Stevens Aero Model FreDe 2X Manuel

FREDe 2X

A toonscaletm giant by Stevens AeroModel

Wing Span: 55 inches | Wing Area: 1050 square inches | Average Flying Weight: 72 ounces

Build Instructions - Version 1.24 (revised 3.02.2015)

Build Instructions

WARRANTY

Stevens AeroModel guarantees this kit to be free from defects in both material and workmanship at the

date of purchase. This warranty does not cover any component parts damaged by use or modification.

In no case shall Stevens AeroModel’s liability exceed the original cost of the purchased kit. Further,

Stevens AeroModel reserves the right to change or modify this warranty without notice.

LIABILITY RELEASE

In that Stevens AeroModel has no control over the final assembly or material used for final assembly,

no liability shall be assumed nor accepted for any damage resulting from use by the user. By the act of

using the user-assembled product, the user accepts all resulting liability.

If the buyer is not prepared to accept the liability associated with the use of this product, the buyer is

advised to return this kit immediately in new and unused condition to the place of purchase.

THIS PRODUCT IS NOT INTENDED FOR CHILDREN 12 YEARS OF AGE OR YOUNGER.

WARNING: This product may contain chemicals known to the state of California to cause cancer

and/or birth defects or other reproductive harm.

PRODUCT SUPPORT

This product has been engineered to function properly and perform as advertised, with the suggested

power system and supporting electronics as outlined within this product manual. Product support

cannot be provided, nor can Stevens AeroModel assist in determining the suitability or use of

electronics, hardware, or power systems not explicitly recommended by Stevens AeroModel.

For product assembly support, replacement parts, hardware, and electronics to complete this model,

please contact Stevens AeroModel at www.stevensaero.com.

Stevens AeroModel

26405 Judge Orr Rd., Colorado Springs, CO 80808 USA

719-387-4187 www.stevensaero.com

Build Instructions

Kit Contents

☐Laser cut wood (42 Sheets - See inventory on following pages)

☐Pre-bent landing gear

☐Foam Wheels, 4 1/2 in. diameter [DAV5745] (Trexler #11 wheels as illustrated are optional)

☐Printed Materials Bag

Illustrated Build Instructions

Detail Sheets (3 Pages 1:1 plans are not required product assembly)

Pre-Cut Profile Pilot, color (3 Pages Left, Right, and Instrument Panel)

Foam Cockpit Combing

☐Long Hardware Bag

1 - Pushrod System, Micro2 [DUB922]

1 - Wire, .075 x 24 in.

1 - Aluminum Tubing, 1/8 in. x 12 in.

1 - Leading Edge stock, 1/2 in. square x 48 in. balsa

2 - Main Spar Cap Strip stock, 3/8 in. square x 48 in. balsa

2 - Sub Spar stock, 1/8 in. x 1/4 in. x 48 in. balsa

3 - Turbulator Spar stock, 1/4 in. square x 48 in. balsa

☐Large Hardware Bag (4 x 6 in.)

1 - Landing Gear Block, hardwood [SIGSH125]

1 - Landing Gear Lug, hardwood dowel 1/4 in. x 6 in. [*]

1 - Tail wheel, foam, 1 3/4 in. diameter [DUB175SL]

2 - Control Horns [HAN3611]

4 - Wheel retainers, Dura-Collars [DUB140]

6 - Rubber Bands, #32

☐Small Hardware Bag (2 x 3 in.)

1 - E/Z Connector Keeper (1 in. length silicone fuel line)

3 - Wing Pin and Tailwheel Retainers, rubber [4015]

4 - Blind Nuts, Motor Mount 4-40 [3001]

4 - Neo Magnets, 3/16 in. diameter x 1/16 in. thickness [4014]

8 - CA Hinges [4024]

Suggested Electronics

☐Transmitter and receiver capable of 3 channel control

☐2 - Hitec HS322HD Servos

☐E-flite Power 32 Motor [EFLM4032A] and APC 15 x 8E Propeller [APC15080E]

☐Thunderbird 54 - 54 Amp ESC [CSETB54]

☐Hyperion G3 11.1V 3300mAh 3 cell LiPo Battery [HP-LG325-3300-3s]

Build Instructions

Building Supplies and Tools

☐1 oz. Medium CA Glue

☐1 oz. Thick CA Glue

☐1 oz. Thin CA Glue

☐CA glue accelerator (kicker)

☐CA glue de-bonder

☐30 min. Epoxy

☐Rubbing Alcohol (Epoxy Clean-up)

☐Balsa filler

☐Hobby Knife with ample supply of #11 blades

☐Sanding block with 400 and 600 grit paper

☐Heat Gun and Covering Iron

☐Small Needle Nose Pliers

☐Wire Cutters

☐Small Round “Rat-Tail” file

☐2.5mm Hex Head Wrench

☐Small Hammer

☐Scissors

☐ZONA 4 in 1 Saw Set [ZON35251]

☐DUBRO Hinge Slotter Kit [DUB660]

☐24 in. Straight Edge

☐Selection of Small Drills and Screwdrivers

☐Two 1/8 in drill bits.

☐1 in. x 12 in. length sticky back velcro

☐3/4 in. wide clear tape

☐3 Rolls AeroFilm Covering

☐1 Roll AeroTRIM Self-Adhesive Trim

☐Paper Towels

☐Enamel Paint Marker - Black [TES2547C]

☐Long sanding bar

☐Razor Plane

☐Small Spring Loaded Clamps

☐Low Tack Painters Masking Tape

☐3M 77 or Glue Stick for Profile Pilot

☐DEFT Clear Lacquer Spray

Laser Cut Parts Inventory

Build Instructions

FREDe2X-01/42

FREDe2X-02/42

FREDe2X-03/42

FREDe2X-04/42

FREDe2X-05/42

FREDe2X-06/43

Laser Cut Parts Inventory

Build Instructions

FREDe2X-07/42

FREDe2X-08/42

FREDe2X-09/42

FREDe2X-10/42

FREDe2X-11/42

FREDe2X-12/43

Laser Cut Parts Inventory

Build Instructions

FREDe2X-13/42

FREDe2X-14/42

FREDe2X-15/42

FREDe2X-16/42

FREDe2X-17/42

FREDe2X-19/42

Laser Cut Parts Inventory

Build Instructions

FREDe2X-19/42

FREDe2X-20/42

FREDe2X-21/42

Laser Cut Parts Inventory

Build Instructions

FREDe2X-22/42

FREDe2X-23/42

FREDe2X-24/42

FREDe2X-25/42

FREDe2X-26/42

FREDe2X-27/42

Laser Cut Parts Inventory

Build Instructions

FREDe2X-28/42

FREDe2X-29/42

FREDe2X-30/42

FREDe2X-31/42

FREDe2X-32/42

FREDe2X-33/42

Laser Cut Parts Inventory

Build Instructions

FREDe2X-34/42

FREDe2X-35/42

FREDe2X-36/42

FREDe2X-37/42

FREDe2X-38/42

FREDe2X-39/42

Table des matières

Autres manuels Stevens Aero Model Jouet

Stevens Aero Model

Stevens Aero Model GYM-E Manuel utilisateur

Stevens Aero Model

Stevens Aero Model Swift 100 Manuel

Stevens Aero Model

Stevens Aero Model ToonSCALE FREDe Manuel utilisateur

Stevens Aero Model

Stevens Aero Model Swift 100 Manuel du propriétaire

Stevens Aero Model

Stevens Aero Model Stella Manuel utilisateur

Stevens Aero Model

Stevens Aero Model G-480 Manuel utilisateur

Stevens Aero Model

Stevens Aero Model CAP23240e Manuel utilisateur

Stevens Aero Model

Stevens Aero Model SQuiRT-700 Manuel utilisateur

Stevens Aero Model

Stevens Aero Model Farman Carte Postale Post Card Manuel du propriétaire

Stevens Aero Model

Stevens Aero Model SQuiRT Manuel utilisateur

Stevens Aero Model

Stevens Aero Model Fokker D.VII Manuel

Stevens Aero Model

Stevens Aero Model Build It! Baby Ace Manuel

Stevens Aero Model

Stevens Aero Model Build It! FullHouse 500 Manuel

Stevens Aero Model

Stevens Aero Model SHAFT25e Manuel utilisateur

Stevens Aero Model

Stevens Aero Model SHAFT S400 Manuel utilisateur

Stevens Aero Model

Stevens Aero Model SkyBuggy Manuel utilisateur

Stevens Aero Model

Stevens Aero Model SCRAM! Manuel utilisateur

Stevens Aero Model

Stevens Aero Model Fly Baby Bipe Manuel

Stevens Aero Model

Stevens Aero Model QuickOats 250 Manuel

Stevens Aero Model

Stevens Aero Model rockette 100 Manuel

Stevens Aero Model

Stevens Aero Model 1911 Nieuport Manuel

Stevens Aero Model

Stevens Aero Model LiddleRod 2.4 Manuel utilisateur

Stevens Aero Model

Stevens Aero Model GRANGER 1930 ARCHAEOPTERYX Manuel

Stevens Aero Model

Stevens Aero Model Built It! Daddy-O 525 Manuel

Manuels Jouet populaires d'autres marques

marklin

marklin 37321 Manuel utilisateur

Canon

Canon PAPER CRAFT Manuel utilisateur

GREAT PLANES

GREAT PLANES Pitts M-12S Manuel utilisateur

NOCH

NOCH 14261 Manuel utilisateur

Hausler

Hausler 450 SE V2 Manuel utilisateur

Dynaflite

Dynaflite Daydream Manuel utilisateur

MiniacRC

MiniacRC MIGHTY MINI P40 WARHAWK Manuel

Kenner

Kenner Batman 63651 Manuel utilisateur

LEGO

LEGO 8527 Manuel utilisateur

iKarus

iKarus ECO 8 Manuel utilisateur

Multiplex

Multiplex EasyStar II Mode d’emploi

Walkera

Walkera 38 Mode d’emploi

Hasbro

Hasbro TRANSFORMERS BUMBLEBEE Manuel utilisateur

MD MXION SWD Manuel utilisateur

Mattel

Mattel Disney Pixar Cars Cozy Cone Spiral Rampway Manuel utilisateur

marklin

marklin 39671 Manuel utilisateur

Meccano

Meccano 15103 Manuel utilisateur

LEGO

LEGO TECHNIC 8735 Manuel utilisateur