2. Important Safeguards
2
PLEASE READ ALL INSTRUCTIONS BEFORE USING THIS ELECTRICAL APPLIANCE
Warning & Cautions
Only connect the Steiss 8 pump to a M60 mattress.
Only connect the master control unit of the
DX860
to a220-240V power source.
Place power cable and pump away from head end to reduce risk of strangulation or entanglement with
any cord, cable or pipe.
Keep the tubes free of kinks.
Disconnect the control unit power plug before moving the bed.
Do not unplug the control unit by pulling the cord.
Only use the DX860 products indoors.
Only use this product if it has an un-damaged cord or plug.
Keep the cord away from heated surfaces.
Do not use this product, if it has been dropped or damaged, or it has been submerged into water.
(Do return the product to a service centre to be examined and/or repaired).
Do not expose the control unit to humidity or direct moisture.
Operation Temp: 15 to 35 degree, 30% to 75% non-condensing
Never blocktheair openingsor insert anyobjectinto them.
Never place mattress on acouchor sofa where the air openingscouldbe blocked.
Do not sprayany aerosolsonto the mattress.
Note cleaning/washing instructions laterin manual.
Thisdeviceis not registered as AP/APG protected.
Do contact your service centre if this product is not working properly.
Use only manufacturer-approved parts when maintaining or repairing the Steiss DX860. Use
only manufacturer-approved accessories with this device.
control unit.
Use of other parts and accessories in conjunction with this device is not recommended.
The control unit can only be repaired by an authorized technician.
Re-positioning of the patient is always recommended when using an alternating pressure air mattress.
It is advisable to monitor product when used by, on or near children and physically/mentally challenged
individuals
If any pain, redness, irritation, numbness or swelling occurs while using cushion, please inform healthcare
professional for them to assess and evaluate the situation.
Should the carer decide to insert extra foam or place this mattress on top of another mattress, it is at all
times the carer’s responsibility to ensure that there is adequate/legal clearance from top of this mattress to
the top of the siderails.
In the event of an extended power failure, it is advisable to disconnect the air hose from the pump and
attach the transport clip.
Do remember to reconnect the mattress to the pump once the power has been re-established.
DX860
