StarTech.com PEX1000MMSC2 Manuel utilisateur

Manual Revision: 07/25/2014

For the most up-to-date information, please visit: www.startech.com

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

PEX1000MMSC2

PCI Express Gigabit Ethernet Multi Mode

SC Fiber Network Card

*actual product may vary from photos

Instruction Manual

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there

is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by

turning the equipment o and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other

protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not

represent an endorsement of a product or service by StarTech.com, or an endorsement of the

product(s) to which this manual applies by the third-party company in question. Regardless

of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby

acknowledges that all trademarks, registered trademarks, service marks, and other protected

names and/or symbols contained in this manual and related documents are the property of

their respective holders.

Instruction Manual

Table of Contents

Introduction............................................................................................1

Packaging Contents ................................................................................................................................. 1

System Requirements.............................................................................................................................. 1

Product Overview ..................................................................................2

Card................................................................................................................................................................ 2

Jumper.......................................................................................................................................................... 2

Installation .............................................................................................3

Hardware Installation .............................................................................................................................. 3

Driver Installation...................................................................................................................................... 4

Verifying Installation................................................................................................................................ 6

Software Utility ......................................................................................9

Connecting to a Network......................................................................9

Network Conguration ........................................................................................................................... 9

Card to Card Direct Conguration ...................................................................................................... 10

LEDs..........................................................................................................11

Specications..........................................................................................12

Technical Support ..................................................................................13

Warranty Information............................................................................13

Instruction Manual

Introduction

Packaging Contents

• 1x 1 Port PCI Express Gigabit Fiber Network Card

• 1x Low Prole Bracket

• 1x Driver CD

• 1x Instruction Manual

System Requirements

• PCI Express enabled computer with an available PCI Express slot

• Windows® 8 / 8.1 (32/64bit), 7 (32/64), Vista (32/64), XP (32/64), Windows Server®

2012, 2008 R2, 2003, Mac OS 10.5® and up (Tested up to 10.9), Linux 2.4.x, 2.6.x and

3.5.0, Microsoft Hyper-V®

Instruction Manual

Product Overview

Card

Jumper

Fiber Optic SC Female

Link LED

Activity LED

JP2 Jumper

Instruction Manual

Note: See the “Card to Card Direct Conguration” section on the following pages for

further detials on jumper conguration.

JP2 Jumper

Installation

Hardware Installation

WARNING! PCI Express cards, like all computer equipment, can be severely damaged

by static electricity. Be sure that you are properly grounded before opening your

computer case or touching your PCI Express card. StarTech.com recommends that you

wear an anti-static strap when installing any computer component. If an anti-static

strap is unavailable, discharge yourself of any static electricity build-up by touching a

large grounded metal surface (such as the computer case) for several seconds. Also be

careful to handle the PCI Express card by its edges and not the gold connectors.

1. Turn your computer o and any peripherals connected to the computer (i.e. Printers,

external hard drives, etc.). Unplug the power cable from the rear of the power

supply on the back of the computer and disconnect all peripheral devices.

2. Remove the cover from the computer case. See documentation for your computer

system for details.

3. Locate an open PCI Express slot and remove the metal cover plate on the rear of the

computer case (Refer to documentation for your computer system for details).

NOTE: This card will work in PCI Express slots of additional lanes (i.e.x4, x8, or x16

slots).

Instruction Manual

4. Gently insert the card into the open PCI Express slot and fasten the bracket to the

rear of the case.

NOTE: If installing the card into a small form factor/low prole system, replacing

the pre-installed full prole bracket with the included low prole installation bracket

may be necessary.

5. Place the cover back onto the computer case.

6. Insert the power cable into the socket on the power supply and reconnect all

other connectors removed in Step 1.

Driver Installation

Windows

NOTE: The card may auto-install using native drivers, however it is recommended

to use the procedure below to update to the latest driver version.

1. Upon starting Windows, if the Found New Hardware dialog appears on the screen,

cancel/close the window and insert the included Driver CD into the computer’s

CD/DVD drive.

2. If AutoPlay is enabled, select the “Open folder to view les” option when the

dialog appears.

3. Open the “PEX1000MMSC2_SFP2_Driver” folder, and run the “Setup.exe” application

within the appropriate Operating System folder for the system you are using.

Instruction Manual

4. If AutoPlay is disabled, browse to your CD/DVD drive, open the “PEX1000MMSC2_

SFP2_Driver” folder, and run the “Setup.exe” application within the appropriate

Operating System folder for the system you are using.

5. Follow any on-screen instructions to complete the software installation.

NOTE: You may be prompted to restart your system.

Instruction Manual

Mac OS

1. Insert the provided CD into your DVD/CD-ROM drive.

2. For OS 10.7 and up, browse to the “\PEX1000MMSC2_SFP2_Driver\MacOS\MacOS

10.7\Packages” folder on the disc and then run the “dstroot.pkg” application to start

the install.

NOTE: For OS 10.4-10.6, please run the appropriate“.pkg” application from the

applicable OS version folder for the system you are using.

3. Follow the on-screen instructions to complete the installation.

Verifying Installation

Windows

1. From the main desktop or start menu, right-click on “Computer” (“My Computer”

in XP), then select “Manage.”

2. In the Computer Management window, select “Device Manager” from the left

window panel. Windows 8.1 users can right click on the “Start” button and click

“Device Manager.”

Instruction Manual

3. Under the Network Adapters category should be a “Realtek PCIe GBE Family

Controller” device. “Right-click” on the device and select “Properties” to make sure

it is installed and working correctly.

Mac OS

1. Open the “System Proler” by clicking the Apple symbol in the top left corner, select

“About this Mac”, then select “More Info.”

2. On the next screen, select “System Report” and under the “Ethernet Cards”heading

within the “Hardware”category should be an “ethernet” device.

Autres manuels pour PEX1000MMSC2

Table des matières

Autres manuels StarTech.com Carte réseau

StarTech.com

StarTech.com P011GI-NETWORK-CARD Manuel utilisateur

StarTech.com

StarTech.com USB150WN1X1W Manuel utilisateur

StarTech.com

StarTech.com EC1000BT Manuel utilisateur

StarTech.com

StarTech.com ST1000SPEXI Manuel utilisateur

StarTech.com

StarTech.com USB150WN1X1 Manuel utilisateur

StarTech.com

StarTech.com ST20000SPEXI Manuel utilisateur

StarTech.com

StarTech.com PCIe 40G QSFP+ Manuel utilisateur

StarTech.com

StarTech.com ST1000SPEX43 Manuel utilisateur

StarTech.com

StarTech.com EC2000S Manuel utilisateur

StarTech.com

StarTech.com PEX1000MMSC2 Manuel utilisateur

StarTech.com

StarTech.com ST1000SPEX2 Manuel utilisateur

StarTech.com

StarTech.com PCI555WG Manuel

StarTech.com

StarTech.com PEX10000SRI Manuel utilisateur

StarTech.com

StarTech.com UE1200CB Manuel utilisateur

StarTech.com

StarTech.com ST1000SPEXD4 Manuel utilisateur

StarTech.com

StarTech.com ST1000SMPEX Manuel utilisateur

StarTech.com

StarTech.com ST1000SPEXD2 Manuel utilisateur

StarTech.com

StarTech.com CB1000BT Manuel utilisateur

StarTech.com

StarTech.com 8STST4000PEXPSE Manuel utilisateur

StarTech.com

StarTech.com PR12GIP-NETWORK-CARD Manuel utilisateur

StarTech.com

StarTech.com ST20000SPEXI Manuel utilisateur

StarTech.com

StarTech.com PEX10000SRI Manuel utilisateur

StarTech.com

StarTech.com ST1000SPEX42 Manuel utilisateur

StarTech.com

StarTech.com NETRS2321E Manuel utilisateur

Manuels Carte réseau populaires d'autres marques

FirstComm

FirstComm OBiWiFi5G Manuel utilisateur

Sun Microsystems

Sun Microsystems Interface Adapter Manuel utilisateur

TRENDnet

TRENDnet TU2-ETG Manuel utilisateur

YASKAWA

YASKAWA SI-EN3 Manuel utilisateur

Paradyne

Paradyne BitStorm 2600 IP DSLAM Manuel utilisateur

Belkin

Belkin F5D7050 Manuel utilisateur

3Com

3Com EtherLink 3C509B Manuel utilisateur

TRENDnet

TRENDnet TEG-PCITX Manuel utilisateur

Cisco

Cisco MC16E Manuel utilisateur

Delta Electronics

Delta Electronics Braking Modules VFDB Series Manuel utilisateur

TwinMOS

TwinMOS Booming Manuel utilisateur

Dialogic

Dialogic Media Board DM/V1200BTEPEQ Manuel utilisateur

Buffalo

Buffalo AirStation WLI-PCM-L11GP Manuel utilisateur

National Instruments

National Instruments NI 9234 Manuel utilisateur

Hama

Hama 49276 Manuel utilisateur

Linksys

Linksys WCF54G - Wireless-G Compact Flash Card Manuel d'utilisation

Compaq

Compaq Wireless LAN 100 Manuel utilisateur

Bose

Bose PowerMatch Dante Manuel utilisateur