Li Operaon
Using the Li from Inside
the Car
1. When entering the li, the lights come on
automacally. Stand (or sit) in the li facing
the opening.
2. Close the door and make sure that you
are not obstrucng the safety light curtain
across the li entrance. If obstructed, the li
will not travel (See page 6).
3. If the load is greater than specied for
this li (170kg) the overload light will be
illuminated (See page 6). The li will not
move unl the weight is reduced.
4. Ensure any passengers or items travelling
with you are fully contained within the li
ca r.
5. Select the desired direction (See page 6).
Depress and hold the appropriate button
for travelling up or down. The lift will move
while the button is depressed.
6. Hold the buon down unl the li stops
at its desnaon.
7. If you see an unsafe situaon, release
the buon and either wait unl it is safe to
connue or return to the oor from which
you came.
Calling the Li with the
Remote Control
You can posion the two remote controls
anywhere around your home and these
allow you to control the li, and to call it
when it's parked on the other level. The
remote control can be used to move the li
to the desired oor.
1. If possible, rst check to make sure that
nobody is inside the li trying to operate it
from within.
2. Press the call buon on the remote
control and keep it pressed unl the li has
come to a stop on the desired oor. Please
note: you can stop the li at any me by
releasing the buon.
3. If the li encounters an obstrucon when
being called either up or down, it will stop.
If this occurs, reverse the direcon the li
is travelling in and return it to the starng
point. Clear the obstrucon, and as soon
as the obstacle has been removed from
the operaon area, the li will connue its
journey.
10
