.
© a{{wzwy{|LFy>GDO|?w£wwx{Byxx{x{y
and objects sensitive to heat.
© ]ywy~wzx~w}~x~Bwx{£w{Dd{{
the fog at strong sources of ignition like fire or pyrotechnic effects.
© d{{{~{wy~{wz{w{~{wy~{w{z{z~{y{y{zw
power supply.
© j~{x~wx{{~wH>LDK|?~{{{{wwzD
© e{~{{z«kd_gk[C£zDZ||{{{|£zz}{{w{~{
fog you require and destroy your fog generator.
© Zw~{|}£zDa{{ww|y~z{D_yw{|{{ywyB
rinse with a lot of water. Consult a doctor should you have accidentally swallowed
some fluid.
© i{z£zw~{z£zz{ywyw{~wwzDc~{£zwz
dispose of it according to regulations. UNIQUE-fluid is completely water-soluble and
biodegradable.
© \}wwyw{{z{{yD
Artificially-made fog can be produced in many different ways. The method used here
to produce fog, with a device which works according to the vaporizer principle, is the
most harmless one.
No case has so far been reported in which a sound human being has been harmed be-
cause of using our device to produce artificial fog. However, this can only be guaranteed
if the professional fog generators are used accordingly, i.e. at the correct vaporization
temperatures as well as with the correctly mixed fog fluid.
We, however, recommend: People with health problems or problems of the respiratory
tract or with an inclination for allergies should avoid any contact with artificially-made
fog.
6
3
1
4
5
Serial no.
P25
230 V~/50 Hz/1500 W
Made by OTTEC Technology GmbH for Look Solutions. Made in Germany.
ANALOGIN DMX
This machine has been designed to be used with original Look Unique-fluid. Use
of other liquids will void the manufacturer's warranty and can be dangerous to
your health. Never usecleaner or fragrances with this machine!
UNIQUE 2.1
Serial no.
Rear view
2
6
Front view
7: · Nozzle
Vapour and nozzle area
extremely hot. Do not touch!
Do not cover the nozzle area
and do not connect a ducting!
Vapour and nozzle area
extremely hot. Do not touch!
Do not cover the nozzle area
and do not connect a ducting!
UNIQUE 2.1
Look Solutions
3. Description of the parts
1: · Mains cable
2: · XLR sockets for DMX in/out
3: · XLR socket for 0-10 V (+) DC
4: · Fluid tube inlet
5: · Fluid tube
6: · Control panel for adjusting
the DMX start address and
the output
7
3. Description of the parts
11
10
12
9
13
Tank lid
9: · Brass collar
10: · Tank lid
11: · Brass coupling
12: · Fluid filter
13: · Check valve
8
4.3 Storage of the fluid
j~{kd_gk[C\zw~}~yy{w{z£zDoyw{|w{}
period.
– Disconnect the fluid tube from the lid by retracting the brass collar [9] and removing
the brass coupling [11].
– Remove the container from the tank housing of the Unique 2.1.
– Unscrew the lid [10] of the empty container and screw it onto the new container.
– Place the full container into the tank housing.
– Push the brass coupling [11] into the brass collar [9], until you hear a click. The brass
collar is now locked firmly.
4. Fluid
4.2 Changing the fluid bottle
The ready-to-use UNIQUE-Fluid for use in the Unique 2.1 is available in 2 litre canisters
from your local dealer. Fluid also comes in 10 and 25 litre canisters and barrels with
220 litres.
j}ww{{x{C|{{{w~{{ywkd_gk[C\zx{{zD
Use of other liquids will void the manufacturer‘s warranty and can be dangerous to
your health.
PLEASE NOTE: The vaporizer of our machines does not have to be cleaned! Cleaners,
available on the market, can damage the vaporizer! We cannot grant warranty in this
case.
4.1 General notes
9
From the finest mist to a thick haze, similar to fog, any desired effect can be achieved.
These haze effects form slowly so that the device should be switched on some time
before the lighting or the laser start to operate.
Important: Do not connect a ducting to the nozzle of the Unique 2.1. If a ducting is
connected directly to the machine the haze will be pushed back into it. This may damage
the machine. We cannot grant warranty in this case!
5.1 Selecting the location
The location in which the Unique 2.1 is to be operated must
– be dry,
– be free from dusty or polluted air,
– be free from vibrations,
– be a non-flammable place or surrounding,
– be well-ventilated with haze-free air keeping the ambient operating temperature
between 10° C and 40° C (50° F and 105° F) and the relative humidity below 80%.
5. Operating the Unique 2.1
5.2 Putting into operation
Warning: Never connect the Unique2 to a dimmer or switchpack! This may destroy
the machine.
a. Connect the power plug to the mains supply. Make sure
the correct voltage is selected.
A P and two figures appear on the LED-display [17].
b. After 60 Seconds, the Unique 2.1 is heated up. Press the Enter-button [16] once to
start the haze process. The green Active-LED [18] will be lit. After a short delay the
machine begins to haze.
After 30 Seconds the display will go dark. To re-activate it, press one of the buttons
on the display.
P25
Table des matières
Manuels Matériel de DJ populaires d'autres marques
thomann
thomann Stairville DJ Lase 40-G MK-III Manuel utilisateur
Eagletone
Eagletone 6 Eyes Flower Manuel utilisateur
EuroLite
EuroLite FLD-1508 Manuel utilisateur
Technical Pro
Technical Pro LG8xSEA Manuel utilisateur
JB Systems
JB Systems Lounge Laser DMX Manuel utilisateur
Lightmaxx
Lightmaxx Vega Halo 90 Manuel utilisateur
Elation
Elation FUZE WASH Z350 Manuel utilisateur
Maverick
Maverick MK3 WASH Manuel utilisateur
Infinity
Infinity TF-260C7 Fresnel Manuel utilisateur
Chauvet
Chauvet EVE E-50Z Manuel utilisateur
Eliminator Lighting
Eliminator Lighting E 138 Manuel utilisateur
EuroLite
EuroLite Mini Multicolor LED Flashing Light SC Manuel utilisateur