Star Trac 700-0008 Manuel de programmation
Star Trac Group Cycling Computer
Owner’s Manual and Installation Guide
700-0008
Group Cycling Computer
Owner’s Manual and Installation Guide 1
NOTE: When printing this manual from a PDF file, print using “booklet”
style printing to print a folded, 5.5” x 8.5” manual on 8.5” x 11” sheets.
Group Cycling Computer
Owner’s Manual and Installation Guide 2
Table of Contents
Certifications ...........................................................................................3
Specifications..........................................................................................4
Group Cycling Computer Kit Contents.................................................5
Group Cycling Computer Bracket Mount Compatibility .....................7
Computer Mounting Instructions ..........................................................9
Star Trac Studio 3: Mounting the computer using the double-loop
mount .........................................................................................12
Star Trac Studio 5 and Studio 7: Mounting the computer using
the clamp mount.........................................................................12
Cadence Sensor Mounting Instructions.............................................13
External Cadence Sensor Mounting ..........................................13
Internal Cadence Sensor Mounting on the Studio 5 and Studio 7
...................................................................................................16
Pairing the Computer to the Cadence Sensor ...................................19
Pairing a Heart Rate Transmitter and Setting Personal Settings.....21
Instructions on Using the Group Cycling Computer.........................24
Maintenance...........................................................................................26
Frequently Asked Questions ...............................................................27
Contact Information..............................................................................31
Group Cycling Computer
Owner’s Manual and Installation Guide 3
Certifications
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by Star Trac could
void the user’s authority to operate the equipment
FCC ID: QSWASPDCS
EU Declaration of Conformity
This device complies with the essential requirements of the R&TTE
Directive
1999/5/EC.
This computer is ANT+ certified.
NOTE: The users’device must be ANT+ compatible and capable of
receiving the data files broadcast by the ANT+ chip. Users should
consult with the documentation for their device, or check the ANT+
website at www.thisisant.com for compatibility.
Group Cycling Computer
Owner’s Manual and Installation Guide 4
Specifications
Features:
ANT+ 2.4 Ghz and 5.4 Khz analogue wireless heart rate receiver
technology
Low power consumption for long battery life
Coded memory during battery replacement
On-screen data display:
Cadence
Heart rate, average heart rate, % of maximum
heart rate
Session time, KCALS, and distance
Low battery indicator
Scan function to scan between session time, KCALS, and
distance
Advanced energy expenditure algorithm for personalized KCALS
(Calories)
Bright LED screen backlight
General:
ANT+ cadence sensor data profile
Batteries Required
Console: (3) AAA batteries
Cadence sensor receiver: (1) CR2032 lithium coin
cell battery
FCC ID: QSWASPDCS
CE Compliant
ANT+ Certified
RoHS Compliant
Group Cycling Computer
Owner’s Manual and Installation Guide 5
Group Cycling Computer Kit Contents
Table 1
Item
Description
Qty
1
Group Cycling Computer
1
2
AAA batteries
3
3
M5 x 10mm screws, computer mount
3
4
Rubber computer mount pad
1
5
M5 x 10mm screws, back plate mount
4
6
Flat computer mount bracket
1
7
Flat computer mount back plate
1
8
M5 x 30mm screws, back plate mount
4
9
Spacers, back plate mount
4
10
Double-loop mount bracket
1
11
Single-loop mount bracket
1
12
M5 x 25mm screws, single-loop and double-loop mounts
2
13
Rubber pads, single-loop and double-loop mounts
4
Group Cycling Computer
Owner’s Manual and Installation Guide 6
14
Cadence sensor
1
15
Foam cadence sensor mount
1
16
Cadence sensor mount adhesive
1
17
Magnet mount
1
18
10mm x 5mm cadence sensor magnet
1
19
12.5mm x 3mm cadence sensor magnet
1
Tools Needed for Assembly (Not Included in the kit):
1. Philips head screwdriver
2. 3mm hex key
Group Cycling Computer
Owner’s Manual and Installation Guide 7
Group Cycling Computer Bracket Mount Compatibility
The Star Trac Group Cycling Computer is compatible with all Star Trac
Studio series group cycling bikes, as well as older model bikes
previously manufactured by Star Trac as indicated in the table below.
Table 2
Model
Number
Model Name
Compatible Bracket Components
7280
Studio5
7290
Studio7
7170
NXT
7230
NXT Black Belt
7190
Blade
7240
Blade Belt
7160
Pro+
7270
Studio3
7150
Velo
7270
Studio3
Group Cycling Computer
Owner’s Manual and Installation Guide 8
Model
Number
Model Name
Compatible Bracket Components
7090
NXT
7000
NXT
7070
Pro
7080
Elite
Group Cycling Computer
Owner’s Manual and Installation Guide 9
Computer Mounting Instructions
1. Locate the computer and cadence sensor transmitter (see Figure
1). Prior to installing the batteries, note the pairing code on the back
of the computer and sensor. Use this number to check for proper
pairing beginning in Step 2.
Figure 1
2. With cap removed - install TWO of the AAA batteries inside the
computer (see Figure 2).
NOTE: Before installing the third battery, follow the
instructions on page 19 for pairing the sensor to the computer.
Figure 2
Table des matières
Autres manuels Star Trac Accessoires pour vélos
