Part 1: Steam Generator
User instructions
Attention: We are not responsible for the malfunction and damage from improper installation that does not comply with the user’s manual.
1. Make sure the model and the accessories are correct, including the voltage input.
2. Make sure the steam power is matched with the dimensions of the sauna room. Pay attention to the steam room's cubic feet
measurements and construction materials. If you have any problems, please refer to the Page 11 to get the correct information.
3. Make sure to read this manual carefully for correct and effective use.
4. We shall not be responsible for the product damage or malfunction caused by self-installation or the operation procedures which is
not in compliance with the Operation and Instruction Manual.
5. Please check the contents when the package arrives to assure it is in good condition. If you find any damage in the package,
please contact the transportation company or the supplier to claim any damage.
6. This product must be used indoors.
Choose your type of machine
Measure the length, width and height (foot) of the current steam shower or bathtub room.
Example;
L:7 x W:5 x H:8 = 280 Cubic Feet x 2 to get complete cubic measurement.
Important: The calculation formula for selecting the type of steam engine is for reference only. Due to the variability of the building, the
specifications and size illustration are used as guidelines only. If you have complete information, including actual blueprint, project instruction
and building details, you can select the type of steam unit required. Otherwise, the manufacturer will not be responsible for the selection of
the type of steam unit.
Maintenance of the steam engine
Important: Perform water discharge operation after each use.
1. Wait for the completion of automatic water discharge after each time of using the steam engine to make sure the water in the tank
is discharged completely before cutting off power supply.
2. There should not be any leakage or damage among the steam engine, steam nozzle, components and pipes. They should be
checked monthly.
3. Clean the water supply pipes of the steam engine once a year.
4. Check all the connections, faucets and connection terminal to see whether they become loose or are damaged due to overheating.
5. Check the furring/scaling accumulated in the water tank and electric heating tube. If the furring is thick, clean it (use diluted lemon
acid to soak for 15-30 minutes).
6. Remove the water level sensory needle four times per year to clean the furring/scaling in the needle.
Choosing proper location
Recommended locations for proper installation:
1. The steam box should not be located further than 16 feet away from the steam room.
2. The steam generator should not be installed in the steam room.
3. The steam generator should not installed outdoor or in any places that will influence the security of the machine.
4. Do not install it in any places where the water might freeze.
5. Do not install near flammable objects or chemicals (coal, gas, etc.)
6. The steam generator should be installed in a dry and ventilated place.
7. Make sure the steam generator is secured on the wall and is in horizontally positioned.
8. On the other three sides, there has to be minimum of 12inces of space left between steam generator and any other object.
9. The place where the machine is installed must be accessible for cleaning and possible service work.
10. The steam generator should be in a close proximity to a drain for convenient Water Drain Valve hook-up.
11. After use, the steam pipe, safety valve, drain valve, water pipe, steam outlet is still very hot.
12. Place steam outlet away from bathers.
Attention: install an exhaust fan outside of the steam room so that it can expel any excess steam for proper ventilation.
