SVW909 Sip Wifi phone User Manual
www.stephen-tele.com
4. Select 3 IP setting>1 use DHCP (If the WLAN you selected support DH P server), press right soft key or OK key to
enter change menu again. You can also select static IP, follow the indications, enter the IP address, net mask、
gateway, DNS address in turn. And back to change menu after the setup.
5. Select 4 save and use, press right soft key or OK key to enter the save and use menu.
6. Select 1 do not use, press right soft key or OK key enter WLAN Setting menu again, finish
WLAN setting.
C: SIP Server Registration
1.Wifi phone number setting
You should obtain Sip account information from your ITSP before you configure the phone.
Select 3 VOIP setting> change> VOIP identify> SIP number, press right soft key or OK key , input SIP phone number,
press right soft key or OK key and enter the VOIP change menu again.
2.SIP domain setting
Select 3 VOIP setting> change> VOIP identify> SIP domain, press right soft key or OK key ,input SIP server address,
press right soft key or OK key and enter the VOIP change menu again.
or
3.SIP server authentification
Select VOIP authentification>SIP user name/ password, then press right soft key or OK key and enter the VOIP
change menu.
and
4.SIP Server Setting
Select VOIP server> SIP server address/SIP proxy address, press right soft key or OK key and enter the VOIP change
menu.
or
Note:
1. Regularly your Sip Server will support STUN, and you don’t need to set stun in your handset to register to a Sip
server. But if your server doesn’t support STUN, you can find some open STUN resource through the internet,
and configure it to the handset.
2. The default port of the SVW909 is 5060, If you want to change it, you can add a”: “ after your sip server address,
and add the port number after the “:”
