STI PR-8023 Manuel utilisateur

PR-8023

Product May Vary Slightly From Picture.

Version: II

Exercise can present a health

risk. Consult a physician before

beginning any exercise program

with this equipment.

If you feel faint or dizzy,

immediately discontinue use of

this equipment. Serious bodily

injury can occur if this

equipment is not assembled

and used correctly. Serious

bodily injury can also occur if all

instructions are not followed.

Keep children and pets away

from equipment when in use.

Always make sure all bolts and

nuts are tightened prior to each

use. Follow all safety

instructions in this manual.

WARNING

CAUTION:

Weight on this product should not exceed 181 kgs/ 400 lbs

MADE IN TAIWAN

OWNER’S MANUAL

UPRIGHT BIKE

SAFETY INSTRUCTIONS

WARNING:Toreducethe riskofserious injury,readthefollowingSafetyInstructionsbeforeusingthe

UPRIGHTBIKE.

1.ReadallwarningspostedontheUright Bike.

2.ReadthisOwner'sManualandfollowitcarefullybeforeusingtheUrightBike. Makesurethatitisproperlyassembledand

tightenedbeforeuse.

3.Werecommendthattwopeoplebeavailableforassemblyofthisproduct.

4.KeepchildrenawayfromtheUright Bike. DonotallowchildrentouseorplayontheUrightBike. Keepchildrenandpets

awayfromtheUrightBikewhenit isinuse.

5.Itisrecommendedthatyouplacethisexerciseequipmentonanequipmentmat.

6.SetupandoperatetheUrightBikeonasolidlevelsurface.DonotpositiontheUrightBikeonlooserugsoruneven

surfaces.

7.InspecttheUrightBikeforwornorloosecomponentspriortouse.

8.Tighten/replaceanylooseorworncomponentspriortousingtheUrightBike.

9. Consultaphysicianpriortocommencinganexerciseprogram.If,atanytimeduringexercise,youfeelfaint,dizzy,or

experiencepain,stopandconsultyourphysician.

10. Followyourphysician'srecommendationsindeveloping your ownpersonalfitness program.

11. Alwayschoosetheworkoutwhichbestfitsyour physicalstrengthandflexibilitylevel.Knowyourlimitsandtrainwithinthem.

Alwaysusecommonsensewhenexercising.

12.Beforeusingthisproduct,pleaseconsultyourpersonalphysicianforacompletephysicalexamination.

13. DonotwearlooseordanglingclothingwhileusingtheUright Bike.

14. Neverexerciseinbarefeetorsocks;alwayswearcorrectfootwear,suchasrunning,walking,orcross-trainingshoes.

15. Becarefultomaintainyourbalancewhileusing,mounting,dismounting,orassemblingtheUright Bike,lossofbalance

mayresultinafallandseriousbodilyinjury.

16. KeepbothfeetfirmlyandsecurelyontheFootPedalswhileexercising.

17. TheUrightBikeshouldnotbeusedbypersonsweighingover400 pounds /181kgs.

18. TheUrightBikeshouldbeusedbyonlyonepersonatatime.

19.UsetwopeopletoassembleandmovetheUrightBike.

20.Maintenance:Replacethedefectivecomponentsimmediatelyand/orkeeptheequipmentoutofuseuntilrepairthe

equipmentcompletely.

21.MakesurethatadequatespaceisavailableforaccesstoandpassagearoundtheUrightBike;keepatleastadistanceof

1meterfromanyobstructionobjectwhileusingthemachine.

22. TheUrightBikeiswell-suitedtocommercialusage.

WARNING:Beforestartinganyexerciseorconditioningprogramyoushouldconsultwithyourpersonalphysiciantoseeif

yourequireacompletephysicalexam.Thisisespeciallyimportantifyouareovertheageof35,haveneverexercisedbefore,

arepregnant,orsufferfromanyillness.

READ ANDFOLLOW THESAFETYPRECAUTIONS.FAILURE TO FOLLOW THESE

INSTRUCTIONSCANRESULTINSERIOUSBODILYINJURY.

“BEFORE YOU BEGIN”

Thank you for choosing the UrightBike. We take

great pride in producing this quality product and hope

it will provide many hours of quality exercise to make

you feel better, look better and enjoy life to its fullest.

Yes, it's a proven fact that a regular exercise

program can improve your physical and mental health.

Too often, our busy lifestyles limit our time and

opportunity to exercise. The Uright Bike provides a

convenient and simple method to begin your assault

on getting your body in shape and achieving a

happier and healthier lifestyle.

Before reading further, please review the drawing

below and familiarize yourself with the parts that are

labeled. Read this manual carefully before using the

UrightBike.

THE FOLLOWING TOOLS ARE INCLUDED FOR ASSEMBLY:

T-HAND SOCKET

WRENCH (17mm)

SOCKET WRENCH

(13mm)

WRENCH (17mm)

PHILLIPS

SCREWDRIVER (6mm)

Console

Seat

Handlebar

Pulse Sensor

Pedal

Main Frame

Transportation Wheels

Leveler

Rear Stabilizer

Upright Post

Adjustment

Bar

Hand Wrist Pad

Accessory

Tray

“HARDWARE IDENTIFICATION CHART”

Unpack the box in a clear area. Use the List of Hardware below to check the contents of the hardware kit. This chart is

provided to help identify the hardware used in the assembly process. Place the washers, the end of bolts, or screws on the

circles to check for the correct diameter. Use the ruler to check the length of the bolts and screws.

NOTICE: The length of all bolts and screws except those with flat heads is

measured from below the head to the end of the bolt or screw. Flat head

bolts and screws are measured from the top of the head to the end of the

bolt or screw.

After unpacking the unit, open the hardware bag and make sure that you have all the following items. If a part is not in the

hardware bag, check to see if it has been pre-assembled.

HARDWARE KIT

Part No. and Description

Q’TY

74 Lock Washer (M8)

76 Washer (8x38x2.0t)

85 Screw (M4x20mm)

87 Bolt (M5xp0.8x15mm)

99 Bolt (M8xp1.25x65mm)

101 Bolt (M10xp1.5x25mm)

102 Bolt (M6xp1.0x12mm)

ALLEN WRENCH

(5 mm)

“ASSEMBLY PARTS”

Unpack the box in a clear area. Follow the List of Assembly Parts below to check and make sure all assembly parts are

present and in good condition. Do not dispose of the packing material until the assembly process is completed. Assembly

tools and hardware kit have included for you to use when assembling the product

Console

Console Bracket

Handlebar Decoration

Cover

Hand Wrist Pad

Accessory Tray &

Support Pad

Pedal

Leveler

Handlebar Assembly

Upright Post Sleeve

Upright Post Assembly

Front and Rear Stabilizer

Main Frame

“ASSEMBLY INSTRUCTIONS”

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all packing materials

from your area and place them back into the box. Do not dispose of the packing materials until assembly is completed.

Read each step carefully before beginning.

STEP 1–Leveler & Stabilizer Assembly

a. Attach 4pcs Levelers (19) to the Front Stabilizer (2) and the Rear

Stabilizer (3).

b. Be sure to tighten the Levelers (19)securely against the Stabilizers

(2, 3) until screw lines are eliminated as the drawing 1 shown on the top

right corner.

c. In order to assemble the Stabilizer (2, 3) smoothly, it is suggested to place

one Styrofoam (or any stationary object) under one side of the Main Frame

(1).

Detailed Lever- drawing 1

Detailed Lever- drawing 2

LEVELING: After placing the

equipment in the intended

location for use, check the

stability of the equipment. If the

equipment is not level,

reviewing the following

direction:

Loosen the Leveler (19) to

make the Adjustment Plate

become less tight.

Adjust the Leveler (19) for

leveling.

Tighten the Adjustment Plate

securely against the Stabilizer

to lock the Leveler (19) in stable

position as the drawing 2

shown.

Stabilizer

Adjustment Plate

Leveler (19)

Adjustment Plate

Stabilizer

Leveler (19)

Screw line

d. Attach the Front Stabilizer (2) onto the Main Frame (1) and secure with 2pcs Washers (8x38x2.0t)(76), 2pcs Lock

Washers (M8)(74) and 2pcs Bolts (M8Xp1.25x65mm)(99).

e. Attach the Rear Stabilizer (3) onto the Main Frame (1) and secure with 2pcs Washers (8x38x2.0t)(76), 2pcs Lock

Washers (M8)(74) and 2pcs Bolts (M8Xp1.25x65mm)(99). NOTE: If the item is not level, review the LEVELING

NOTE on the right side to level the Levelers (19).

“ASSEMBLY INSTRUCTIONS”

STEP 2 –Connection Wire Assembly

a. Plug the Middle Connection Wire (113)into the Lower Connection Wire (114). Be careful not to pinch the wires.

STEP 3 –Upright Post Assembly

a. Refer to FIG. 1, check that 2pcs Nylock Nuts (M10xp1.5)(109) have preassembled into the front of the Main Frame (1)

(they will not be tight so that slotted bracket of the upright post will slide between the nut and the frame).

b. Insert the Upright Post (5) into the Main Frame (1) and secure with 2pcs Bolts (M10xp1.5x25mm)(101)

by using the T-HEAD SOCKET WRENCH as shown. Then fully tighten with 2pcs Nylock Nuts

(M10xp1.5)(109).

STEP 4 –Upright Post Sleeve Assembly

NOTE: Do not remove

the Nuts (109) during

assembly.

a. Attach the Right Upright Post Sleeve (39) on the Upright Post (5) and secure with 2pcs Bolts

(M5xp0.8x15mm)(87).

b. Attach the Left Upright Post Sleeve (38) on the Upright Post (5) and secure with 2pcs Bolts (M5xp0.8x15mm)(87)

and one Screw (M4x20mm)(85).

STEP 5 –Connection Wire and Console Assembly

a. Plug the Upper Connection Wire (112)into the Middle Connection Wire (113). Be careful not to pinch the wires.

b. Plug the Upper Pulse Sensor Wire (118)into the Middle Pulse Sensor Wire (119). Be careful not to pinch the wires.

c. Place the Console (31) onto the Upright Post (5) and secure with 4pcs Bolts (M5xp0.8x15mm)(87).

“ASSEMBLY INSTRUCTIONS”

STEP 6 –Pulse Sensor Wire Assembly

a. Plug the Middle Pulse Sensor Wire (119)into the Lower Pulse Sensor Wire (120). Be careful not to pinch the wires.

STEP 7 –Handlebar, Console Sleeve and Decoration Cover Assembly

NOTE: For shipping purpose, 4pcs Bolts (M8xp1.25x16mm)(95) and 4pcs Lock Washers (M8)(74) are attached on the

Upright Post Assembly (5).

a. Remove 4pcs Bolts (M8xp1.25x16mm)(95) and 4pcs Lock Washers (M8)(74) from the Upright Post Assembly (5).

b. Insert the Handlebar (6) into the Upright Post Assembly (5) and secure with 4pcs Bolts (M8xp1.25x16mm)(95) and

4pcs Lock Washers (M8)(74).

c. Attach the Console Sleeve (33) to the Console (31) and secure with 4pcs Bolts (M5xp0.8x15mm)(87).

d. Attach the Upper Handlebar Decoration Cover (34) and the Lower Handlebar Decoration Cover (35) to the

Upright Post Assembly (5) and secure with 3pcs Screws (M4x20mm)(85) and 2pcs Bolts (M5xp0.8x15mm)(87).

“ASSEMBLY INSTRUCTIONS”

STEP 8 –Hand Wrist Pad Assembly

a. Attach the Hand Wrist Pad (28) to the Handlebar (6) and secure with 2pcs Bolts (M6xp1.0x12mm)(102).

STEP 9 –Accessory Tray & Pedal Assembly

NOTE: For shipping purpose, 2pcs Bolts (M5xp0.8x25mm)(88) are attached on the Upright Post Assembly (5).

a. Place the Accessory Tray Support Pad (36) and Accessory Tray (37) on the Upright Post Assembly (5) and

secure with 2pcs Bolts (M5xp0.8x25mm)(88).

b. Thread the Right Pedal (12)clockwise onto the Right Crank located inside the Right Crank Cover (10)as shown.

Tighten the pedal securely. Repeat the same procedure to thread and tighten the Left Pedal (11) counter-clockwise

onto the Left Crank as shown.

For the final step, make sure all the bolts and nuts are tighten securely before using.

“OPERATIONAL INSTRUCTIONS”

HOW TO ADJUST CONSOLE ANGLE

To get the best console angle, it’s suggested to use both hands to hold the upper and

lower end of the console (area A or B) and gently adjust the console angle to the proper

position

SEAT POST ADJUSTMENT

USER CAN ADJUST THE SEAT HEIGHT WHILE BE SEATED

While be seated, pull the Adjustment Bar (23) up to adjust the

seat height.

Seat downward to lower the seat height or slight move the body

upward to raise the seat height.

Once adjusting to the proper position, release the Adjustment

Bar (23) until hearing the “click”sound.

HOW TO TWO THE ITEM SAFELY

Hold the Rear Stabilizer up with two hands and tow the item to

the desired place carefully

Make sure the floor is level while towing the item

Table des matières

Autres manuels STI vélo d'appartement

STI

STI PR-8223 Manuel utilisateur

Manuels vélo d'appartement populaires d'autres marques

Weslo

Weslo Vector 302 Guide de démarrage rapide

TOORX

TOORX BRX85 Manuel utilisateur

Matrix

Matrix KranKcycle Manuel utilisateur

Matrix

Matrix IC3 Manuel utilisateur

Sunny Health & Fitness

Sunny Health & Fitness SF-B121021 Manuel utilisateur

Monark

Monark 827E Manuel utilisateur

Stamina

Stamina 1310 Manuel utilisateur

American Fitness

American Fitness SPR-BK1072A Manuel utilisateur

Cateye

Cateye CS-1000 (CYCLO SIMULATOR) Manuel utilisateur

BH FITNESS

BH FITNESS H9158H Manuel de l'opérateur

Body Sculpture

Body Sculpture BC-7220G Manuel utilisateur

Cateye

Cateye EC-2300 Manuel utilisateur

FYTTER

FYTTER RACER RC MSR Manuel utilisateur

Kikos

Kikos HM-9090M Manuel utilisateur

Pro-Form

Pro-Form 345 Zlx Bike Guide de l'utilisateur

Fuel Fitness

Fuel Fitness SU135-40 Manuel utilisateur

NordicTrack

NordicTrack Gxr 4.2 Bike Manuel utilisateur

Vision Fitness

Vision Fitness U70 Manuel utilisateur