
BBR Battery to Battery Charger Remote control
STERLING
POWER
The BB remote control (BBR) is designed to be used with Sterling Power’s range of Buck Boost Battery to
Battery Chargers (red casing with white text). The BBR is both a passive display of information and a remote
control that can input and modify the behaviour of the BB.
The remote comes with 3m of extension cable and the appropriate adapter. The remote can be flush mounted,
surface mounted or recess mounted. The tabs on the wings of the remote control can be taken off and 4x screw
holes can be used.
The remote is powered from the BB
Welcome
Installation
Diagram
2 main display screens
Making functional changes
Press and hold function button
for 4 seconds+ and let go to
enter functions.
Then use the cursor keys to toggle
through the options - press
ENTER to select a function. In
order for the remote control to
register any changes you must
toggle through to the ‘save and
exit’ option. If you do not do this,
the remote does not save the
settings.
connect cable to this port on BB
On/Off MENU ENTER
Power
Fault
Battery to Battery Charger - Remote Control
BBR
Turns screen on/off
Press and hold 4+ seconds
(then let go) to enter MENU
Press enter to make selection
Up and Down cursor keys to scroll
LEAD1 BULK
14V 40A
Output charge voltage
Battery Charge Profile
Output charge current
Charge status
When the remote is connected to the BB, the remote shall display the settings that have already been
programmed into the BB, previously. Once the remote is connected, changes can be made using the remote.
LEAD1 BULK
14V 40A
IGN&VIB: OFF
BATT_Temp: --
press arrows to toggle
default screen supplementary screen
informs if: ignition feed or vibration mode on/off
Batt_Temp - display temperature at sensor (if connected)
MENU
Functions and customisable features on the remote control. Below is a list of functions that can be selected by
the remote control. More information overleaf.
ŸBattery type - here you can change battery type, you can also select user defined setting (custom) - set as
below.
ŸEQ Mode - Enabling EQ mode shall put the BB into a desulphation cycle. Warning high voltage.
ŸFloat on/off - Here you can turn off float mode - only available in lithium
ŸIgn - Ignition mode, you can toggle whether the BB is in ignition mode or not. (on/off)
ŸBacklight - Here you can adjust how long the backlight stays on after you press a button (All, 10s-
250seconds).
ŸSet Current - here you can adjust the current levels to 65%, 85% or 100%.
ŸAlarm Buzzer - simple on/off setting, here you can turn remote buzzer on/off.
ŸUser defined setting 1 - here you can adjust absorption voltage, float voltage and absorption time lengths
ŸUser defined setting 2 - here you can adjust absorption voltage, float voltage and absorption time lengths