Model Number STS2401
customercare@winplus.com.au
Warnings
1. Read all instructions before operating the Steam Station Iron for the rst time.
2. This appliance is intended to be used in household and similar applications such as:
– staff kitchen areas in shops, ofces and other working environments;
– farm houses;
– by clients in hotels, motels and other residential type environments; bed and
breakfast type environments.
3. Do not use the appliance for other than intended or specied purposes.
4. Only use the Steam Station Iron with Australian Standard 220-240V AC 50/60Hz 10A
rated power supply.
5. To avoid electrical shock, do not place the cord, plug or Steam Station Iron in water
or other liquids.
6. Do not operate appliance with wet hands or operate in a wet working environment.
7. Keep the Steam Station Iron and power cable away from heat sources and hot
surfaces.
8. Always protect the power cable from undue exing and wearing – do not allow the
cable to hang off edge of the counter or table.
9. If the supply cord is damaged, do not use the product. Contact customer service for
repair or replacement.
10. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
11. Do not leave your Steam Station Iron unattended when power is connected.
12. Do not use this appliance with an external timer or separate remote-control system
of any kind.
13. Do not ll the container above its maximum indicated level.
14. Take caution of hot surfaces when product is in use.
15. Do not direct steam from the iron towards any persons or combustible items.
16. Do not leave hot iron soleplate in contact with any material whilst unattended.
17. The plug must be removed from the power point before the water tank is lled with
water.
18. The iron must be used and rested on a at, stable surface.
19. When placing the iron on its stand, ensure that the surface on which the stand is
placed is stable.
