Steren CCTV-200 Manuel utilisateur
Before using your new IP Color Camera read this instruction
manual to prevent any damage. Put it away in a safe place
for future references.
IMPORTANT
Do not try to open the equipment, may cause malfunction
Warranty is void if you open the case.
Do not use or store the equipment near wet places. May cause
malfunction or shock hazard.
Clean with a soft, dry cloth.
PACKAGE CONTENT
IP camera
AC power adaptor
CD-ROM with utilities
Ethernet cable
Metal base
User’s manual
SYSTEM REQUIREMENTS
Local area network: 10Base-T Ethernet or 100Base TX Fast
Ethernet
ActiveX & JAVA
Microsoft Internet Explorer 5.0 or better
Pentium III, 450MHz or higher
Memory size: 128MB recommended
VGA card resolution: 800x600 or better
Windows 2000, XP
CD-ROM drive
CONTROLS
1.- AC power adaptor
Allows you to plug the camera to an AC outlet
2.- RJ45 connector
Allows you to connect the camera to an available Ethernet port in
the computer
3.- In-use indicators
Light on when the camera is receiving or transmitting data
information
•
•
•
•
•
•
•
•
•
•
•
•
•
•
ENGLISH
ENGLISH-2
Before usin
g
y
our new IP Color Camera read this instruction
m
anual to prevent an
y
dama
g
e. Put it awa
y
in a safe place
f
or future references
.
4.- Extended connector
Allows you to connect a PIR or a relay
5.- Focus
Move this control to the left or right in order to get a sharper
image
6.- Base
1
2
3
4
5
6
ENGLISH
ENGLISH-3
EXTENDED CONNECTOR
1.- GND
2.- TX RS-232TX
3.- +5V (100mA) Power output
4.- GND
5.- ALM1 Alarm Input
6.- RLY RLY control
7.- RX RS-232 RX
8.- ALM1_G Alarm input GND
+5V Power output: it can supply power for relay or PIR,
maximum current is 100mA
Outer alarm input is a Closed Single RS232 only use for testing
HARDWARE INSTALLATION
1.- Plug the Ethernet cable into RJ-45 jack in the camera.
2.- Plug the extreme end of Ethernet cable into an available LAN
port.
3.- Plug the AC power adaptor in the corresponding input jack.
Then plug into an AC household outlet.
HOW TO INSTALL AND USE THE IP SOFTWARE
1.- Place the installation CD into the CD-ROM drive.
2.- Click over theIPCamSetup.exe icon, twice.
3.- In the followed windows, click Next to continue.
4.- Once the system installed the required files, you must restart
the PC.
5.- When the computer rebooted, a new icon will display in the
Windows desktop (IP camera tool). Click twice over the icon, a
new window pop-up where you can see the camera IP address
(in case of you have more than one connected camera, you will
see all the IP address).
ENGLISH
ENGLISH-4
6.- Click twice over the camera IP address.
7.- Then, Windows Explorer will run automatically.
8.- Type the password (this software do not includes a
predetermined password, just click Enter) then you can obtain
access to the camera.
The IP address is given automatically by the software,
however, you can configure the parameters manually, to do
it, refers to Manual Configuration.
IP ADDRESS MANUAL CONFIGURATION
Once you have connected and configured the camera, you can
change the parameters of the IP address.
1.- Run Up Camera Tool, in the screen you can see a window
with the IP address assigned by the software.
T
he IP address is
g
iven automaticall
y
b
y
the software,
however,
y
ou can confi
g
ure the parameters manuall
y
, to do
i
t, refers to Manual Confi
g
uration
.
ENGLISH
ENGLISH-5
2.- Click over the address, then use the right button of the
mouse, and you will see the next options:
Access IP Camera
Network settings
Firmware Version Upgrade
3.- To configure the IP address manually, select the option
Network Settings. A new window will display, on it you can type
the IP address, Subnet Mask. Gateway and DNS Server.
This information must be given by your ISP.
VIDEO WINDOW
1.- Run Up Camera Tool, in the screen you can see a window
with the IP address assigned by the software.
2.- Click twice over the IP address, Internet Explorer will run
automatically.
3.- Type the password (there is not a password assigned, by
default) then press Sign In to obtain access to the camera.
4.- Now you can visualize video images.
T
his information must be
g
iven b
y
y
our ISP
.
ENGLISH
ENGLISH-6
If you want to get remote access to the camera, type the IP
address showed in the IP camera tool window, into the
Internet Explorer address bar.
Up to 20 users can be glancing simultaneously.
If the first time you cannot see video, open the Internet
Explorer tools >>> Internet Options >>> Security, and then
enable the option: Download Unsigned ActiveX Controls.
I
f
y
ou want to
g
et remote access to the camera, t
y
pe the IP
add
ress s
h
owe
d
i
n t
h
e
IP
camera too
l
w
i
n
d
ow,
i
nto t
h
e
I
nternet Ex
p
lorer address bar
.
U
p to 20 users can be
g
lancin
g
simultaneousl
y.
I
f the first time
y
ou cannot see video, open the Internet
E
xplorer tools >>> Internet Options >>> Securit
y
, and then
e
nable the option: Download Unsi
g
ned ActiveX Controls
.
ENGLISH
ENGLISH-7
CONTROL AREA
Resolution
VGA (640x480) / QVGA (320x240)
Mode
50Hz / 60Hz / Outdoors
Parameters
Use this option to set Brightness, Contrast, Sharpness and bit
rate. To modify this parameters, type the value that you want to
use, or use + / - buttons.
If you want to use the predetermined values, click Default option.
ENGLISH
ENGLISH-8
Window Configuration
With this option you can visualize a full screen image, or a
multi-picture window ( a window divided in four, one per each
connected camera).
When a camera is in-use, a green button will be visualized.
ENGLISH
ENGLISH-9
Configuration
Click this option to obtain access the camera configuration,
where you can assign a camera alias, password, network
parameters, among other functions.
Basic setting
This window allows you to visualize the camera clock time,
camera alias, password, and confirm the new password.
Alarm setting
Use this menu to activate or deactivate the Image Motion Detect,
External Sensor Detect, and Alarm Notify by Mail options.
You can select more than one option.
DDNS Setting
Allows you to set DDNS parameters, we recommend leave the
predetermined options.
Network setting
With this option you can set the IP address manually.
Recommended only for advanced users.
SMTP Setting
Choose this option if you want to activate the predetermined
email or enter your email information, where you want to receive
the notifying alarms (only if you enabled this option). The
required information for this option must be given by your ISP.
ENGLISH
ENGLISH-10
Table des matières
Langues :
