Stagg Baryonic 24 Manuel utilisateur

USER MANUAL

Baryonic 24

SLB-244-41

Please read the instructions carefully before use

SAFETY INSTRUCTIONS

Please read the instructions carefully as they include important

information about the installation, operation and maintenance.

• Please keep this user’s guide for future consultation. If you sell the unit to another

user, be sure that they also receive this instruction booklet.

• All fixtures leave the manufacturer intact. Please note that any damages incurred

by the user is not covered by the guarantee.

• Unpack and check carefully that there is no transportation damage before using the

unit.

• The unit is for indoor use only. Use only in a dry location.

• Use a safety bond when attaching the fixture to a lighting rig. Handle by the

hanging bracket when fixing.

• The unit must be installed in a location with adequate ventilation at least 50 cm

from adjacent surfaces.

• Make sure that no ventilation slot is blocked, otherwise the unit will overheat.

• Before operating, ensure that the voltage and frequency of the power supply match

the power requirements of the unit.

• Make sure all equipment is properly earthed.

• Do not operate the unit if the ambient temperature is higher than 40°C.

• Do not hardwire to any mains dimmer.

• On the first start, there may be some normal operational start-up smell.

• Make sure that there is no flammable material close to the unit while operating, as

it is a fire hazard.

• Examine power wires carefully and replace immediately if there is any damage.

• Never run on for a long time lest shortening lifespan. Avoid any inflammable liquids,

water or metal objects entering the unit. In case it happens, cut off the mains power

immediately.

• Do not operate in a dirty or dusty environment. Clean fixtures regularly.

• Do not allow children unsupervised to operate the fixture.

• Do not touch any wire during operation as there might be a hazard of electric

shock.

• Avoid placing power wires next to other cables.

• Disconnect the mains power before replacing or servicing the fuses.

• Replace fuse only with the same type.

• In the event of a serious operating problem, stop using the unit immediately.

• Never turn on and off the unit time after time.

• The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly

damaged.

• Do not open the unit as there is no user serviceable part inside.

• Never try to repair the unit by yourself. Repairs carried out by unskilled people can

lead to damage or malfunction. Please contact the nearest authorized technical

assistance centre.

• Disconnect the mains power if the fixture is not used for a long time.

• Use the original packaging to transport regarding any warranty issue.

• Do not look directly at the LED light beam while the fixture is on.

• Do not connect more than 7 units to the same power source.

INSTALLATION

The feet should be mounted on each sides of the unit. Always ensure that the unit is

firmly fixed to avoid vibration and slipping while operating. Always ensure that the

structure to which you are attaching the unit is secure and able to support 10 times

the unit’s weight. Also, always use a safety cable that can hold 12 times the unit’s

weight when installing the fixture.

The equipment must be fixed in an appropriate place by professionals. Keep it out of

the reach of unqualified people.

TECHNICAL SPECIFICATIONS

Architectural colour bar with 24x4w 4in1 RGBW LED

- LED: 24x4W 4in1 RGBW

- LED beam angle: 35°

-Functions: colour chaser, strobe and colour mix

- Protocol: DMX 512. 6, 9, 16, 30 or 58 channels

- Control modes: DMX 512, master/slave, sound activation, automatic,

remote control

- Connectivity: 3-pin XLR cable and IEC

- 4-Digits on rear panel

- Power consumption: 100W

- Weight: 4kg (8.8lb)

- Dimensions: 110 x 10 x 10 cm (4.3“ x 0.4“ x 0.4“)

- Included: Mounting feet

SETTING UP THE DEVICE

DMX Mode

With the menu button, select the DMX mode (dxxx) and press the enter key to

confirm. Then use the up and down buttons to choose the desired DMX channel (1 –

512) and press the enter key to confirm. Press the menu button to return to the main

menu.

Use the menu button and the up and down buttons and go to “Chnd” to select the

desired Dmx channel mode: 6, 9, 16, 30 or 52 channels. See following charts for

channels functions information.

6 Channels:

Channel

Value

Function

0-255

Red 0-100%

0-255

Green 0-100%

0-255

Blue 0-100%

0-255

White 0-100%

0-255

See Colour

Chase Table

0-255

Chase Speed

Slow to Fast

9 Channels:

Channel

Value

Function

0-255

All dimming

0-255

Strobe

0-255

Red 0-100%

0-255

Green 0-100%

0-255

Blue 0-100%

0-255

White 0-100%

0-255

Auto program

0-255

See Colour

Chase Table

0-255

Chase Speed

Slow to Fast

16 Channels:

Channel

Value

Function

0-255

All dimming 1

0-255

Strobe

0-255

Red 1 0-100%

0-255

Green 1 0-100%

0-255

Blue 1 0-100%

0-255

White1 0-100%

0-255

Auto program

0-255

All dimming 2

0-255

Strobe

0-255

Red 2 0-100%

0-255

Green 2 0-100%

0-255

Blue 2 0-100%

0-255

White2 0-100%

0-255

Auto program

0-255

See Colour Chase Table

0-255

Chase Speed Slow to Fast

30 Channels:

Channel

Value

Function

0-255

All dimming 1

0-255

Strobe1

0-255

Red 1 0-100%

0-255

Green 1 0-100%

0-255

Blue 1 0-100%

0-255

White1 0-100%

0-255

Auto program1

0-255

All dimming 2

0-255

Strobe2

0-255

Red 2 0-100%

0-255

Green 2 0-100%

0-255

Blue 2 0-100%

0-255

White2 0-100%

0-255

Auto program2

0-255

All dimming 3

0-255

Strobe3

0-255

Red 3 0-100%

0-255

Green 3 0-100%

0-255

Blue 3 0-100%

0-255

White3 0-100%

0-255

Auto program3

0-255

All dimming 4

0-255

Strobe4

0-255

Red 4 0-100%

0-255

Green 4 0-100%

0-255

Blue 4 0-100%

0-255

White4 0-100%

0-255

Auto program4

0-255

See Colour Chase Table

0-255

Chase Speed Slow to Fast

58 channels:

Channel

Value

Function

0-255

All dimming 1

0-255

Strobe1

0-255

Red 1 0-100%

0-255

Green 1 0-100%

0-255

Blue 1 0-100%

0-255

White1 0-100%

0-255

Auto program1

0-255

All dimming 2

0-255

Strobe2

0-255

Red 2 0-100%

0-255

Green 2 0-100%

0-255

Blue 2 0-100%

0-255

White2 0-100%

0-255

Auto program2

0-255

All dimming 3

0-255

Strobe3

0-255

Red 3 0-100%

0-255

Green 3 0-100%

0-255

Blue 3 0-100%

0-255

White3 0-100%

0-255

Auto program3

0-255

All dimming 4

0-255

Strobe4

0-255

Red 4 0-100%

0-255

Green 4 0-100%

0-255

Blue 4 0-100%

0-255

White4 0-100%

0-255

Auto program4

0-255

All dimming 5

0-255

Strobe5

0-255

Red 5 0-100%

0-255

Green 5 0-100%

0-255

Blue 5 0-100%

0-255

White5 0-100%

0-255

Auto program5

0-255

All dimming 6

0-255

Strobe6

0-255

Red 6 0-100%

0-255

Green 6 0-100%

0-255

Blue 6 0-100%

0-255

White6 0-100%

0-255

Auto program6

0-255

All dimming 7

0-255

Strobe7

0-255

Red 7 0-100%

0-255

Green 7 0-100%

0-255

Blue 7 0-100%

0-255

White7 0-100%

0-255

Auto program7

0-255

All dimming 8

0-255

Strobe8

0-255

Red 8 0-100%

0-255

Green 8 0-100%

0-255

Blue 8 0-100%

0-255

White8 0-100%

0-255

Auto program8

0-255

See Colour Chase Table

0-255

Chase Speed Slow to

Fast

Colour Chase Table

Colour Chase

000-007 No function

No Function

008-022 Colour Chase 01

Colour Effect 1

023-037 Colour Chase 02

Colour Effect 2

038-052 Colour Chase 03

Colour Effect 3

053-067 Colour Chase 04

Colour Effect 4

068-082 Colour Chase 05

Colour Effect 5

083-097 Color Chase06

Colour Effect 6

098-112 Colour Chase 07

Colour Effect 7

113-127 Colour Chase 08

Colour Effect 8

128-142 Colour Chase 09

Colour Effect 9

143-157 Colour Chase10

Colour Effect 10

158-172 Colour Chase 11

Colour Effect 11

173-187 Colour Chase 12

Colour Effect 12

188-202 Colour Chase 13

Colour Effect 13

203-217 Colour Chase 14

Colour Effect 14

218-232 Colour Chase 15

Colour Effect 15

233-247 Colour Chase 16

Colour Effect 16

248-255 Sound active

Sound Effect 1-16

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Stagg Matériel de DJ

Stagg

Stagg KINGPAR 5 Manuel utilisateur

Stagg

Stagg ECOPAR2 Manuel utilisateur

Stagg

Stagg SARI-BARIO1 Manuel utilisateur

Stagg

Stagg CITY BEAM Manuel utilisateur

Stagg

Stagg EcoPar186 Manuel utilisateur

Stagg

Stagg TRANCE60 Manuel utilisateur

Stagg

Stagg EcoPar18 Manuel utilisateur

Stagg

Stagg CLASSICPAR 36 Manuel utilisateur

Stagg

Stagg EcoPar36 Manuel utilisateur

Manuels Matériel de DJ populaires d'autres marques

ALPHA LITE

ALPHA LITE ALPHA 1500 Manuel du propriétaire

Chauvet

Chauvet OVATION E-930VW Manuel utilisateur

Zumtobel

Zumtobel APHRODITE Home Manuel utilisateur

Snow Masters

Snow Masters Zig Oscillator Manuel utilisateur

EuroLite

EuroLite 50530554 Manuel utilisateur

Beamz

Beamz BUV243 Manuel utilisateur

thomann

thomann Stairville DJ Lase 40-G MK-III Manuel utilisateur

Eagletone

Eagletone 6 Eyes Flower Manuel utilisateur

EuroLite

EuroLite FLD-1508 Manuel utilisateur

Technical Pro

Technical Pro LG8xSEA Manuel utilisateur

JB Systems

JB Systems Lounge Laser DMX Manuel utilisateur

Lightmaxx

Lightmaxx Vega Halo 90 Manuel utilisateur

Elation

Elation FUZE WASH Z350 Manuel utilisateur

Maverick

Maverick MK3 WASH Manuel utilisateur

Infinity

Infinity TF-260C7 Fresnel Manuel utilisateur

Chauvet

Chauvet EVE E-50Z Manuel utilisateur

Eliminator Lighting

Eliminator Lighting E 138 Manuel utilisateur

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manuel utilisateur