SSD Drives TS8000 Series Manuel utilisateur
TS8000
Link RTN Option
8000/LK/00
HA470411U001 Issue 1
WWW.SDS.LTD.UK | 0117 9381800
© Copyright SSD Drives, Inc. 2005
All rights strictly reserved. No part of this document may be stored in a retrieval system, or
transmitted in any form or by any means to persons not employed by an SSD Drives
company without written permission from SSD Drives, Inc.
Although every effort has been taken to ensure the accuracy of this document it may be
necessary, without notice, to make amendments or correct omissions. SSD Drives cannot
accept responsibility for damage, injury, or expenses resulting there from.
Companies, names and data used as examples herein are fictitious unless otherwise
stated. All trademarks and copyrights are acknowledged as the property of their
respective owners.
WWW.SDS.LTD.UK | 0117 9381800
Table Of Contents TS8000 Option Card
Table of Contents
Product Overview ............................................................................................ 3
General Description ....................................................................................... 3
Safety Information..........................................................................................4
Contents Of Package .....................................................................................4
Specifications .................................................................................................. 5
Power Requirements.......................................................................................5
Serial Communications .................................................................................. 5
Fiber Optic Communications ..........................................................................5
Installation Instructions ..................................................................................... 7
Hardware Diagnostics ...................................................................................... 9
Module LED Status .........................................................................................9
Network LED Status........................................................................................9
Diagnostic Codes......................................................................................... 10
Software Configuration................................................................................... 11
Configuring The Link System......................................................................... 11
Configuring The TS8000 HMI ....................................................................... 13
Version 1.00.00 Page i
WWW.SDS.LTD.UK | 0117 9381800
Product Overview TS8000 Option Card
Product Overview
•Configured with DSD software.
•Noise-free fiber optic interface to any other
devices on the high speed Link network. RS-
232 serial comms interface to the TS8000
HMI.
•24vDC powered by an external supply.
•DIN rail mountable for ease of use.
•Installation and connection hardware
included with card.
General Description
The 8000/LK/00 option card provides a high speed interface (2.7Mbit) between the
TS8000 series HMI and a Link fiber optic network. This module is similar to a 6055/LINK
TechBox, but can be mounted on standard DIN rail instead of being plugged into a drive.
The option card has two fiber optic terminals that accept 1000 micron acrylic fiber. The
transmit strength over the Link network can be adjusted via a 3-position toggle switch. In
addition, the option card also provides a standard RJ-style serial jack for connection to a
TS8000 HMI.
The 8000/LK/00 requires the use of an external 24vDC power supply connected to
terminal block TB1.
Page 3 http://www.SSDdrives.com
WWW.SDS.LTD.UK | 0117 9381800
Product Overview TS8000 Option Card
Safety Information
All safety related regulations, local codes and instructions that appear in the manual or on
equipment must be observed to ensure personal safety and to prevent damage to either
the instrument or equipment connected to it. If equipment is used in a manner not
specified by the manufacturer, the protection provided by the equipment may be impaired.
Do not use the controller to directly command motors, valves, or other process actuators
not equipped with safeguards. To do so can be potentially harmful to persons or
equipment in the event of a fault to the controller.
Contents Of Package
The option card will come shipped with the following additional equipment:
•8000/LK/00 option card.
•Hardware mounting packet.
Page 4 http://www.SSDdrives.com
WWW.SDS.LTD.UK | 0117 9381800
Specifications TS8000 Option Card
Specifications
The following specifications pertain to the TS8000 series option cards. SSD Drives retains
the right to modify specifications at any time, without prior notice.
Power Requirements
Power is supplied to the option card from an external 24vDC supply connected to terminal
block TB1 (200mA rated inrush, 65mA steady state).
Serial Communications
Cable Type: SSD Drives part number CM471054 (Standard TS8000 Comms).
Fiber Optic Communications
Fiber Type: SSD Drives part number CM056316U030.
•Core Diameter: 1000 micron.
•Cable Type: Acrylic.
•Bending Radius: > 1 inch (25.4 mm).
•Insulation: Vinyl > 1kV.
Transmit Strength Settings: Switch SW1.
•Center Position: Low intensity – 0-20 m transmit range (0-66 ft).
•Up Position: Medium intensity – 21-40 m transmit range (67-132 ft).
•Down Position: High intensity – 41-60 m transmit range (133-196 ft).
Page 5 http://www.SSDdrives.com
WWW.SDS.LTD.UK | 0117 9381800
Installation Instructions TS8000 Option Card
Installation Instructions
The following specifications pertain to the TS8000 series option cards. SSD Drives retains
the right to modify specifications at any time, without prior notice.
To install the option card, remove all power and I/O communication cables from the unit.
Snap the 8000/LK/00 onto a standard DIN rail.
Connect the RS-232 cable from the option card to the RS-232 Comms port of the TS8000.
Connect the Receive Fiber into the black connector and the Transmit Fiber into the blue
connector. The fiber optic loop should be closed with the Link network as shown below:
Connect external 24v DC power to both the TS8000 and the 8000/LK/00.
Page 7 http://www.SSDdrives.com
WWW.SDS.LTD.UK | 0117 9381800
Table des matières
Manuels Écran tactile populaires d'autres marques
IBASE Technology
IBASE Technology ASTUT-152-RE1S Manuel utilisateur
YASKAWA
YASKAWA TP 610C Manuel utilisateur
B&R
B&R Power Panel C Series Manuel utilisateur
Beijer Electronics
Beijer Electronics X2 control Manuel utilisateur
AXIOMTEK
AXIOMTEK GOT321W-521 Manuel utilisateur
TRIDONIC.ATCO
TRIDONIC.ATCO x-touchBOX Manuel utilisateur
