Quick S ar
Put 2 charged AA batteries in the battery cage.
Adjust the eye pieces to compensate for the distance
between the eyes.
Place the object of interest within the reticule looking
through the 3D VuCAM™ and use the round focusing
knob to focus to the left eye.
********************************
IMPORTANT: CALIBRATE BEFORE USE
********************************
piece.
Turn ON the 3D VuCAM™ by pressing POWER button.
Set CALIBRATION by going to Focus->Calibrate AF
->press ENTER->press POWER to come to main screen-
>press SHUTTER.
It will take ~ 10 seconds for the system to calibrate.
Hold the 3D VuCAM™ steady pointing at what you are
focusing till you hear first beep. If there is a problem
simply repeat calibration
After second beep the 3D VuCAM™ is ready for the
next shot.
All the shots after this will be faster to process.
You can use up and down arrows to view the left
center and right image of the shot captured.
Thank you for purchasing the 3D VuCAM™.
8
