
05
AFTER SALES SUPPORT
1300 777 137
MODEL: IA3833 PRODUCT CODE: 707199 12/2021
General Information & Safety Instructions
Read this manual thoroughly before first use, even if you are familiar with this type of product. The
safety precautions enclosed herein reduce the risk of fire, electric shock and injury when correctly
adhered to. Please keep this instruction manual in a safe place along with your purchase receipt and
carton for future reference. If applicable, pass these instructions and packaging on to the next owner
of the appliance. Always follow basic safety precautions and accident prevention measures when
using an electrical product.
Pay particular attention to messages that follow this safety alert symbol or the words
DANGER, WARNING or CAUTION. These words are used to alert you to a potential
hazard that can seriously injure you and others. The instructions will tell you how to reduce
the chance of injury and let you know what can happen if the instructions are not followed.
This symbol alerts you to take care as the appliance contains flammable materials:
isobutane as refrigerant and cyclopentane as insulation blowing gas. While isobutane
(R600a) is a gas with a high level of environmental compatibility, it is nevertheless
flammable. Do not expose the appliance to high heat, sparks and open flames.
Electrical Safety and Cord Handling
1. Read all instructions before using the Stirling® 1.5L Ice Cube Maker.
2. Before turning on the Ice Cube Maker ensure the electrical voltage and frequency of the circuit
corresponds to those indicated on the rating label of the product.
3. Do not use an extension cord unless completely necessary with the Ice Cube Maker. If an
extension cord is used, please ensure that it has a rating equal or exceeding the rating of this
product.
4. Do not pull or carry by the cord, use the cord as a handle, close a door on the cord, or pull the
cord around sharp edges or corners. Keep the cord away from heated surfaces.
5. Do not bend or damage the power cord and never force the plug into an outlet.
6. Always switch o and unplug the Ice Cube Maker when not in use. To disconnect from the
power supply, grip the plug and pull from the power outlet. Never pull by the cord. The plug
must be removed from the power outlet before cleaning, servicing, maintenance or moving the
Ice Cube Maker.
7. Do not move or lift the Ice Cube Maker while the power cord is still connected to the power
outlet or still on. Always ensure it is unplugged and has cooled down before moving.
8. Do not use the Ice Cube Maker if the plug, cord, or the Ice Cube Maker itself is damaged.
Please contact our After Sales Support line for further advice.
9. Unless your home is already fitted with a residual current device (safety switch), we
recommend installing an RCD with a rated residual operating current not exceeding 30mA to
provide additional safety protection when using electrical appliances. See your electrician for
professional advice.