6 PKG08812-QRGDFC
ENGLISH
Thank you for choosing the DFC Force Controller.
This Quick Reference Guide is an overview of the basic
functions available with your instrument. For detailed
instructions on instrument setup and operation, please refer
to the electronic user manual. You may download a copy
of the user manual at http://www.Starrett.com/u?dfc-um.
INTRODUCTION
The DFC may be used as a classic digital force gage. It may
also be used as a digital controller when connected to the
FMM Digital Force Tester.
The DFC, as a controller, is the only gage available that
lets you setup an automated test, including the operating
parameters of the force tester. Configure speed and
distance limits through the DFC.
STARRETT DFC ADVANCED FORCE GAGE
SPECIFICATION DFC
Accuracy, Full Scale 0.1%
Data Sampling (Hz) 25,000
Display Resolution 10,000:1
Safe Overload, Full Scale 200%
Maximum Tare 10%
COMMUNICATIONS
Bluetooth®Yes
USB 2.0 Yes
RS-232 Yes
Digital I/O 2 channels
Memory, saved results max. 99
OPERATING MODE
Machine Control1Yes
Real Time Yes
Peak Compression Yes
Peak Tension Yes
Load Limit Yes
Break Limit Yes
Load Average Yes
Load-Time Average Yes
Cyclic Count, Max. 99,999
Cyclic Duration, Max. 27 Hrs.
Hold Duration, Max. 27 Hrs.
Coefficient of Friction Yes
POWER, ENVIRONMENTAL
Battery Type Lithium Ion
Battery Life, @ 20% brightness >30 hours
Charge Time, using 110/240V Mains <3 hours
Display (OLED) 320 x 240
Operating Temperature 40°F to 110°F
(4°C to 43°C)
Thread, for adapters (Metric) M6, M10
Instrument Weight (approx.) 3 lbs
(1.36 kgs)
CE COMPLIANCE
EN61010-1 Safety for Electrical Equipment Yes
EN61000-6-3 EMC Generic Emissions Yes
EN61000-6-1 EMC Generic Immunity Yes
NOTES
1. Machine control is exclusive to the DFC. When
connected to the FMM digital force tester,
configuration of force gage and tester is
performed through the gage.
