Step 5. Please set resolution of your operating system to 1440*900@60HZ, and then
install your softwares and enjoy our fashionable computer.
Step 6. To power off the computer, please follow these steps, firstly, turn off the operating
system, secondly, press the POWER switch on the back of the computer. If you can't turn
off the operating system, please press the POWER button for four seconds and the
computer will be forced to shut down, and two seconds afterwards, the computer will
restart once again.
NOTE:
1.After installation of the sound driver, the default sound player of the computer is
two built-in front speakers of computer. If you want to use external active
loudspeaker, please connect the terminal to LINE OUT jack of the computer and
press MUTE key on the front keypad to mute the built-in front speakers. After the
computer enter power saving mode or standby mode, the built-in front speakers will
stop working temporarily, if you want to play music under these modes, please use an
external active loudspeaker.
2.After initial installation of the sound driver, the default setting of the microphone
is mute, please turn on it manually before using it.
7
FCC NOTE:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:(1)this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user's
authority to operate the equipment
For a Class B digital device or peripheral, the instructions furnished the user shall include
the following or similar statement, placed in a prominent location in the text of the
manual:
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
8
